Smoothskin PURE User manual

1
IPL USER GUIDE

2 3
1. THE SMOOTHSKIN PURE SYSTEM
PACKAGE CONTENTS
Inside the packaging of SMOOTHSKIN PURE you will find the following:
• Handset and Base Unit
• Power Cable
• User Manual
Welcome to SMOOTHSKIN PURE
Congratulations! You’ve opened up a world of unparalleled beauty, smoothness and
convenience. Come and join in the conversation at the www.smoothskin.com where you
can find expert advice and support throughout your treatment.
1. THE SMOOTHSKIN PURE SYSTEM 3
2. HOW DOES SMOOTHSKIN PURE WORK 4
3. IMPORTANT SAFETY INFORMATION 5
4. POTENTIAL RISKS, SIDE EFFECTS
AND SKIN REACTIONS 13
5. BENEFITS OF USING SMOOTHSKIN PURE 15
6. WHAT IS THE INTENDED USE
OF SMOOTHSKIN PURE 18
7. YOUR SUITABILITY 18
8. HOW TO USE SMOOTHSKIN PURE 19
9. THE SKIN TONE SENSOR 23
10. THE SKIN CONTACT SENSOR 26
11. SMOOTHSKIN PURE MODES 28
12. CLEANING, MAINTENANCE, STORAGE 30
13. TRAVELLING WITH SMOOTHSKIN PURE 30
14. TROUBLESHOOTING 31
15. WARRANTY 32
16. LABELS AND SYMBOLS 33
17. TECHNICAL SPECIFICATIONS 35
Skin Tone
Sensor
Activation
Button
Mode Button
Power Bars Base Unit
Power
Cable
Treatment Window

Z
Z
Z
Z
Z
Z
Z
Z
Z
4 5
WHAT TO EXPECT
Immediately post treatment, you should not see any significant side eects from treatment
(Refer to Section 4 for more information on side eects).
In the first few weeks following the initial treatments, you will still see some hairs growing. These are
likely to be hairs that were missed during treatment i.e. they were lying dormant and not in their growth
phase (Anagen) during treatment; when IPL is most eective.
Around 6 weeks into the 12 week treatment programme you should see a reduction in hair growth.
However, many hairs may still not have been treated in their growth phase. It is important to continue
the weekly treatments.
After the 12 week programme, you should see a significant reduction in hairs within the treated area.
Any remaining hairs should be finer and lighter in colour. Continued monthly treatments, or treatments
as required, should maintain the reduction in unwanted hair.
3. IMPORTANT SAFETY INFORMATION
CONTRAINDICATIONS
DO NOT USE SMOOTHSKIN PURE if you have very dark skin. The skin tone sensor
located near the output window of the device will determine the tone of your skin. If
the skin tone sensor determines that your skin is too dark for safe use, operation of
SMOOTHSKIN PURE will be prevented.
SMOOTHSKIN PURE is designed to help break the cycle of hair growth. Light energy is transferred
through the skin’s surface and is absorbed by melanin present in the hair shaft. The absorbed light
energy is converted to heat energy (below the surface of the skin), which disables the hair follicle.
Treated hairs naturally fall out over the course of a few days to 1-2 weeks.
Hair growth is cyclical and follows 3 distinct and consecutive phases. IPL treatment is only eective
when hairs are in a particular phase (the Anagen – growth phase). Not all hairs are in the same
phase at any one time. This is why you should follow the recommended treatment regimen of
12 weekly treatments.
2. HOW DOES SMOOTHSKIN PURE WORK
SHAVE FLASH PREVENTS REGROWTH

