smev 7003 Guide

FRANÇAIS
NEDERLANDS
DEUTSCH
NORSK
SLOVENSKI
SVENSKA
SUOMI
DANSK
ITALIANO
ENGLISH
ESPAÑOL
INSTALLATION / USAGE / ENTRETIEN - FR
INSTALLATIE / GEBRUIK / ONDERHOUD - NL
INSTALLATION / GEBRAUCH / WARTUNG - DE
ASENNUS / KÄYTTÖ / HUOLTO - FI
INSTALLATION / ANVÄNDNING / UNDERHÅLL - SE
INSTALLASJON / BRUK / VEDLIKEHOLD - NO
INSTALACIJA / UPORABA / VZDRŽEVANJE - SI
INSTALLATION / USE / MAINTENANCE - GB
INSTALLAZIONE / USO / MANUTENZIONE - IT
INSTALLATION / BRUG / VEDLIGEHOLDELSE - DK
INSTALACIÓN / USO / MANUTENCIÓN - ES
INSTALAÇÃO / UTILIZAÇÃO / MANUTENÇÃO - PT
PORTUGUÊS
7003 - 7023 - 7103 - 7123 - 8103VD - 8103VDM - 8123VD - 8123VDM
8203 - 8203 M - 8223 - 8223 M - MO8302 - MO8303 - MO8322 - MO8323
MO8342 - MO8362 - MO8801D - MO8801S - MO8821D - MO8821S
MO9122 - MO9202D - MO9202S - MO9222D - MO9222S - PI7203 - PI7223 - PI7703
PI7723 - PI8002 - PI8003 - PI8022 - PI8023 - PI8042 - PI8043 - PI8062 - PI8063
PI8403 - PI8423 - PI8443 - PI8463 - PI8502 - PI8503 - PI8522 - PI8523 - PI8542
PI8543 - PI8562 - PI8563 - PI8621A - PI8621R - PI8621S - PI8802D - PI8802S
PI8822D - PI8822S - PI8842D - PI8842S - PI8862D - PI8862S - PI9003 - PI9023

12
ENGLISH
SYMBOLS
WARNINGS AND SAFETY SYMBOLS
The safety symbols utilised identify possible hazards to users.
Always respect all safety warnings identified with these symbols:
INDEX
INSTALLATION 13
SAFETY WARNINGS 13
CABINET APERTURE 13
CONNECTING TO GAS SUPPLY 14
WIRING- CONNECTING TO ELECTRICITY SUPPLY 15
FIXTURE 15
USE 16
WARNINGS 16
CONTROLS 16
BURNERS: 17
HOB: 18
SELECTING BURNER 18
ELECTRONIC IGNITION HOB (DEPENDING ON MODEL) 18
MANUAL IGNITION HOB 18
HOB FLAME REGULATION 18
VISUAL FLAME CONTROL 19
GAS CYLINDERS / BOTTLES 19
MAINTENANCE 20
CLEANING 20
INJECTORS 20
SMEV ACCESSORIES 20
TEST PRESSURE POINT10
FIGURES AND TECHNICAL DRAWINGS 122-135
WARNING
Hazard of injury or death. CAUTION To prevent possible injury
and / or damage

