Smartbox Joycable User manual
Joycable
Manual
Introduction
Connect two switches to your Windows
based PC with the Joycable USB
accessory.
Getting started
Plug the USB into a free port on your
device.
Plug one or two switches into the
3.5mm ports on the switch box.
1
2
Using Joycable with Grid 3
To configure your Joycable in Grid, go to:
Settings - Access - Switches.
New to Grid?
Grid software is designed to help you
communicate, control your environment
and do more with any type of alternative
access.
Try Grid today with a 60 day free trial at:
thinksmartbox.com/try-grid
Using Joycable with Switch Driver 6
The Joycable can be used in other
software that supports game controllers
or joysticks as an input method.
Switch Driver 6 is our free application
that enables you to do more with your
switches. You can set up your switches
to emulate any keyboard press or mouse
action, making them compatible with
virtually any switch operated software.
thinksmartbox.com/switch-driver-6
For more information on Joycable,
please visit the Smartbox Hub:
hub.thinksmartbox.com/joycable4
Joycable - Manual - UK – A