6 7
DO NOT use SMOOTHSKIN PURE if your skin has been artificially or naturally
tanned or is burned from sun overexposure. Your skin may be extra sensitive
following sun exposure and particularly susceptible to burning, blistering,
discolouring or scarring if you use SMOOTHSKIN PURE. Wait 1 week until
sunburn or tan disappears before using SMOOTHSKIN PURE.
DO NOT expose treated areas to the sun. Wait at least 7 days after treatment
before exposing treated skin to direct sunlight. Your skin may be extra
sensitive following SMOOTHSKIN PURE treatment and particularly susceptible
to sunburn. Apply sunscreen (SPF 15 or greater) to the treated area or cover
the treated area with suitable clothing.
DO NOT use SMOOTHSKIN PURE directly on the nipples, genitals or around
the anus. These areas may have a darker skin colour and/or greater hair
density. Using the device in these areas may cause discomfort/pain or injure
(burn, discolour or scar) your skin.
DO NOT use SMOOTHSKIN PURE if you have a history of skin cancer or pre-
cancerous lesions (e.g. nevi or a large number of moles).
DO NOT use SMOOTHSKIN PURE if you are pregnant, lactating, as this device
has not been tested with these individuals.
DO NOT use SMOOTHSKIN PURE on dark brown or black spots such as
birthmarks, moles or warts in the area you wish to treat. Using the SMOOTHSKIN
PURE may injure your skin or make existing conditions worse. You may
experience side eects such as burns, blisters and skin colour changes
or scarring.
DO NOT use SMOOTHSKIN PURE if you have any skin condition in the treatment
area, including psoriasis, vitiligo, eczema, acne, herpes simplex or active
infections or wounds.
DO NOT use SMOOTHSKIN PURE if you are under the age of 18 as this device
has not been tested on these individuals.

8 9
WARNINGS
EYE SAFETY
SMOOTHSKIN PURE emits flashes of intense pulsed light. Direct exposure is
potentially harmful to your eyes. Take care to follow the safety precautions below.
The handset can only be activated (flashed) if the skin tone sensor (next to the
treatment window) detects a valid skin tone reading and is in full contact with the
treatment area. However:
DO NOT look directly into the treatment window of the handset when the system
has electrical power and is switched on.
DO NOT attempt to activate (flash) the system towards the eye.
DO NOT treat areas around the eye (eyebrows or eyelashes). ONLY attempt to
activate (flash) the system when the front of the handset is in good contact with the
area you wish to treat. WE RECOMMEND you look away from the handset when
firing onto your skin.
ELECTRICAL AND SAFETY
As with any electrical device, certain
precautions must be taken in order to ensure
your safety.
DO NOT try to open SMOOTHSKIN PURE, as
this may expose you to dangerous electrical
components.
DO NOT use if SMOOTHSKIN PURE is
damaged; for example, cracked handset, cable
damage (internal wires visible), cracked or broken glass on the handset, etc.
This may result in injury.
DO NOT use near bathtubs, showers, basins or other vessels containing water.
If SMOOTHSKIN PURE becomes wet, it should not be used.
DO NOT use if SMOOTHSKIN PURE becomes uncomfortably hot to touch.
This may indicate that the unit is damaged.
DO NOT use a power supply or other component, other than those provided for
Glass filter

10 11
use with SMOOTHSKIN PURE. This may damage the unit and cause it to stop
working.
DO NOT attempt to activate (flash) SMOOTHSKIN PURE onto any surface other
than skin. WARNING no modification of this equipment is allowed.
DO NOT position SMOOTHSKIN PURE so that it is dicult to disconnect from the
mains supply.
GENERAL SAFETY
DO NOT USE if you have had a skin peel treatment on the area you wish to treat.
Please wait 30 days after a skin peel before treating with SMOOTHSKIN PURE.
Treating tanned skin with Intense Pulsed Light (IPL) may result in permanent
Hyperpigmentation (Darkening) or Hypopigmentation (lightening) of the treated
skin.
DO NOT USE If you have a known sensitivity to sunlight (photosensitivity) or are
taking medication that makes the skin more sensitive and causes photosensitivity,
e.g. Retin A, Accutane and/or other topical retinoids. Always check the instruction
leaflet that comes with your medicinal product, to see if photosensitivity is
listed as a side eect. Use of SMOOTHSKIN PURE on photosensitive skin could
result in skin damage such as swelling or blisters. SMOOTHSKIN PURE should
be kept out of the reach of children under 18 years of age. Children should not
use, play with, maintain or clean the device. There are a number of potential
risks – exposure to the light output causing burns or eye damage, electrocution,
strangulation from the cables.
SMOOTHSKIN PURE should be kept out of reach of pets and pests which could
damage the device. Potential risks include reduced function and electrocution.
SMOOTHSKIN PURE is not intended for use by persons with reduced physical,
sensory or mental capabilities. Unless they have been given supervision
or instruction concerning safe and proper use of the device by a person
responsible for their safety.
SMOOTHSKIN PURE glass filter is a critical component that will get hot during
use.
DO NOT touch the filter during or directly after use. Regularly inspect the filter for
damage.