INSTALLATIONUSE
MAINTENANCE
13 ENGLISH
SAFETY WARNINGS
THIS APPLIANCE MUST BE INSTALLED IN ACCORDANCE WITH THE
REGULATIONS IN FORCE AND ONLY USED IN AN ADEQUATELYVENTILATED
AREA. ALWAYS READTHE INSTRUCTIONS PROVIDEDTHOROUGHLY BEFORE
INSTALLING AND USINGTHIS APPLIANCE.
THIS APPLIANCE MUST BE INSTALLED BY SPECIALISED GAS SERVICE ENGINEERS.
THIS APPLIANCE IS DESIGNED AND MANUFACTURED FOR COOKING FOOD
ONLY.ANY OTHER USE IS CONSIDERED IMPROPER AND INCORRECT CREATING
HAZARDOUS CONDITIONS.THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR DAMAGETOTHINGS OR INJURIESTO PERSONS CAUSED BY INCORRECT
INSTALLATION AND / OR INCORRECT AND IMPROPER USE.
BEFORE INSTALLING CHECK THATTHE LOCAL GAS AVAILABLE (GASTYPE AND
PRESSURE) ANDTHE APPLIANCE REGULATORS ARE COMPATIBLE WITHTHE
APPLIANCE ITSELF.
GAS REGULATING SPECIFICATIONS FORTHIS APPLIANCE ARE PROVIDED ON THE
LABEL AFFIXED TOTHE APPLIANCE (OR ONTHE SERIAL PLATE).
THIS APPLIANCE IS NOT CONNECTEDTO A FUME EXTRACTION FLUE FOR
EXTRACTING PRODUCTS OF COMBUSTIONTHEREFORE IT MUST BE INSTALLED
AND CONNECTED (FITTED) CONFORMINGTO INSTALLATION REGULATIONS
IN FORCE FOR APPLIANCES OF THISTYPE. IT IS OF UTMOST IMPORTANCETO
RESPECT LEGISLATION REGARDING VENTILATION.
THE APPLIANCE MUST FITTED AT AN APPROPRIATE AND SAFE DISTANCE FROM
FLAMMABLE MATERIALS.
CABINET APERTURE
This hob has a class 3 grading: BUILT-IN APPLIANCE FOR KITCHENS OR WORKTOPS
MINIMUM ALLOWABLE DISTANCES FROMWALLS (FIG. 1 - PG. 122):
A / B FROM THE OUTER EDGE OF THE BURNER HEAD NEAREST ONE OF THE SIDE WALLS AND / OR
REAR WALL:
135 mm
CTHE DISTANCE BETWEEN THE TOP OF THE BURNER AND THE BOTTOM OF THE UNITS AND /
OR SHELVES FITTED ABOVE THE HOB:
500 mm
DTHE DISTANCE BETWEEN THE BOTTOM OF THE BURNER AND THE UNDERSIDE:
30 mm
SIZE OF CABINET APERTURE
Cut-out a hole in the cabinet as illustrated in FIG. 2 - PG. 123 depending on model to install.
The cabinet must be appropriately constructed and aligned horizontally with the worktop and with the unit.
The cabinet aperture must be perfectly squared and aligned.
If there are apertures for cabinet ventilation, prevent flammable materials from entering these.
Models PI8621A, PI8621S and PI8621R are modular.
It is possible to connect from 1 to 5 appliances in series.
ALWAYS RESPECT THE DISTANCE BETWEEN ONE CABINET APERTURE AND ANOTHER (FIG. 2 – PG. 130).

INSTALLATION
USE
MAINTENANCE
14
ENGLISH
CATEGORY AND COUNTRY OF DESTINATION
I3B/P(30)
AT BE DK FI DE GB NL NO SE CH SI
I3+ (28-30/37)
BE FR IE IT ES CH GB PT SI
GAS PRESSURE
30 mbar Butane (G30)
30 mbar Propane (G31)
28-30 mbar Butane (G30)
37 mbar Propane (G31)
This appliance is designed for running off the following types of gas at the corresponding operating pressures.The gas
category (or categories) of the appliance is given on the specifications label affixed to the appliance.
CONNECTING TO GAS SUPPLY
CHECKTHESE SPECIFICATIONS BEFORE CONNECTINGTHE APPLIANCETOTHE
GAS CYLINDER /BOTTLE.THE PRESSURE REGULATORS CONNECTED BETWEEN
THE GAS CYLINDER AND APPLIANCE MUST CONFORM WITHTHE CATEGORIES
GIVEN INTHETABLE BELOW.
MODEL TOTAL NOMINAL THERMAL
CAPACITY AIRVOLUME REQUIRED FOR
COMBUSTION
MO8801D - MO8801S - MO8821D
MO8821S - PI8621A
PI8621S
PI8621R
MO8302 - MO8322 - MO8342
MO8362 - MO9202D - MO9202S
MO9222D - MO9222S
PI8002 - PI8022 - PI8042 - PI8062
PI8502 - PI8522 - PI8542 - PI8562
PI8802D - PI8802S - PI8822D - PI8822S
PI8842D - PI8842S - PI8862D - PI8862S
MO9122
7003 - 7023 - 7103 - 7123
8103VD - 8103VDM
8123VD - 8123VDM
8203 - 8203 M - 8223 - 8223 M
MO8303 - MO8323 - PI9003 - PI9023
PI7203 - PI7223 - PI7703 - PI7723
PI8003 - PI8023 - PI8043 - PI8063
PI8403 - PI8423 - PI8443 - PI8463
PI8503 - PI8523 - PI8543 - PI8563
kW - gr/h m3/h
1,0 - 73
1,8 - 131
2,2 - 160
2,8 - 204
3,2 - 233
3,6 - 262
3,8 - 277
4,6 - 335
2,0
3,6
4,4
5,6
6,4
7,2
7,6
9,2

