Smeg SI4641CB Quick start guide

EN GUIDE TO INSTALLATION AND USE
Cooking Hob

EN
2
TABLE OF CONTENTS
• Safety Guidelines ____________________________________________________ 03
• Environmental Protection _____________________________________________ 03
• Description of Your Appliance _________________________________________ 04
1 / INSTALLING YOUR APPLIANCE
• Proper positioning ___________________________________________________ 05
• Building in __________________________________________________________ 05
• Hook-up ___________________________________________________________ 06
2 / USING YOUR APPLIANCE
• Description of the top _________________________________________________ 07
• Cookware for induction _______________________________________________ 08
• Which cooking zone should you use based on your cookware? _____________ 08
• Description of control panel ___________________________________________ 09
• Powering on /Stop ___________________________________________________ 09
• Adjusting the power _________________________________________________ 09
• Adjusting the timer __________________________________________________ 09
• child safety use _____________________________________________________ 10
• Safety during operation _______________________________________________ 11
3 / DAILY CARE OF YOUR APPLIANCE
• Protecting your appliance _____________________________________________ 12
• Maintaining your appliance ____________________________________________ 12
4 / SPECIAL MESSAGES, DIFFICULTIES
• During initial use ____________________________________________________ 13
• When powering on ___________________________________________________ 13
• During operation ____________________________________________________ 13
5 / COOKING CHART
• Cooking chart for food types __________________________________________ 14
As part of our commitment to constantly improving our products, we reserve the right
to make changes to them based on technical advances to their technical and functio-
nal features and appearance.
Warning
Before installing and using your appliance, please carefully read this Guide to
Installation and Use, which will allow you to quickly familiarise yourself with its ope-
ration.

EN
3
This appliance's packaging material is recy-
clable. Help recycle it and protect the environ-
ment by dropping it off in the municipal recep-
tacles provided for this purpose.
Your appliance also contains a
great amount of recyclable mate-
rial. It is marked with this label to
indicate the used appliances that
should not be mixed with other
waste. This way, the appliance recy-
cling organised by your manufactu-
rer will be done under the best possible
conditions, in compliance with European
Directive 2002/96/EC on Waste Electrical and
Electronic Equipment. Contact your town hall
or your retailer for the used appliance collec-
tion points closest to your home.
We thank you doing your part to protect the
environment.
FFoorrAAuussttrraalliiaaoonnllyy::
- Young children should be supervised to ensure that they do not play with the appliance.
- The appliance is not intended for use by young children or infirm person without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid hazard.
- Do not install the product if you see any damage on it.
FFoorrSSeerrvviicceeiissssuueess,,pphhoonneennuummbbeerr::11330000555533772200,,ffaaxxnnuummbbeerr::11330000555533771199
SAFETY GUIDELINES
We have designed this cooking hob for use by
private persons in their homes.
These cooking hobs are meant to be used
exclusively for cooking beverages and foods-
tuffs and do not contain any asbestos-based
materials.
This appliance is not intended to be used by
persons (including children) with reduced phys-
ical, sensory or mental abilities, or persons
lacking experience or awareness, unless using
it with the help of a person reponsible for their
safety, or under supervision and with prior
instruction in its use. Children should be super-
vised to ensure that they do not play with the
appliance.
••
Residual heat
A cooking zone can remain hot for several
minutes after use.
An ""HH""is displayed during this period.
Avoid touching the hot areas during this time.
••
Child safety device
Your hob is equipped with a child safety
device that locks its operation after use or
during cooking (See " Child Safety use" sec-
tion).
Do not forget to unlock it before using the
hob again.
••
For users of pacemakers and
active implants
The functioning of the hob conforms to cur-
rent electromagnetic interference standards
and thus is in total compliance with legal
requirements (89/336/CEE directives).
In order to avoid interference between your
cooking hob and a pacemaker, your pacema-
ker must be designed and programmed in
compliance with the regulations that apply to
it.
Consequently, we can only guarantee that our
own product is compliant.
With regard to the compliance of the pacema-
ker or any potential incompatibility, you can
obtain information from the manufacturer or
your attending physician.
Electrical Danger
Ensure that the power cables of any
electrical appliances plugged in close to
the hob are not in contact with the cooking
zones.
If a crack appears in the glass worktop,
immediately disconnect your appliance to
avoid the risk of electric shock.
To do this, remove the fuses or use the cir-
cuit breaker.
Do not use your hob until you have repla-
ced the glass worktop.
••
ENVIRONMENTAL PROTECTION
••