12 13
SIDE EFFECT HOW TO ASSESS & REACT
Mild pain / discomfort in the area being treated. This is expected and is normal for all IPL treatments.
You can keep on using the device as instructed, and
the pain should diminish with continued use.
Warm feeling or tingling sensations during treatment,
which typically disappear after a few seconds to a minute
and decrease with continued use.
This is expected and is normal for all IPL treatments.
You can keep on using the device as instructed.
Itchiness in the treatment area. This is quite common for IPL treatments, and should
subside after a short period. You can keep on using the
device as instructed. Do not scratch the area.
Skin redness during or after treatment which disappears
within minutes.
This is expected and is normal for all IPL treatments.
You can keep on using the device as instructed once
skin redness has disappeared.
4. POTENTIAL RISKS, SIDE EFFECTS
AND SKIN REACTIONS
Use of SMOOTHSKIN PURE could result in side eects. The table below lists the known skin reactions
that may occur following treatment with SMOOTHSKIN PURE.
DO NOT use SMOOTHSKIN PURE if the filter is cracked or missing.
Ensure that SMOOTHSKIN PURE treatment window is clean and free from debris.
Any debris on or around the treatment window during operation may result in
temporary skin changes such as redness or swelling.
PRECAUTIONS
Hair removal by lasers or intense pulse light sources can cause increased hair
growth in some individuals. Based upon currently available data, the highest
risk groups for this response are females of Mediterranean, Middle Eastern, and
South Asian heritage treated on the face and neck.
DO NOT use SMOOTHSKIN PURE on any area where you may want hair
to grow back.
DO NOT use SMOOTHSKIN PURE device on man’s face, jaw, or neck. The hair in
a man’s beard area is too dense and using SMOOTHSKIN PURE device in these
areas may result in skin injury.
SMOOTHSKIN PURE is not recommended for use on red, grey or blonde hair.
SMOOTHSKIN PURE is not eective on these hair colours.

14 15
IN VERY RARE CASES HOW TO ASSESS AND REACT
Swelling and redness that does not disappear within
two to three days.
Stop using the device immediately and consult your
physician before using it again.
Temporary changes in skin colour (lightening
or darkening).
If your skin colour changes, stop using the device
immediately and consult your physician.
Blistering or burning of the skin. Stop using the device immediately and consult your
physician before using it again. Apply a cold pack to the
area. Treat with antiseptic or burn cream.
SIDE EFFECT HOW TO ASSESS & REACT
Skin redness which does not disappear within minutes
and lasts 24-48 hours.
Stop using the device immediately and consult your
physician before using it again.
Pain or discomfort that is intense during treatment or
persists after a treatment.
Stop using the device immediately and consult your
physician before using it again.
In a clinical trial of 50 subjects, each subject received 12 weekly treatments. The recorded eects were:
• Itchiness – Four subjects experienced mild itchiness after treatment.
• Slight Redness – This was reported by 1 subject.
• Mild Stinging Sensation – Five subjects reported mild discomfort following treatment.
• In-growing Hair – One subject reported experiencing an in-growing hair following treatment.
• Follicle Redness – One subject reported a red spot at the treatment site following treatment.
In all cases, the treated skin returned to normal within 7 days.
5. BENEFITS OF USING SMOOTHSKIN PURE
SMOOTHSKIN PURE is indicated for the permanent reduction of unwanted hair.
A clinical trial was performed to assess both the safety and ecacy of SMOOTHSKIN PURE.
The key features of the clinical trial were:
All treatments were performed by non-medically trained operators at a single location using devices
identical to SMOOTHSKIN PURE provided in this package.
All subjects were required to complete questionnaires related to their general health and those who
could not be treated, e.g. those who had one or more of the contraindications as listed in Section 3 of
this User Manual were excluded. In addition, all subjects were required to provide Informed Consent as
per international clinical trial requirements.

