SMARTdesks getaway GET-GW-108 User manual

Getaway™ User’s Manual
800 770 7042
www.smartdesks.com

Getaway™User’s Manual
Cau ons & Warnings
WARNING: FAILURE TO FOLLOW CAUTIONS AND WARNINGS BELOW COULD RESULT IN ELECTRICAL SHOCK, FIRE, PROPERTY DAM-
AGE, PERSONAL INJURY OR DEATH.
Cauons:
 Read Instruc ons · Read all warnings and opera ng instruc ons before using.
 Never use in a wet environment. Never allow liquid of any kind to spill onto or enter any part of the product.
 Retain Instruc ons · Retain this Owner’s Manual for future use.
 Follow Warnings · Read and follow all warnings and instruc ons in this Owner’s Manual and marked on Equipment.
 Service · There are no user serviceable parts in this product unless described in the following pages. Do not open or modify this
product in any manner.
Warnings:
 Power Source · This product is only to be operated from the power source indicated on the product. Use only with a grounded
(neutral) conductor. For safety do not bypass or disable the third (grounding) pin.
 Power Disconnec on · To remove powered devices safely grasp device plug and pull straight from powered outlet. Do not pull
on device cord or remove plug from any angle other than straight from outlet. Never touch metal conductors on plug during
connec ng or removal from product.
 Power Cord · Route power cords where they will not be stepped on, pinched, have items placed on them or become a tripping
hazard. Never allow power cords to sit in any liquid or get wet in any manner.
 Loca on · This product is intended to be used in a dry environment only.
Getaway
The Getaway uses 4 HDMI “Share” cables, connected to a digital switcher which attached via a 15’ HDMI monitor
cord (provided) to a single monitor screen. Through the simple push of the “share” button, users can change what is
displayed on the monitor screen. The Getaway also provides 4 120 volt power outlets and 4 2.1 a USB connections
for charging devices such as tablets or cell phones with a 108” power cord. A padded carrying case is provided for
easy transportation.
Part Number Finish
GET-GW-108 Gloss White Powder Coat
GET-S-108 Silver Pearl Powder Coat
GET-GB-108 Gloss Black Powder Coat

Surface Prepara on:
1. Place the Getaway in the desired loca on for use. The surface should be at and support the Getaway se-
curely.
Mounng to Work Surface:
1. If you are moun ng without an exis ng grommet hole, drill a 1/4” hole thru the work surface in the desired
loca on.
2. Select the correct thumbscrew length for your table thickness from the chart below. Place the washer over
the thumbscrew before inser ng the screw through the bracket. Feed the thumbscrew/bracket assembly
through the moun ng hole in the work surface and into threaded inserts on bo om of Getaway.
Table thickness
1.50”-1.25”use 2.00” long thumbscrews
1.00-.75” use 1.50” long thumbscrews
5. Tighten the thumbscrew un l the Getaway is secure, do not over ghten thumbscrews.
Making Connec ons:
1. Connect the 15’ HDMI cable provided between the Getaway’s HDMI out port, see Fig. 2, and The monitor’s
input port.
2. Connect power cord to a 120VAC outlet.
Opera on:
1. To verify that the switcher is opera ng as designed, connect two or more inputs devices (laptops or tab-
lets) to the user HDMI “Share” cords and switch the display between the units. If no image is displayed on
the monitor, conrm the monitor’s input se ng is correct, and conrm the monitor to Marina output and
share cable connec ons are secure.
2. When done using the Getaway in a mobile applica on, disconnect the share cables from the devices being
used, press the latch located on the lid of the Getaway to access the storage compartment and place the
cables inside. If using in a mobile applicaon, disconnect the HDMI monitor cord and place in storage com-
partment and close the lid. Unplug the power cord and wrap around the Getaway’s integral feet and se-
cure with magne c disc.
Getaway™User’s Manual

Getaway™User’s Manual
Grommet hole or
drill ¼” hole
Thumb Screw
Washer
Moun ng Bracket
Moun ng to Work Surface Installa on:
Connec ons:
Fig. 1
Fig. 2
HDMI out port
Power Cord
Integral Feet for cord wrap

Getaway™User’s Manual
Warranty
This product is warranted for a period of one (1) year from the date of purchase. This warranty is null and void in the case of
abuse, uses outside its normal intended use, or field modifications made in any manner.
Getaway™ technical specica on:
 Product Dimensions: 14.75” L x 11.75” W x 4.62” H
 Power
 4, 120 VAC spill resistant receptacles.
 4, USB charging ports that work with USB compa ble devices. Each pair capable of (2.1A, 11 Wa s, 5V/DC.)
 Integral circuit breaker protec on. (located inside cable bay)
 Video
 Extron:
4x1 HDMI Switcher
HDMI Show Me cables
 Maximum data rate—6.75 Gbps (2.25 Gbps per color)
 Maximum pixel clock—165 MHz
 Formats—RGB and YCbCr digital video
 Standards— HDMI
 Input— 4
 Output— 1
 Regulatory compliance
 Safety—cETLus
 EMI/EMC—CE, C ck, FCC Class A, ICES, VCCI
 Environmental—complies with appropriate requirements of RoHs and WEEE.
 Carry Case
 Shipping
 Weight—18 lbs.
 Carton— 17.75” L x 16” W x 6” H