INSTALLATIONUSE
MAINTENANCE
15 ENGLISH
FIXTURE
THIS APPLIANCE MUST BE FITTED AND SECURED TO THE CABINET UTILISING THE FIXTURE SCREWS AS
ILLUSTRATED IN FIG. 3 - PG.131.
The gas supply pipe connected to the appliance must be a rigid metal pipe with sealed fittings. It is possible to fit
a flexible hose, however, in this case the following conditions must be respected:
a) The hose can be accessed easily for inspection;
b) The hose must be protected against coming into contact with parts which heat up (for example parts
underneath the burners);
c) The hose must be protected against being damaged (twisting, pulling, trapping,….);
d) The hose must be protected against being trapped by moving parts (e.g. drawers);
e) The hose must not have a length over 1.5 m;
f) The hose must be replaced before its expiry date;
For models PI8621A, PI8621S, PI8621R seal the appliance gas pipe utilising the sealed tube with pre-mounted
gas fitting provided. Once the appliance has been connected to the gas supply check for gas leaks utilising a non-
corrosive fluid. Do not use a water and soap solution. NEVER USE A FLAME TOTEST FOR GAS LEAKS
Models PI8621A, PI8621S and PI8621R are modular. It is possible to connect from 1 to 5 appliances in series.
Disconnect and remove the sealed tube mounted to the gas pipe on the installed appliance and connect it to the
gas pipe on the appliance to install. Connect the appliances together by connecting the gas pipes in series utilising
the fitting.
CONNECTING TO ELECTRICITY SUPPLY
THIS APPLIANCE MUST BE CONNECTED TO A 12VDC POWER PACK ONLY.THE
CIRCUIT MUST BE FITTED WITH A SAFETY FUSE NOT HIGHERTHAN 3 AMP.
WHEN WIRING RESPECT CORRECT POLARITY!
IT IS OF UTMOST IMPORTANCE NEVERTO CONNECTTHIS APPLIANCETO MAINS
VOLTAGE (230V) WHICH IRREVERSIBLY DAMAGES APPLIANCE COMPONENTS AND
CREATES A HAZARDTOTHE USER.
To connect the appliance use a 1.5 mm2double red and black wire and wire to the terminal junction box located at the
rear of the appliance.The red terminal is the positive pole and the black terminal is the negative pole.
This chapter refers only to models with the wording 12VDC on the appliance specifications label affixed to the
appliance.
WHEN INSTALLING AND CONNECTINGTHE APPLIANCE TOTHE GAS SUPPLY,
ENSURETHATTHE GAS SUPPLY HOSE IS NOTTWISTED, STRETCHED OR
SUBJECTEDTO ANY FORM OF STRAIN WHICH COULD CREATE A HAZARD.