16 17
A total of 53 female subjects, aged between 19 and 45 years old, commenced the trial.
Three subjects left the trial during the treatment period for personal reasons. No subjects left the trial
due to problems associated with the use of SMOOTHSKIN PURE.
Each subject received 12 weekly treatments to their chosen body location. A typical treatment consisted
of shaving the site then applying SMOOTHSKIN PURE following the same process as outlined in
Section 8, Step 3 of this user manual.
Hair counts were used to measure the change in the amount of hair 6 months after the last treatment
and 12 months after the last treatment. The hairs in the treatment sites were counted via high resolution
photography and the dierence in hair counts was calculated as a percentage change.
When used as directed, the clinical trial participants showed on average 44% less hair 6 months after
their last treatment and 36% less hair 12 months after their last treatment when compared to hair counts
taken before treatment (See Table below). Actual results did vary from person to person.
SMOOTHSKIN PURE
Number of Subjects at 6 Months Post Treatment. 50
Hair Reduction at 6 Months Post Treatment. 43.9%
Number of Subjects at 12 Months Post Treatment. 33
Hair Reduction at 12 Months Post Treatment. 36.0%
% of Subjects met success (>30% hair reduction) on all
body areas at 12 months post-treatment. Subject Success is
defined as greater than 30% hair reduction at all treatment
sites at 12 months.
66.7%
The incidence of side eects during the clinical trial was minimal (as outlined in Section 4 above)
and the majority of subjects (48 out of 50) would recommend SMOOTHSKIN PURE to their friends.

18 19
6. WHAT IS THE INTENDED USE
OF SMOOTHSKIN PURE
INTENDED USE
SMOOTHSKIN PURE is intended for the permanent reduction in unwanted hair.
7. YOUR SUITABILITY
BODY AREAS
SMOOTHSKIN PURE is suitable for use on body hair and female facial hair below the cheekline.
SKIN COLOUR
SMOOTHSKIN PURE is suitable for use on light, medium and dark skin tones, up to and including
skin tone 5.
SMOOTHSKIN PURE incorporates a skin tone
sensor that measures the colour of your skin and will
prevent use if your skin tone is too dark.
HAIR COLOUR
The SMOOTHSKIN PURE is suitable for use on
naturally black or brown hair. It may not be as
eective on white, grey, blonde or red hair.
8. HOW TO USE SMOOTHSKIN PURE
WARNING: Follow each step in the treatment process ensuring you complete all aspects of each step
before progressing to the next.
STEP 1: PREPARE THE AREA TO BE TREATED
Remove all visible hair by shaving. Make sure there is no hair remaining above the surface of the skin to
ensure optimal treatment and prevent debris from covering the front of SMOOTHSKIN PURE.
Cleanse the treatment area and pat dry. Remember, don’t use any gels or creams with this device!
STEP 2: DOING A TEST PATCH
Before your first treatment on each new body area, we RECOMMEND you test your skin in that area for
a reaction to SMOOTHSKIN PURE.

