SmartLine Medical SmartPack AIM-1003 User manual

AIM-1003 TABLE ASSEMBLY MANUAL
RELEASE DATE: 08/07/2022 VERSION: 3
1
SmartPack
HEIGHT ADJUSTABLE TABLE
BASE TABLE ASSEMBLY INSTRUCTIONS
3.0
IMPORTANT: READ WARNING AND INSTRUCTION MANUAL BEFORE ATTEMPTING ASSEMBLY

AIM-1003 TABLE ASSEMBLY MANUAL
RELEASE DATE: 08/07/2022 VERSION: 3
2
WARNING AND DISCLAIMER
IMPORTANT: READ THIS WARNING BEFORE ATTEMPTING ASSEMBLY
WARNING:This product contains laser-cut metal components that may have sharp edges. Please
take care when assembling these parts and wear light leather gloves, long sleeved shirt, long
trousers and closed footwear to protect your body against possible cuts.
DISCLAIMER:To the full extent permitted by law, Smartline Machinery Pty Ltd, its Related Bodies
Corporate, their officers and employees are not liable for any injuries sustained while assembling
or using this SmartPack Table.

AIM-1003 TABLE ASSEMBLY MANUAL
RELEASE DATE: 08/07/2022 VERSION: 3
3
PACKAGING CONTENTS
• One table package consisting of:
o 1xTable Top and Under Top Frame
o 2xBase Shelf Bar
o 2xLeg Attaching Plate
o Fixings
o Tools
o Assembly Instructions
• One leg package consisting of:
o 2xCastor Bars (with castors)
o 2xLifting legs
Table Top and Under Top Frame
Lifting Legs
Fixings
M6 x20 Socket head Cap Screw (x16)
M6 x 20 Screw SS CSK Cap (x8)
M6 Nyloc Nut (x8)
M6 Flat Washer (x24)
Tools
5mm Allen Key
7/32” Allen Key
10mm L- Wrench
Base Shelf Bars
Leg Attaching Plates
Castor Bars (with castors)

AIM-1003 TABLE ASSEMBLY MANUAL
RELEASE DATE: 08/07/2022 VERSION: 3
4
ASSEMBLY INSTRUCTION
Follow each step listed below.
STEP 1
Remove protective film from leg attachment plates and fix to both lifting legs with M6 x20 SS CSK Cap screws.

AIM-1003 TABLE ASSEMBLY MANUAL
RELEASE DATE: 08/07/2022 VERSION: 3
5
STEP 2
Open packaging containing table top, leaving table top in pacakaging facing down (as shown in picture below) will help
to protect agaisnt and scraching of the table top surface during assembly. Attach legs to table with M6 Nyloc Nuts and
Washers, ensuring leg cable is orientated towards inside of table and connect to cables coming from control box in the
centre of the table.

AIM-1003 TABLE ASSEMBLY MANUAL
RELEASE DATE: 08/07/2022 VERSION: 3
6
STEP 3
Attach both base shelf bar in correct orientation to suit undershelf unit or not to caster bar #1, loosely fix in position.
Attach other caster bar to base shelf bars and loosely fix in position.

AIM-1003 TABLE ASSEMBLY MANUAL
RELEASE DATE: 08/07/2022 VERSION: 3
7
STEP 4
Lower the base frame assembly onto the lifting legs –Recommend 2people for this task.
CAUTION –Keep hands &fingers clear of the lifting leg openings in the caster bars while fitting
base frame -Pinch Point.
Fit washers and screws through caster bar into lift legs and tighten. Also, tighten base shelf bar screws.

AIM-1003 TABLE ASSEMBLY MANUAL
RELEASE DATE: 08/07/2022 VERSION: 3
8
STEP 5
Turn table over onto castors to stand upright. Recommend 2people for this task.
Lock castors, plug in 240V electrical plug, hold down button on control panel for 3seconds then press up button to lift
table top to ensure table is functioning.
Your Smartpack table is ready for use or the fitment of any other Smartline accessories you have purchased.

AIM-1003 TABLE ASSEMBLY MANUAL
RELEASE DATE: 08/07/2022 VERSION: 3
9
ASSEMBLY COMPLETED
CONTACT DETAILS
If you require any further information, please contact:
Smartline Medical
[phone]
[email protected]m
www.smartlinemedical.com