INSTALLATION
USE
MAINTENANCE
GRILL
LIGHT
OFF
250-350-450
WITH THE EXCEPTION OF MODEL CU402 WHEN USING THE Broiler THE DOOR MUST
BE KEPT OPEN AND WITH THE HEAT GUARD FULLY EXTRACTED. (FIG. xx - PG. xx)
EXCEPTE POUR LE MODELE CU402, PENDANT LE FONCTIONNEMENT DU GRIL, LA
PORTE DOIT RESTER COMPLETEMENT OUVERTE ET LA PLAQUE DE PROTECTION
CONTRE LA CHALEUR COMPLETEMENT SORTIE. (FIG. XX - PAGE XX)
GRILL
LIGHT
OFF
250-350-450
WITH THE EXCEPTION OF MODEL CU402 WHEN USING THE Broiler THE DOOR MUST
BE KEPT OPEN AND WITH THE HEAT GUARD FULLY EXTRACTED. (FIG. xx - PG. xx)
EXCEPTE POUR LE MODELE CU402, PENDANT LE FONCTIONNEMENT DU GRIL, LA
PORTE DOIT RESTER COMPLETEMENT OUVERTE ET LA PLAQUE DE PROTECTION
CONTRE LA CHALEUR COMPLETEMENT SORTIE. (FIG. XX - PAGE XX)
GRILL
LIGHT
OFF
250-350-450
WITH THE EXCEPTION OF MODEL CU402 WHEN USING THE Broiler THE DOOR MUST
BE KEPT OPEN AND WITH THE HEAT GUARD FULLY EXTRACTED. (FIG. xx - PG. xx)
EXCEPTE POUR LE MODELE CU402, PENDANT LE FONCTIONNEMENT DU GRIL, LA
PORTE DOIT RESTER COMPLETEMENT OUVERTE ET LA PLAQUE DE PROTECTION
CONTRE LA CHALEUR COMPLETEMENT SORTIE. (FIG. XX - PAGE XX)
16
ENGLISH
WARNINGS
THIS APPLIANCE MUST ONLY BE USED BY RESPONSIBLE ADULTS. DURING USE
AND IMMEDIATELY AFTER USETHE BURNER AND OTHER ACCESSIBLE PARTS MAY
BE HOT; DO NOTTOUCHTHESE PARTS AND ALWAYS KEEP CHILDREN AT A SAFE
DISTANCE.AFTER USINGTHE APPLIANCE ENSURETHE KNOB/KNOBS ARE OFF.
AFTER USE ALWAYS SHUT OFFTHE GAS SUPPLY AT THE MAIN GASTAP.
THE USE OF GAS APPLIANCES GENERATES HEAT AND MOISTURE INTHE
IMMEDIATE AREA.ALWAYS ENSURE A GOOD VENTILATION INTHE COOKING
AREA: KEEP ALL AIRVENTS OPEN FOR NATURALVENTILATION OR INSTALL AN
EXTRACTOR FAN (COOKERHOOD).
DUETO INTENSIVE USE OFTHE APPLIANCE IT MAY BE NECESSARY TO INCREASE
VENTILATION SUCH AS OPENING A WINDOW OR INCREASING COOKERHOOD
(EXTRACTOR FAN) SPEED.
FOR MODELS MO8800THE DRAINER MUST BE REMOVEDWHEN UTILISINGTHE
HOB BURNER/S.
CAUTION:THIS WARNING IS AFFIXED INVISIBLE LOCATION ON THE HOB
GLASS LID. GLASS HOB LIDS MAY SHATTER WHEN HEATED. ALWAYS RAISE
THE LID BEFORE IGNITING A BURNER/S (HOB, OVEN AND GRILL) AND TURN OFF
ALL BURNERS (HOB, OVEN AND GRILL) AND LETTHEM COOL DOWN BEFORE
LOWERINGTHE HOB GLASS LID.
CAUTION:THIS WARNING REFERSTO MODELSWITH INCORPORATED SINK
UNIT AND HOB AND WITH GLASS LID DIVIDED BETWEEN SINK AND HOB.
THIS WARNING IS AFFIXED IN A VISIBLE POSITION ON THE SINK UNIT GLASS
LID.WHEN USINGTHE HOB WITHTHE GLASS LID ONTHE SINK UNIT CLOSED,
ALWAYS KEEP PANS ON HOB AT A DISTANCE OF 10 MM MINIMUM FROM SINK
UNIT GLASS LID.
The following symbols indicate the burner corresponding to the control knob.
NOTE: different models may have different knobs and different symbols.
THIS SYMBOL IS PLACED NEXT TO THE HOB BURNER KNOBS.
FULL DOT REFERSTOTHE CORRESPONDING HOB BURNER.
GAS OFF
HIGH FLAME
LOW FLAME
The following symbols indicate the burner regulation corresponding to the knob position.
NOTE: different models may have different knobs and different symbols.
OTHER SYMBOLS
PUSHBUTTON ELECTRONIC IGNITION
CONTROLS

