Smartharvest SRTS-6M User manual

Thank you for purchasing an SRTS-6M, a product of SmartHarvestTM by
OutBack Power. The SRTS-6M is a remote temperature sensor used to
get an accurate indication of the battery temperature to improve
battery charging. When used with compatible SmartHarvest products,
it adjusts battery charging thresholds to prolong battery life and
reduce service cycles. In higher ambient temperatures, battery
charging regulation settings will be automatically reduced to prevent
overcharging of the batteries.
Thank you for purchasing an SRTS-6M, a product of SmartHarvestTM by
OutBack Power. The SRTS-6M is a remote temperature sensor used to
get an accurate indication of the battery temperature to improve
battery charging. When used with compatible SmartHarvest products,
it adjusts battery charging thresholds to prolong battery life and
reduce service cycles. In higher ambient temperatures, battery
charging regulation settings will be automatically reduced to prevent
overcharging of the batteries.


Operating / storage
Temperature
-10°C to + 85°C
NTC Resistance at 25°C
10 KΩ ± 1%
Cable
24AWG, 2 core UL-2464
Power dissipation
2mW/°C
Response time
30 seconds max.
Breakdown strength
2.5 KV
Insulation resistance
100 MΩ at 500V DC
Cable length
6 m (20 ft)
Operating / storage
Temperature
-10°C to + 85°C
NTC Resistance at 25°C
10 KΩ ± 1%
Cable
24AWG, 2 core UL-2464
Power dissipation
2mW/°C
Response time
30 seconds max.
Breakdown strength
2.5 KV
Insulation resistance
100 MΩ at 500V DC
Cable length
6 m (20 ft)
Specification
s
Specification
s
Note
When connecting 12V batteries, the SRTS-6M can be connected to any terminal of
the battery bank. When connecting two 12V batteries in series for a 24V system, the
SRTS-6M must be connected to any of the intermediate terminals instead of the
positive or negative terminals of the battery bank. If multiple smaller voltage cells
are used to form the battery bank, connect the SRTS-6M to any of the intermediate
terminals for approximate battery temperature measurement. SRTS-6M terminals
are non-polarized.
Thermometer symbol ( ) illustrates the SRTS-6M connection terminals in
all products.

Note
When connecting 12V batteries, the SRTS-6M can be connected to any terminal of
the battery bank. When connecting two 12V batteries in series for a 24V system, the
SRTS-6M must be connected to any of the intermediate terminals instead of the
positive or negative terminals of the battery bank. If multiple smaller voltage cells
are used to form the battery bank, connect the SRTS-6M to any of the intermediate
terminals for approximate battery temperature measurement. SRTS-6M terminals
are non-polarized.
Thermometer symbol ( ) illustrates the SRTS-6M connection terminals in
all products.