EN
4
DESCRIPTION OF YOUR APPLIANCE
••
BCB
AAD
Air intake
Air outlet
Vitroceramic glass
Power cord
A
B
C
D

EN
5
11/ INSTALLING YOUR APPLIANCE
On 30, 38, 80 and 90 cm models, ensure that the
upper rail across the front of the cabinet does not
impede the air flow. If necessary, cut a chamfer.
••
CHOOSING THE POSITION
The distance between the edge of your appliance
and the side and rear walls (or partitions) must be
at least four centimetres (zone A).
YYoouurraapppplliiaanncceemmaayybbeebbuuiillttiinnwwiitthhoouuttaannyyrreessttrriicc--
ttiioonn..CChheecckk,,hhoowweevveerr,,tthhaatttthheeaaiirriinnttaakkeeaanndd
oouutt--
lleettaarreeffrreeeeooffoobbssttrruuccttiioonn((sseeee““ddeessccrriippttiioonnooff
yyoouurraapppplliiaannccee””cchhaapptteerr))..
The building-in method opposite is recommended
for use above an oven or a built-in appliance.
BUILDING-IN
Follow the diagram above.
Glue the foam seal underneath your appliance, fol-
lowing the perimeter of the hole in the worktop,
upon which your appliance will rest. This will
ensure a good seal against the worktop.
Attach the clips to the hob (depending on the
model ).
4 cm
4 cm
4 cm
Entrée d'air
Sortie d'air
4
cm
A
vveennttiillaattiioonnssppaaccee
5511
••
5588
4499
66,,44
AAbboovveeaannoovveenn
MIN 4 mm
AAbboovveeaaccaabbiinneett
wwiitthhaaddoooorroorrddrraawweerr
Tip
If your hob is located above your oven, the hob’s thermal safety devices can impede the
simultaneous use of the hob and the oven’s pyrolysis program.
Your hob is equipped with an anti-overheating safety system.
This safety device can trigger, for example, when the hob is installed over an oven that is not suf-
ficiently insulated. If this occurs, a series of small lines appears on the control panel. In such cir-
cumstances we recommend that you increase the hob’s ventilation by creating an opening in the
side of the cabinet, (8 x 5 cm), and/or installing an oven insulation kit available from the after-sales
department.
Air outlet
Air intake
5566

EN
6
11/ INSTALLING YOUR APPLIANCE
Separate the two phase wires (L1 and L2)
before hooking up.
NNeeuuttrraall
EEaarrtthh
PPhhaassee
NNLL
Green/yellow
Blue
Black-grey
NNeeuuttrraallEEaarrtthh
PPhhaassee
NNLL11LL22
Blue
Green/yellow
Black-grey
• 220-240 V monophase hook-up
~
-
Warning
If the power cable is damaged, it
should be replaced by the manufacturer, its
after-sales service department or by a per-
son with similar qualifications to avoid dan-
ger.
For a 400 V 2N triphase hook-up, if your hob
malfunctions, check that the neutral conduc-
tor is properly connected.
These hobs must be connected to the power
grid via an electrical outlet that complies with
EIC publication 60083 or an all-pole cut-off
device that complies with installation regula-
tions in effect.
Your appliance should be positioned so that
the mains plug is accessible.
When power is first supplied to your hob, or
after an extended power outage, an indicator
light will appear on the control panel. It auto-
matically disappears after approximately 30
seconds, or as soon as any touch control on
the control panel is pressed. This display is
normal and, if needed, serves as an indication
to the after-sales service staff. In all cases,
the user of the hob should disregard it.
HOOK-UP
••
• hook-up 400V 2N
~ -
16A
32A

EN
7
22/ USING YOUR APPLIANCE
DESCRIPTION OF THE TOP
••
00295
1166ccmm
50 W - 2200 W
2288ccmm
50 W - 36600 W
1188ccmm
50 W - 2800 W
SI 4631
00360
1166ccmm
50 W - 2200 W
2288ccmm
50 W - 36600 W
1188ccmm
50 W - 2800 W
SI 4631CBS
00368
SI 4641
1166ccmm
50 W - 2200 W
1188ccmm
50 W - 2800 W
2211ccmm
50 W - 31100 W
1188ccmm
50 W - 2800 W