INSTALLATIONUSE
MAINTENANCE
17 ENGLISH
BURNERS
Technical specifications for burners referring to appliance model:
7003 2 1 73 1 1,8 131
7023 2 1 73 1 1,8 131
7103 2 1 73 1 1,8 131
7123 2 1 73 1 1,8 131
8103VD 2 1 73 1 1,8 131
8103VDM 2 1 73 1 1,8 131
8123VD 2 1 73 1 1,8 131
8123VDM 2 1 73 1 1,8 131
8203 2 1 73 1 1,8 131
8203 M 2 1 73 1 1,8 131
8223 2 1 73 1 1,8 131
8223 M 2 1 73 1 1,8 131
MO8302 1 1 73 1 1,8 131
MO8303 2 1 73 1 1,8 131
MO8322 1 1 73 1 1,8 131
MO8323 2 1 73 1 1,8 131
MO8342 1 1 73 1 1,8 131
MO8362 1 1 73 1 1,8 131
MO8801D 1 1 73
MO8801S 1 1 73
MO8821D 1 1 73
MO8821S 1 1 73
MO9122 2 1,8 131
MO9202D 1 1 73 1 1,8 131
MO9202S 1 1 73 1 1,8 131
MO9222D 1 1 73 1 1,8 131
MO9222S 1 1 73 1 1,8 131
PI7203 1 1 73 2 1,8 131
PI7223 1 1 73 2 1,8 131
PI7703 1 1 73 2 1,8 131
PI7723 1 1 73 2 1,8 131
PI8002 1 1 73 1 1,8 131
PI8003 1 1 73 2 1,8 131
PI8022 1 1 73 1 1,8 131
PI8023 1 1 73 2 1,8 131
PI8042 1 1 73 1 1,8 131
PI8043 1 1 73 2 1,8 131
PI8062 1 1 73 1 1,8 131
PI8063 1 1 73 2 1,8 131
PI8403 1 1 73 2 1,8 131
PI8423 1 1 73 2 1,8 131
PI8443 1 1 73 2 1,8 131
PI8463 1 1 73 2 1,8 131
PI8502 1 1 73 1 1,8 131
PI8503 1 1 73 2 1,8 131
PI8522 1 1 73 1 1,8 131
PI8523 1 1 73 2 1,8 131
PI8542 1 1 73 1 1,8 131
PI8543 1 1 73 2 1,8 131
PI8562 1 1 73 1 1,8 131
PI8563 1 1 73 2 1,8 131
PI8621A 1 1 73
PI8621R 1 2,2 160
PI8621S 1 1,8 131
PI8802D 1 1 73 1 2,2 160
PI8802S 1 1 73 1 2,2 160
PI8822D 1 1 73 1 2,2 160
PI8822S 1 1 73 1 2,2 160
PI8842D 1 1 73 1 2,2 160
PI8842S 1 1 73 1 2,2 160
PI8862D 1 1 73 1 2,2 160
PI8862S 1 1 73 1 2,2 160
PI9003 2 1 73 1 1,8 131
PI9023 2 1 73 1 1,8 131
THERMAL CAPACITY BURNERSMODEL
SEMI-RAPID
Ø 62 mm
AUXILIARY
Ø 47 mm RAPID Ø 77 mm
nr. Kw gr/h nr. Kw gr/h nr. Kw gr/h

INSTALLATION
USE
MAINTENANCE
AUXILIARY
Ø 47 mm from 6 to 16 cm
SEMI-RAPID
Ø 62 mm from 16 to 22 cm
RAPID
Ø 77 mm from 16 to 22 cm
BURNER PAN DIAMETER
18
ENGLISH
To ignite burner, gently push-in and turn the control knob to position HIGH FLAME and maintaining the knob pushed
at the same time press the electronic ignition pushbutton. Once the burner is alight maintain the knob in this position
for a few seconds to the ensure the flame remains alight.
-MANUAL IGNITION HOB
THE FLAME MUST NEVER EXTEND BEYONDTHE EDGE OFTHE PAN. CENTRE THE
PAN OVERTHE BURNER ENSURING STABILITY ONTHE PAN SUPPORT.
- SELECTING BURNER
- ELECTRONIC IGNITION HOB (DEPENDING ON MODEL)
HOB
Manual ignition when the appliance is not fitted with the electronic ignition feature or in the event of failure in the
electronic ignition.
MAKE SURETHERE ARE NO PANS OR OTHER ANY OBJECTS ONTHE BURNERS
WHEN IGNITING.
IFTHE BRUNER DOES NOT IGNITE IMMEDIATELY REPEAT IGNITION AFTER
HAVING FOLLOWED EACH STEP BELOW:
•TURNTHE KNOBTO “SMALL FLAME”
• PROCEEDWITH MANUAL IGNITION
• CHECKTHERE IS SUFFICIENT GAS INTHE GAS BOTTLE.
IFTHE APPLIANCE STILL DOES NOT IGNITE SHUT OFFTHE GAS SUPPLY ATTHE
MAIN GASTAP AND CONTACTYOUR LOCAL DEALER.
MAKE SURETHERE ARE NO PANS OR OTHER ANY OBJECTS ONTHE BURNERS
WHEN IGNITING.
To ignite burner, gently push-in and turn the control knob to position HIGH FLAME and maintaining the knob pushed at
the same time light the burner with a match or gas lighter. Once the burner is alight maintain the knob in this position
for a few seconds to ensure the flame remains alight.
IFTHE BURNER DOES NOT IGNITE IMMEDIATELY CHECKTHERE IS SUFFICIENT
GAS INTHE GAS BOTTLE.
IFTHE APPLIANCE STILL DOES NOT IGNITE SHUT OFFTHE GAS SUPPLY ATTHE
MAIN GASTAP AND CONTACTYOUR LOCAL DEALER.
- HOB FLAME REGULATION
To regulate flame turn the knob to the desired cooking flame.