20 21
The patch test area should be approximately 3cm x 2cm in size (equivalent to 2 flashes applied to the
skin side by side). Follow Step 3 to treat the area.
Wait 24 hours following the patch test, to ensure your skin is suitable for treatment and there is no
adverse reaction to the light energy. If there is no reaction after 24 hours, you may treat the area around
the patch test. The ‘patch tested area’ should NOT be re-treated for at least 1 week.
STEP 3: TREATING WITH SMOOTHSKIN PURE
A) Plug the power supply into an electrical outlet. The fans will start up and the skin sensors will light up
blue, indicating the device is switched on.
POWER MODE TIMEOUT
When the unit is left “inactive” i.e. no buttons are pushed for 10 minutes then the unit will revert
to STANDBY mode, and the skin sensor lights will switch o. To return to READY mode for
treatment, press the Power Mode button.
B) Press the handset firmly against the area to be treated ensuring the skin sensors are in contact
with the skin – SMOOTHSKIN PURE will not operate if the skin sensors are not in full contact with
skin. Once the skin sensors measure a valid skin tone, the pre-set output power is displayed on the
power bars.
Always perform a patch test on each new
treatment area
Observe for
adverse events
12
24 Hours
1
2
3
4
5
6
7
8
9
10
11
IncorrectCorrect
Skin Detection
Indicator On Indicator O
No Skin Detection
Skin tone sensor
Skin contact sensor Treatment window

22 23
C) Press the activation button. The device will flash, and a warm sensation should be felt
D) Move the handset to the next area to be treated and repeat. The device needs to recharge
between flashes.
E) Ensure that the ENTIRE AREA receives treatment, but DO NOT overlap treatment pulses.
Treatment
Window
Full Coverage Overlapping Missed Areas
TREAT TREAT7 DAYS
Always wait 7 days before
treating the same area again
STEP 4: YOUR SMOOTHSKIN PURE
TREATMENT SCHEDULE
For optimal results, SMOOTHSKIN PURE should be
used every week for 12 weeks to ensure all hair
follicles are treated.
STEP 5: SWITCHING OFF THE SMOOTHSKIN PURE
When treatment is finished, SMOOTHSKIN PURE should be unplugged from the Electrical Outlet.
Refer to Section 11 for details of how best to look after your SMOOTHSKIN PURE.
9. THE SKIN TONE SENSOR
The skin tone sensor measures the colour of your skin and sets the correct level of output power
needed. If your skin is too dark for treatment with SMOOTHSKIN PURE, the skin tone sensor will
detect this and prevent the unit from operating. RED lights will be shown in the Power Bar if your
skin is too dark.
The status of the skin tone sensor can be seen on the power bars located on both sides of the handset.
If a valid skin tone is detected, the power bars will illuminate WHITE. The number of lights illuminated
will be dependent upon your exact skin tone.

24 25
Less lights = Darker skin and Lower Power Setting
More lights = Lighter skin and Higher Power Setting
POWER BARS
SKIN TOO DARK
NO TREATMENT POSSIBLE
1 RED LIGHT ILLUMINATED
NOT SUITABLE SUITABLE
DARK SKIN
LOWEST POWER SETTING
1 LIGHT ILLUMINATED
LIGHT SKIN
HIGHEST POWER SETTING
10 LIGHTS ILLUMINATED
Number of Power Bar Lights Illuminated Energy (J/cm2)
10 6.00
9 5.78
8 5.56
7 5.33
6 5.11
5 4.89
4 4.67
3 4.44
2 4.22
1 4.00
The amount of light energy delivered for each of the device settings when in Power Mode (depending
on skin colour) is shown in the table below.

26 27
10. THE SKIN CONTACT SENSOR
SMOOTHSKIN PURE is fitted with a skin contact sensor that checks your skin contact before each flash,
making sure the device is safe to operate! This makes the device compliant with the most stringent
safety regulations.
The skin contact sensor also ensures you get the best results from your device. The sensor must be in
full contact with the treatment area in order for the device to flash.
This full contact with your skin means that all the light energy emitted from the device reaches the
treatment area to deliver the best results.
If the device is not in full contact with the treatment area, the device will not fire. Try adjusting the
positioning of the device to ensure full contact is achieved, particularly on more awkward areas like
arms and shins.
ARM ARM
ARM ARM
GAP
GAP

