Panasonic TY-27SF24M User manual

Panasonic o
Assembly
Instructions
TY-27SF24M
VIDEO STAND
Important
A study of the assembly instructionswill not only save you
time but may prevent possible damage to your new stand.
Assistance may be required for some assembly procedures.
CAUTION:THIS STANDSHOULD BEUSEDWITH CASTERS.
IT IS ALSO DESIGNEDFORUSEWITH
PANASONICTELEVISIONRECEIVERS.
UL APPROVED MODELS: CT-27SF12T, CT-27SF14V,
CT-27SF24V, CT-27SF34V
Your Pack Contains:
Video Stand A
!
HingeMetal Plate E
screw
K.j _c_._cs.
ag TKC2Q25129
TOLLFREECUSTOMERASSISTANCELINE
1.800.900.MICA (6422)
l Screw #8 x 5/8" B
16 Pcs. THT2QOFB76B
Pin O
() )
2 Pcs. TKC2025094
Caster _ C
1 Bag
4 Pcs. TBL2OA4105
To01Required:
TouchPlate G
GlassDoor F
'y/j
1 Pc. TKG2Q59481 1Pc. TKC2025082 _Phllps Screwdriver

STEP 1
|
Important:
To prevent the shelf from falling out when
installing the casters, it is important to keep
the "shelf shipping protector" intact before
turning the unit upside down.
•Lay the top of the stand on a soft surface
(carpet) to avoid any damage to the unit.
•Install casters (_) to pre-drilled holes
as shown, using screws (_.
STEP2
•Turn the TV stand back to
the upright position.
•Remove shelf shipping
protectors. J

STEP 3Glass Door Installation
®
<:_::=TOUCH
+@ PLATE
®
/
@
3-1 •Apply hinge metal plates (_ to the glass door (D on the
inside curvature of the glass as shown.
3-2 °Slide the glass door _ into the top and bottom hinges.
3-3 °Tighten the screws to fit against the hinge metal plates (_).
3-4 •Remove protective liner from rubber pad and fold over door as shown.
Slide touch plate (_) over rubber pad.
Note: The glass door can be levelled by loosening the hinge metal screws (_.
J

f
STEP 4
Insert pins (_ as shown.
Placetelevision set on the
stand making surethe holes
on the bottom of thetelevision
line up with the pinson the stand.
Replacement Parts
GlassDoor
j/z
TKG2059481
Door Hinge
TKC2Q25077-2
Screw with Washer
#6 x 5/8 in.
THT2Q3JBgSB
RearCover
TKD2017376-1
HingeMetal Plate
Screw
TKC2Q25129
Screw #6 x 5/8 in.
THT2Q07B99B
Shelf
TKD2013365
TouchPlate
TKC2Q25082
Screw #6 x 3/4 in.
THT2QOKC128B
Shelf Pin
Pin TKC2Q25036
() )
TKC2025094
Screw #8 x 5/8 in.
THT2QOFB76B
Caster
TBL2QA4105i
MagneticLatch
TKC2Q25080
Screw #8 x1-15/16 in.
TKC2Q25069-1
For Painted Surfaces:
Vinyl:
•Scuff Marks:
•Stains:
To maintainappearance we recommendthe following:
Usea dampclothfor cleaning.Do not useany abrasiveor chemicalbased cleaners.
Vinyl does not need polishing and is remarkablyresistantto almost any stain.
Most scratches and scuffs can be removed with fine steel wooland furniture wax.
A sponge,dippedinwarm, soapywater and usedto wipe lightlyovervinyl willremovemoststains.
NOTE: As with all indoor furniture, this unit should not be exposed to direct sunlight, extreme temperatures or
moisture, as this can result in serious irreparable damage.
For improvement purposes, design and specifications are subject to change without notice.
t
When making a part(s) inquiry, please quote part number and description.
For parts inquiries or for out of warranty purchases:
PANASONIC "SERVICES COMPANY
20421 84th Avenue South, Kent, Washington 98032 • Tel.: [phone] •Fax: [phone]
,,,,,,,.©1997MatsushitaElectricIndustrialCo.,Ltd.
TQB2Q27SF24M
All rightsreserved.
Unauthorizedcopyingand distributionis aviolationof law.J
Printed in Canada