EN
8
22/ USING YOUR APPLIANCE
Tip
To check the suitability of your cook-
ware:
Place the vessel on a cooking zone at
power level 4.
If the display remains on, your cookware is
compatible.
If the display flashes, your cookware cannot
be used with induction cooking.
You can also use a magnet to test the cook-
ware.
If a magnet "sticks" to the bottom of the
cookware, it is compatible with induction.
••
WHICH COOKING ZONE
SHOULD YOU USE BASED ON
YOUR COOKWARE?
••
COOKWARE FOR INDUCTION
••
The induction principle
The principle of induction is based on a
magnetic phenomenon.
When you place your cookware on a cooking
zone and you turn it on, the electronic boards
in your cooking hob produce "induced" cur-
rents in the bottom of the cookware and ins-
tantly raise its température. This heat is then
transferred to the food, which is simmered or
seared depending on your settings.
••
Cookware
Most cookware is compatible with induction.
Only glass, terra cotta, aluminium without a
special finish on the bottom, copper and
some non-magnetic stainless steels do not
work with induction cooking.
We recommend that you select cookware
with a thick, flat bottom. The heat will be dis-
tributed better and cooking will be more uni-
form.
+
-
C
B
A
Inductor
Electronic board
Induced electric current
A
B
C
Cooking Cookware to use
zone *
1166ccmm1100..........1188ccmm
1188ccmm1122..........2222ccmm
2211ccmm1188..........2244ccmm
2233ccmm1122............2266ccmm
2288ccmm1122..........3322c
cmm
* (depending on the model )

EN
9
22/ USING YOUR APPLIANCE
SETTING THE TIMER
There is a rotating timer for each cooking
zone. The 4 timers can be used together.
By pressing the button repeatedly you can
select the cooking zone to which you wish to
apply the timer.
The timer leds can only be set for zones that
are in operation. The led of the timer being
displayed will be highlighted.
To use the timer:
- Switch on the cooking zone and adjust the
power level.
- Select the timer led of the cooking zone.
- Slide your finger on the circular part until you
have the desired setting for your cooking
time. For long times, turn the dial anti-clock-
wise to get to 99 minutes more quickly.
The timer starts counting only if the cooking
zone is covered with an item of cookware.
When the cooking is finished the zone swit-
ches off, the timer indicates 00, and you are
notified by a ssoouunnddssiiggnnaall.
- Press any button to stop the beeping.
To change the timer settings:
- Select your timer
- Turn it towards the + or the - on the circular
part.
To stop the timer:
- Select your timer
- Hold down the button .
To access the timer directly:
- Press the button and the setting is made
in 10-minute increments.
OPERATION
Press the start/stop button for the cooking
zone you want to use. A flashing 00display
and a beep indicates that the cooking zone is
on. A fixed dot appears in the selected dis-
play. You can now choose the desired power
level.
If you do not select a power level, the cooking
zone will automatically switch off.
STOP
Hold down the start/stop button for the coo-
king zone used.
ADJUSTING THE POWER LEVEL
Slide your finger on the control in a clockwise
direction to increase your power level from 1
to P (maximum power) and in the anti-clock-
wise to reduce it
Direct access to power: press the central part
: 1press ->PP, 2 presses ->66, 3 presses ->
33,,and 4 presses—>PP..
When it is switched on you can move directly
to maximum power “P” by pressing the “--”
button.
••
••
DESCRIPTION OF THE
CONTROLS
••
Start/stop buttons.
Timer / power setting.
Timer button.
••
A
B
C
••
Tip
You can
adjust the the
power setting and
timer 1 by 1 with
each press on the
right or left part of
the circular part.
CAB
++11
--11

EN
10
22/ USING YOUR APPLIANCE
CHILD SAFETY” USE
Your hob has a child safety
device which locks the controls
when the hob is not in use (when
cleaning for example) or when it
is being used for cooking (to
maintain your settings). Due to safety reasons,
only the “stop” control is always active. It
authorises a heating zone to be switched off
even when the hob is locked.
••How do you lock your hob?
Maintain pressure on the lock key until the led
on top lights up and a beep confirms your
maneouver.
••Hob locked when in operation
The display of cooking zones in operation
alternately indicates power and the locking
symbol .
When you press the ppoowweerror ttiimmeerrcontrols
for the zones in operation, the lock led lights
up. It will switch off after a few seconds.
Only the “stop” control remains on at all times.
For cooking zones that are not in operation,
the symbol and the led light up when you
press the “ssttaarrtt//ssttoopp” controls
This display will switch off after a few
seconds.
••The hob is locked when switched
off
The led above the lock key is switched off.
Press this control briefly to switch on the led.
The led displays when you press the ssttaarrtt//
ssttooppkey in any zone.
••How do you unlock your hob?
Press the lock control until the led switches off
and a double beep confirms your maneouver.
Tip
Remember to unlock your hob
before using it again (see chapter on
“child safety use”).
••
CLEAN LOCK
This function allows you to temporarily lock
your hob while cleaning.
To activate Clean lock:
- Your cooking hob must be turned on or off.
- Briefly press touchpad . A beep sounds
and an indicator appears.
- After a predefined time, the lock will auto-
matically disengage. A beep sounds and the
indicator goes out.
- You can stop the Clean lock by holding down
the button .
••

