SmartRoom ZigBee SR-IES-01 User manual

SmartRoom
IPAD Wall Base (iPad2)
You can read software instruction to
get more information.
Quickly Guide

© Nanjing IOT Sensor Technology Co.,Ltd. 2013
Publication Number：2013-0627.1
The manual is issued by Nanjing IOT Sensor Technology Co., Ltd. It is without warranty.
We reserve the right to change and modify misprinted and incorrect information and improve
programs or devices at any time without notice. Such modifications will be written in the
new- edition of the manual.
The reproductions of the content of the manual, in whole or in part, are strictly prohibited
without the written consent from Nanjing IOT Sensor Technology Co., Ltd. The using of the
content in other computers capable of reproducing and retrieving and reverse engineering
are also forbidden.
Copyright

SmartRoom, IOT Sensor, Wulian are all the registered trademarks of Nanjing IOT Sensor
Technology Co., Ltd.
Usage of these trademarks is strictly prohibited without the written authorization and
permission from Nanjing IOT Sensor Technology Co., Ltd. Legal action will be taken against
unauthorized use of these trademarks.
All other products mentioned in the manual or service name is the trademark or registered
trademark of the respective companies.
Trademark

● Support ZigBee/SmartRoom protocol.
● The installation is very convenient, and it can merge into household decoration.
● Brand new appearance design, more suitable for home life.
● Wireless layout, more convenient for the charging of iPad.
Basic Function
1

Function Diagrams
2
iPad Place Area
iPad Charging Socket
Tamper Protection Switch
Multi-function Key
Decorative Cover

3
Self-locking Shackle
Function Diagrams
Power Interface

1. According to the chart, connect to 220V power lines.
Installation
4
Power Interface

2.Tighten the self-locking shackle with the screw, then fix the base in the wall.
5
Self Locking Shackle
Installation Steps

3.Attach the Decorative Cover. Installation is completed.
6
Wall
Installation Steps

7
4.Press iPad place area lightly, after it pops out, and then put the iPad in the place area.
Press iPad place area again, and then the place area returns to the original position.
Press iPad place
area lightly
Installation Steps

1.Please make sure the Gateway (additional purchase) ZigBee network is working with
power within effective communication distance of gateway before configuring the wall
switch.
Attention: For more details please refer to wireless gateway instruction.
Networking Setting
8

2. Press Multi-functional key 4 times quickly to join ZigBee network.
9
Click the multi-functional key 4
times quickly to join the ZigBee
network successfully and then
the buzzer gives out a long ring
for 2 seconds and stops.
Network Setting

3. Long pressing the multi-function button for 10 seconds, restore to factory settings and
exit the ZigBee network at the same time.
10
Long pressing the multi-function
button for 10 seconds, if the buzzer
rings 4 times, the device will exit the
ZigBee network successfully.
Network Setting

1. 1.This product has the unique anti-theft design. When the iPad is placed in or removed
away from the base, users can receive the warning messages in mobile terminals in case
of iPad has been stolen, so users will feel more safer and comfortable.
How To Use
2. This product can make iPad into a wall touch screen, because iPad can easily be set on
the base and fixed on the wall. Just a press on the button, iPad can be take out from the
base quickly. As a wireless touch screen, it can charge the iPad meanwhile.
11

Product Specifications
Power Requirement
Working Temperature
Wall Required Size
Weight
Net weight
12
220V
-10℃~+55℃
281*228*60.5mm
1800g
1700g

13
Name of Order
Part No.
Article No.
iPad Wall Base （iPad 2）
SR-IES-01
WLPN1402310
Ordering Information

B11 Software Valley, NO.15, Fengji Avenue, Yuhuatai District, NanJing
Service hotline ：[phone]
www.wulian.cc/english/