INSTALLATIONUSE
MAINTENANCE
19 ENGLISH
GAS CYLINDERS/BOTTLES
The appliance runs off standard gas bottles which can be found in the country of use.The type of gas to use is clearly
marked on the packaging and on the specifications label affixed to the rear of the appliance. However always respect the
following instructions: gas bottles must always be located and positioned in the compartment provided for this purpose.
They must always be vertical and fitted with a valve and pressure regulator. Do not obstruct or impede access to the
gas bottle to permit quick and easy access when replacing.
WARNING! When replacing the gas bottle always take the following precautions:
a) close all gas knobs (Pos. OFF);
b) make sure there are no flames or fires in proximity of the gas bottle;
c) close the gas valve on the bottle to be replaced;
d) unscrew the pressure regulator on the empty bottle and remove the bottle from the purpose compartment.This
procedure is inverted for fitting a new bottle. Check for gas leaks utilising a non-corrosive fluid. Do not use a water
and soap solution.
NEVER USE A FLAME TO CHECK FOR GAS LEAKS;
e) ignite the burners to check they function correctly. If there are problems call in an authorised gas service engineer.
AFTER APPLIANCE USE ALWAYSTURN OFF THE GAS TAP ONTHE BOTTLE
GAS LEAKS
We recommend the use of an electronic and homologated gas detector for checking ambient air.
If there is a smell of gas;
a) immediately open the windows and evacuate the vehicle or caravan.
b) do not turn on or off light switches or other electronic appliances, do not light matches or lighters or anything that
could cause the gas to ignite;
c) put out any flames
d) shut off the valve on the gas bottle or cylinder. Do not re-open this valve unless the gas leak has been identified and
eliminated.
e) contact a specialised gas service engineer.
NEVER OPERATE THE APPLIANCE WITH GAS AND OR AT GAS PRESSURES
DIFFERENTTOTHOSE INDICATED BY SMEV AS THIS COULD CAUSE IRREGULAR
AND INCORRECT OPERATION. SMEV DECLINES ALL RESPONSIBILITY FOR
DAMAGE OR INJURY CAUSED BY AN INCORRECT OR IMPROPER USE OFTHE
APPLIANCE.
VISUAL FLAME CONTROL
Depending on the type of gas used the flame should be:
Propane (G31): blue flame without yellow tips.
Butane (G30): flame with yellow tips when ignited which becomes more intense in colour as the burner heats.

INSTALLATION
USE
MAINTENANCE
BURNER Ø INJECTOR (mm)
SEMI-RAPID
Ø 62 mm
STAMPED N.
AUXILIARY
Ø 47 mm 0,50 50
RAPID
Ø 77 mm 0,75 75
When removing and mounting the injectors the injector holder must be must be held in place with the aid of a tool
(FIG. 5 - PG. 134).
0,67 67
20
ENGLISH
SMEV ACCESSORIES
GLASS LID (FIG. 6 - PG. 135) only for models PI8621A, PI8621S, PI8621R.
This optional accessory has two functions: when closed it can be used as an additional work surface and when open,
during cooking, it protects the wall behind the appliance from food splashes.
To request a GLASS LID, please contact your local dealer
TEST PRESSURE POINT (IF FITTED)
THE TEST PRESSURE POINT (PRESSURE CHECK VALVE) IS FITTED UNDER THE HOB. (FIG. 4 - PG. 133).
Removing and mounting this test pressure point (pressure check valve) must be performed by a qualified gas service
engineer. Gas pressure is related to the type of gas used to supply the appliance. Refer to chapter GAS in this manual.
BEFORE CLEANINGTHE APPLIANCE ALWAYSTURN IT OFF AND DISCONNECT
FROM POWER SUPPLY AND WAIT UNTIL IT HAS COOLED DOWN.
SURFACESTHAT ARE STILL HOT CAN BE DAMAGED IFTHEY COME INTO
CONTACTWITH COLD WATER OR A DAMP CLOTH.
NEVER USE ABRASIVE, CORROSIVE OR CHLORINE BASED CLEANING PRODUCTS.
NEVER USE STEEL OR PLASTIC SCOURING PADS. NEVER LEAVE DEPOSITS OF
ACID OR ALKALINE SUBSTANCES (VINEGAR, SALT, LEMON JUICE ETC.) ONTHE
APPLIANCE. STAINLESS STEEL OR ENAMELLED SURFACES MUST BE CLEANED
ONLY WITH WATER AND SOAP OR A NEUTRAL DETERGENT,THOROUGHLY RINSE
AND DRY. USE CLEAN SPONGES OR CLOTHSTO CLEAN.
INJECTORS
CLEANING OR REPLACING GAS INJECTORS MUST ONLY BE PERFORMED BY
AUTHORISED AND QUALIFIED GAS SERVICE ENGINEERS.THE MANUFACTURER
DECLINES ALL RESPONSIBILITY IN REGARD.
CLEANING