EN
11
22/ USING YOUR APPLIANCE
SAFETY DURING OPERATION
•Residual heat
After intensive use, the cooking zone that you
have just used can remain hot for several min-
utes.
An ""HH""is displayed during this period.
Avoid touching the hot areas during this time.
•Temperature limiter
Each cooking zone is equipped with a safety
sensor that constantly monitors the tempera-
ture of the bottom of the cookware. In the
event that an empty vessel is left on a cooking
zone that is on, this sensor automatically
adjusts the power output of the hob, thereby
avoiding any risk of damage to the cookware
or the hob.
•"Small Items" safety
A small object (such as a fork, a spoon, a ring,
etc.) left alone on the hob is not detected as a
piece of cookware.
The display flashes and no heat is produced.
Warning
It is recommended that you avoid
placing metal objects such as knives, forks,
spoons and lids on the cooking surface, as
they may become hot.
•Protection against overflows
The hob may shut down (with
the adjacent symbol in the
display) automatically in any
of these three situations:
--Overflow that spills onto the touch controls.
- Damp towel placed over the touch controls.
- Metallic object placed on the touch con-
trols.
Clean the hob or remove the object, then
begin cooking again.
•Auto-Stop system
If you forget to switch off a cooking zone,
your hob has an "AAuuttoo--SSttooppssyysstteemm" safety
function which automaticallty cuts off the
power to the cooking zone, after a predefined
period (between 1 and 10 hours depending
on the power used).
If this safety system is used, the cutoff to the
cooking zone is displayed as "AASS" or "AA" on
the control panel and a "bip" sounds for about
2 minutes. Simply press any of the control
buttons to stop this.
A double bip will confirm your action.
••
BIP..BIP

EN
12
33/ DAILY CARE OF YOUR APPLIANCE
PROTECTING YOUR APPLIANCE
Avoid hard shocks from cookware:
The vitroceramic glass worktop is very sturdy;
however, it is not unbreakable.
Do not place any hot lids flat on your cooking
hob. A suction effect may damage the vitroce-
ramic surface.
Avoid dragging cookware across the surface,
which may in the long-term result in the
degradation of the decorative finish of the
vitroceramic top.
Avoid placing cookware on the frame or cover
(depending on the model).
Avoid using cookware with rough or bumpy
bottoms: they can capture and transfer parti-
cles that may produce stains or scratches on
your hob.
These defects that do not result in
appliance malfunction or do not make it
unsuitable for use are not covered by the
warranty.
MAINTAINING YOUR APPLIANCE
Do not store cleaning products or flammable
products in the cabinet underneath your coo-
king hob.
Do not heat unopened canned goods; they
may burst.
Of course, this precaution applies to all types
of cooking.
Never use a sheet of aluminium for cooking.
Never place items wrapped in aluminium foil
or packaged in aluminium dishes on your coo-
king hob.
The aluminium will melt and permanently
damage your cooking appliance.
Objects not intended for cooking should
never be placed on the hob (risk of powering
on, scratches, etc.).
Steam cleaning should never be used. The
steam jet could damage your hob.
TTYYPPEEOOFFSSTTAAIINNSS//SSPPOOTTSS
Light.
Accumulation of baked-
on soil.
Overflow of sugary pre-
parations, melted plastic.
Rings and hard water
residue.
Shiny metallic streaks.
Weekly maintenance.
WWHHAATTTTOODDOO
Thoroughly moisten the zone to be clea-
ned with hot water, then wipe off.
Thoroughly moisten the zone to be clea-
ned with hot water. Use a scraper for
glass to remove the large bits, follow with
the rough side of a disinfectant sponge,
and then wipe off.
Apply warm white vinegar to the stain, let
stand, then wipe with a soft cloth.
Apply a cleaning agent for vitroceramic
glass (preferable one with silicone for its
protective properties) to the surface.
UUSSEE
Disinfectant spon-
ges.
Disinfectant spon-
ges.
Scraper for glass.
White spirit vinegar.
Cleaning agent for
vitroceramic glass.
Cream
Special disinfectant sponge
for delicate dishes Scouring sponge
Powder
••
••

