iPuray BRT-109 User manual

Product Description of BRT-109 Page 1of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Glass Touch Screen Timer Switch
Model #：BRT-109
Features:
BRT-109 is a glass touch screen timer switch which is controlled by a micro controller unit and
has timing capability for two separate loads. It is designed for easy installation and retrofit,
directly fit into standard wall box where both “hot” wire and neutral wire are present.
High quality glass as faceplate, luxury and elegant;
Control over up to 2 loads. Each load can have a delay-off time of 30 seconds or instant
on/off;
Easy to use. A gentle touch will turn on or turn off the load;
Good for all kinds of loads (resistive, inductive, or capacitive);
Can be used as night light. All the buttons are always lit by blue backlights, so they are easy
to find even in the dark;
Costume color and pattern available;
ABS-V0 flame resistance material; and
Classical 86 series design and high quality build.
Front View and Back View:
Fig. 1 and Fig. 2 show the front view and the back view of the BRT-109 glass touch screen timer
switches respectively.
Fig. 1 Front View Fig. 2 Back View

Product Description of BRT-109 Page 2of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
There are two on/off buttons and one Off button on the front, and there are wiring terminal blocks
on the back. The buttons are backlit with blue lights.
Specification Parameters:
Input Voltage
180～250V(50Hz/60Hz)
Operation
Environment
No-condensation 20-90% RH，
-20℃～55℃
Wattage
Resistive: 1000W/Load
Inductive: 500W/Load
Capacitive: 200W/Load
Load type
All Types
Mounting Hole
Spacing
60mm
Matching
Box
75mm x 75mm x 50mm
Dimension
86mm x 86mm x 36mm
Weight
140 g
Wiring Diagram and Installation Guide:
BRT-109 glass touch screen timer switch requires both hot wire and neutral wire for installation:
Hot wire (ACL): Coming from the power line with 220V;
Neutral wire (ACN): Usually coming with the hot wire; and
Load wire: Going to the load.
Fig. 3 BRT-109 Wiring Diagram
Warning: Please make sure power is turned off before starting installation!
Fig. 3 shows the wiring diagram and Fig. 4 shows the step-by-step installation instructions. There
are three easy steps:
Step one: Use a screwdriver to pry off the front plate in position A;

Product Description of BRT-109 Page 3of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Step two: Wiring according to the diagram and the labelled ports of the switch; and
Step three: Install the switch to the wall box using screws and put back the front plate.
Fig. 4 BRT-109 Installation Guide
BRT-109 Operation Guide:
Switch on/off the load: After BRT-109 is powered on, touching each of the 2 on/off buttons
will turn on or turn off the loads respectively, when the delay-off function is not setup.
Touching the Off button will turn off all the loads in the same time.
When a load is turned on, the corresponding button will become brighter in blue.
Set up delay-off function: Use a screwdriver to pry off the front plate to access the dip
switches as shown in Fig.5. Switching the first two dip switches to on will set up each on/off
button for delay-off operation respectively.
The delay-off time is set at 30 seconds at factory. Please talk to our sales representative if
other customized settings are required.

Product Description of BRT-109 Page 4of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Fig. 5 Dip Switches for Activating Delay-off Time
Activate delay-off function: Once the delay-off function is set up, touching the on/off
button once will turn on the load, and touching the on/off button the second time will trigger
delay-off for the load. The blue LED indicator will blink until he load is automatically turned
off after 30 seconds.
During the delay-off time countdown, touching the On/Off button will turn off the load
immediately.
Applications:
BRT-109 glass touch screen timer switch can be used for automatically turning on and/or turning
off various loads such as fans, lights, appliances, or other kinds of electrical equipment. They are
perfect for saving energy and bringing convenience and safety to our daily life and work.
They have wide applications at various locations such as homes, hotels, schools, laboratories,
hospitals, offices, etc.
How to Order:
Please contact us: Shenzhen Asia Bright Industry Co., Ltd
Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China
Tel: [phone] [phone]
Fax: [phone] [phone]
Email: [e-mail] Website: www.a-brt.com