121 SLOVENSKI
OPOMBE

122
1 F I G .
A
C
D
B
B
A
B
C
D
135
135
500
30
mm

123
2 F I G .
X
Y
275 mm
10 mm
421.7 mm
54.9 mm
448 mm
478 mm
X
Y
478 mm
448 mm
253 mm
421.7 mm
R30 mm
R30 mm
151.7 mm
178 mm
135° 135°
R30
R30
129.8 mm
90°
29.8 mm
178 mm
225 mm
R253 mm
45 mm
285.7 mm
R167 mm
33.9 mm
R30
178 mm
R30
R30
178 mm
151.7 mm
R203 mm
5 mm
10
10
54.9 mm
208 mm
208 mm
A
A
SEZ.A-A
SEZ. B-B
193,01 mm
213,01 mm
205,97 mm
232,89 mm
Y
X
304,65 mm
212,14 mm
mm393mm393
57,91 mm
A
A
R2280,48 mm
176,73 mm
B
90°
R20
8,5 mm
SEZ.A-A
170,35mm57,69 mm
193,01 mm
R1035,5 mm
135°
R20
90°
60°
R20
B
445,89 mm
170 mm
R57 mm
18,4mm
12 mm
R57 mm
155 mm
8,5 mm
10 mm
31,6 mm31,6 mm
18,4 mm
MOD. X mm Y mm
7103
7123 786 445,89
MOD. X mm Y mm
8103VD
8103VDM
8123VD
8123VDM
956 416

124
222,36 mm
R173 mm
Y
R10
R10
R173
R173
45°
X
R10 mm
339,67 mm
22,5°
22,5°
314 mm
R10mm
R10 mm
R173 mm
90°
19 mm
R40 mm
R10
R173 mm
217 mm
R10
232,5 mm
191 mm
R10
300,25 mm
R10 mm
R10mm
11 mm
11 mm
11 mm
X
Y
R 173 mm
A
A
SEZ.A-A
X
Y
R88
R195
R182
99,05
R77
R208
R88
213
125,05
113,95
201,95
125,36
100
62
212,4
5,28
158,3
133,2
241,26
79,08
R693
89,07
106,05
X
Y
A
A
8,5
SEZ. A-A
MOD. X mm Y mm
MO8302
MO8322
MO8303
MO8323
MO8342
MO8362
666 426
MOD. X mm Y mm
PI8802D
PI8822D
PI8842D
PI8862D
MO8801D
MO8821D
511,02 408

125
R693
133,2
R182
R195
113,95
SEZ. A-A
R88
213
8,5
A
A
125,05
5,28
79,08
R77
241,26
158,3
99,05
125,36
R208
62
212,4
Y
X
100
201,95
R88
89,07 106,05
X
Y
MOD. Y mmX mm
511,02 408
PI8802S
PI8822S
PI8842S
PI8862S
MO8801S
MO8821S
X
Y2
Y1
0
13,8 13,8
13,8
13,8
816
950
67 67
7,223
0
5
450
50 316,6
R3039,3
R3045,3
46
135∞
6
6
40
135∞
6
12,3
12,2
14
14
A
A
B
7,5
18
150
1010
SEZIONE A-A
SCALA 1 : 5
6
R2,5
5
DETTAGLIO B
SCALA 1 : 1
18 mm
7,5 mm
SEZ.A-A
B
6 mm
5 mm
R 2,5
A
B
A
135°
135°
14 mm12,2 mm
13,8 mm
40 mm
X
804 mm
316,7 mm Y2
Y1
R 3045,3 mm
R 3039,3 mm
12,3 mm
Xmm
MO9122 816 316,6 322,7
MOD. Y1mm Y2mm