EN
13
44/ SPECIAL MESSAGES, DIFFICULTIES
Warning
In the event that there is a break, crack or opening--even minor--in the vitroceramic
glass, immediately disconnect your appliance to avoid the risk of electric shock.
Contact the After-Sales Service Department.
YOU OBSERVE THAT: POSSIBLE CAUSES: WHAT SHOULD YOU DO:
An indicator light appears.
Your installation blows a fuse.
Only one side works.
The hob produces an odour
during the first cooking ses-
sions.
Working normally.
The electrical hook-up of your
hob is incorrect.
New appliance.
Nothing.
Verify the connections.
See the "Hook-Up" sec-
tion.
Operate each cooking
zone for 30 minutes with a
saucepan full of water.
The hob stops working and it
emits a beep approximately
every 10 seconds and a or
"F7" is displayed.
A series of small or "F7" is
displayed.
After turning on a heating zone,
the indicator lights on the
control panel continue to flash.
The saucepans make noise
during cooking.
Your hob makes a clicking
sound during cooking.
The fan continues to function a
few minutes after your hob is
turned off.
There was an overflow or an
object is in contact with the
control panel.
The electronic boards heated
up.
The cookware used is not sui-
table for induction or is less
than 12 cm in diameter (10 cm
for the 16-cm cooking zone).
This is normal with some types
of cookware. This is caused by
the transfer of energy from the
hob to the cookware.
Cooling of the electronic com-
ponents.
Working normally.
Clean the hob or remove
the object, then begin
cooking again.
See "Built-In" section.
See section on cookware
for induction.
Nothing. There is no risk,
neither to your hob nor to
your cookware.
Nothing.
•During operation
•During initial use
YOU OBSERVE THAT: POSSIBLE CAUSES: WHAT SHOULD YOU DO:
The hob is not working and the
indicator lights on the control
panel are not on.
The table is not working and
another message is displayed.
The hob does not function, the
information
is displayed.
The appliance is not receiving
electricity. The electrical sup-
ply is defective or the hook-up
is incorrect.
The electronic board is func-
tioning poorly.
The hob is locked.
Inspect the electrical cir-
cuit breaker and fuses.
Call the After-Sales
Service Department.
See chapter on using the
child safety system.
•When powering on
YOU OBSERVE THAT: POSSIBLE CAUSES: WHAT SHOULD YOU DO:

EN
14 CZ5701195 /00 11/11
55/ COOKING CHART
COOKING CHART
••
BROTHS
THICK SOUPS
COURT BOUILLON
FROZEN FOODS
THICK, FLOUR-BASED
BUTTER-BASED WITH EGGS
(BEARNAISE, HOLLANDAISE)
PREPARED SAUCES
ENDIVES, SPINACH
DRIED BEANS
BOILED POTATOES
GOLDEN BROWN POTATOES
SAUTEED POTATOES
DEFROSTING VEGETABLES
MEAT, NOT TOO THICK
STEAKS, IN SKILLET
GRILLED MEATS (CAST IRON GRILL)
FROZEN FRENCH FRIES
FRESH FRENCH FRIES
PRESSURE COOKER
(ONCE IT STARTS WHISTLING)
COMPOTES
CRÊPES
CRÈME ANGLAISE
MELTED CHOCOLATE
JAMS
MILK
EGGS, FRIED
PASTA
JARS OF BABY FOOD
(DOUBLE BOILER)
MEAT STEW
SPANISH RICE
RICE PUDDING
FFRRYYCCOOOOKK//BBRROOWWNNCCOOOOKK//SSIIMMMMEERRKKEEEEPP
BRING TO RETURN TO BOILING WWAARRMM
A BOIL BOILING LIGHT BROTHS
SOUPS
FISH
SAUCE
VEGETABLES
MEAT
FRYING
MISCELLA-
NEOUS
PP998877665544332211
PP998877665544332211
PP998877665544332
211
FFaaggoorrBBrraannddttSSAASS,,MMaannaaggeemmeennttccoommppaannyy––SSAASS::ssoocciiaallccaappiittaallooff2200,,000000,,000000eeuurroossRRCCSSNNaanntteerrrree444400330033119966..