126
MOD. X mm Y mm
MO9202D
MO9222D 883 307
MOD. X mm Y mm
MO9202S
MO9222S 883 307
49 mm49 mm
70 mm
79,3 mm 494,5 mm
150,7 mm 439 mm158,9 mm
211,2 mm
141 mm70 mm
X
Y
125°
R45mm
R100 mm
96 mm
100 mm
45 mm
45 mm
125°
166 mm
2 mm
145°
15 mm
36,4 mm
748,6 mm
793 mm
65,8 mm65,8 mm
67,2 mm67,2 mm
R100
94 mm
100 mm
96 mm
94 mm
40 mm
145°
36,4 mm
45 mm
45 mm
R45 mm
166 mm
A
A
7 mm
SEZ.A-A
49 mm 49 mm
70 mm
79,3 mm494,5 mm
150,7 mm mm9,851mm934
211,2 mm
141 mm70 mm
X
Y
125°
R45mm
R100 mm
96 mm
100 mm
45 mm
45 mm
125°
166 mm
2 mm
145°
15 mm
36,4 mm
748,6 mm
793 mm
65,8 mm 65,8 mm
mm2,76mm2,76
R100 mm
94 mm
100 mm
96 mm
94 mm
40 mm
145°
36,4 mm
45 mm
45 mm
R45 mm
166 mm
A
A7 mm
SEZ.A-A

127
278 mm
139,40 mm
60°
159,27 mm
25,10 mm
225 mm
173 mm
A
9 mm
SEZ.A-A
R15 mm
R10 mm
R10 mm
R10 mm
R215 mm
R222,5 mm
R229 mm
R224 mm
R229 mm
A
X
MOD. X mm Y mm
7003
7023 456,2 466,1
228,1 mm 228,1 mm
238 mm
294,57 mm
13,51 mm
170,07 mm
193,1 mm
135°
433,17 mm
278,79 mm
278,79 mm
294,57 mm
X
Y
228,1 mm
193,1 mm 193,1 mm
R35 mm
228,1 mm 228,1 mm
238 mm
294,57 mm
13.51 mm
170.07 mm
193.1 mm
135°~
433,7 mm
278,79 mm
278,79 mm
294,57 mm
456,2 mm
466.1 mm
228,1 mm
193,1 mm 193,1 mm
R35mm
A
A
2 mm
SEZ. A-A
MOD. X mm
PI7203
PI7223
PI7703
PI7723
458

128
248 mm
248 mm
233 mm
179 mm179 mm
233 mm
301 mm
301 mm
273 mm 273 mm
R70 mm
R70 mm
R70mm
R70mm
135°
135°
135°
135°
8002
8003
214 mm 214 mm
Y
Y
X
X
R30 mm
R30mm
R30mm
R30mm
R30mm
R30mm
R30 mm
R30mm
248 mm
248 mm
233 mm
179 mm179 mm
233 mm
301 mm
301 mm
273 mm 273 mm
R70 mm
R70 mm
R70mm
R70mm
135°
135°
135°
135°
8002
8003
214 mm 214 mm
Y
Y
X
X
R30 mm
R30mm
R30mm
R30mm
R30mm
R30mm
R30 mm
R30mm
PI8002
PI8022
PI8042
PI8062
PI8502
PI8522
PI8542
PI8562
Xmm
466
MOD.
358
Ymm
PI8003
PI8023
PI8043
PI8063
PI8503
PI8523
PI8543
PI8563
Xmm
546
MOD.
428
Ymm

129
PI8403
PI8423
PI8443
PI8463
Xmm
572
MOD.
332
Ymm
8203
8203 M
8223
8223 M
Xmm
506
MOD.
416
Ymm
220 mm 205 mm 76 mm
76 mm
54 mm
92 mm
70 mm
70 mm
8,5 mm
202 mm199 mm
R55 mm
R71 mm
R311 mm
R531mm
25 mm
130 mm
199 mm
55 mm
216 mm
Y
135°
90°
A
X
X
Y
A
SEZ.A-A
R30 mm
178 mm
178 mm
Y
151,6 mm
151,6 mm
45 mm
135°
135°
R253 mm
R30 mm
446 mm
X
R30 mm
393,3 mm
R30mm
SEZ. B-B
B
B

130
X
X
Y
Y
224 mm
46 mm
4mm
4mm
R5 mm
54 mm
SEZ.A-A
AA
224 mm
3 mm
3 mm 3 mm
R54 mm
259,47 mm
R136,6 mm
143,5 mm
140 mm
77,54 mm
22,86°
143,24 mm
119,12 mm
R54 mm
160,14 mm 235 mm
X
Y
109,3 mm
104,13 mm
79 mm
235 mm
278,79 mm
R677 mm
278,79 mm
238 mm
R54 mm
235 mm
294,57 mm
25,98 mm
177,48 mm
R10 mm
R140 mm
R20 mm
101,6 mm
R101,6 mm
R140 mm
140 mm
R10 mm
R20 mm
110,09 mm
A
SEZ.A-A
A
135°
135°
228,1 mm
X
Y
5 mm
PI9003
PI9023
MOD. Y mmX mm
470 473
PI8621A
PI8621S
PI8621R
MOD. Y mmX mm
216 296