28 29
11. SMOOTHSKIN PURE MODES
You can treat your body using any one of the three SMOOTHSKIN PURE treatment modes:
Power Mode – No Indicator Gentle Mode – Indicator On Speed Mode – Indicator On
Gentle Mode can be used if you find Power Mode uncomfortable or a little too painful. Operating the
device in Gentle Mode will reduce the power output, and you will notice less Power Bar indicators
illuminated when applied to your skin.
Speed Mode is the fastest mode, and therefore the lowest power mode. Speed Mode is best for
treating larger areas where the hair is less dense (such as arms or legs), and where you want to move
along the treatment area quickly. It can also be used as a maintenance mode, to be used to keep hair
regrowth at bay after your initial treatment regime.
Power Mode is the highest power setting of the device. Power Mode will deliver the best results, as it is
using the maximum power output possible for your unique skin tone. This mode works particularly well
on stubborn areas where the hair tends to be denser, such as underarms and bikini line.
Activation
Button
Mode Button
Power Mode is the default setting when your device is switched on.
You can toggle between the three modes pressing the Mode Button
underneath the main Activation Button.
When in any of these modes, you can also choose whether to use Glide
Method or Stamp Method.
Stamp Method is recommended for small areas such as the underarm
and bikini line. Place the handset on the skin, press & release the
activation button. Remove from the skin before carefully re-applying to
the next treatment area.
Glide Method is recommended for larger areas such as legs. Place
the handset on the skin, hold down the activation button (press down
continuously), then glide the handset along the skin between flashes. Try
to move the handset at a steady speed that gives full coverage without
overlap or missed areas.

30 31
12. CLEANING, MAINTENANCE, STORAGE
After treatment, always switch o SMOOTHSKIN PURE by unplugging the power supply from
SMOOTHSKIN PURE and the electrical outlet.
After use, the handset, skin tone sensor and treatment window should be inspected for damage and
wiped down with a dry, lint free cloth.
WARNING: The glass filter can get hot during use. DO NOT touch or clean the filter for at least 5
minutes after use to allow it to cool down.
NEVER use water or other cleaning fluids, as these can damage the device leading to a potential
safety hazard.
To ensure maximum performance of your SMOOTHSKIN PURE, it is particularly important to keep the
front of the device and reflector free from dirt, hair or other debris.
To aid in the cleaning of this part, the front of the device can be cleaned with a slightly damp cloth.
Store SMOOTHSKIN PURE in a cool, dry place. Make sure that the treatment window and skin tone
sensor on the handset are protected from damage.
Regularly check the device (including cords) for visible signs of damage. In case of damage or cracks,
stop using the device. To prevent strangulation or tripping hazard, always unplug the device from power
socket when not in use.
13. TRAVELLING WITH SMOOTHSKIN PURE
The power supply unit of SMOOTHSKIN PURE is universal and will work with all commonly encountered
mains supplies. Providing you have a suitable adaptor for the mains power cable plug, SMOOTHSKIN
PURE will operate as normal.
PROBLEM SOLUTION
The power bar indicators on the side of the handset
do not light up when placed against your skin.
Make sure the power supply is plugged in. Make
sure the handset is in READY mode (press the
Standby/Ready button once). Ensure the skin
sensors are pressed against the skin.
Whilst pressed against your skin, the first power bar
indicator on the side of the handset is illuminated
RED, and SMOOTHSKIN PURE will not work.
The area you are trying to treat is too dark for
treatment. SMOOTHSKIN PURE includes an
intelligent skin tone sensor that automatically
detects your skin tone and selects the optimal
treatment setting. Due to the nature of Intense
Pulsed Light technology, SMOOTHSKIN PURE is
not for everyone and cannot treat very dark skin.
The power bar indicators on the side of the handset
are on or are flashing in an unfamiliar pattern
including a red LED indicator light.
SMOOTHSKIN PURE will display any error
messages through combinations of lights the on
the power bars on the sides of the handset. This
indicates that there is a fault with the device.
Stop using the device and refer to the website.
SMOOTHSKIN PURE handset, treatment window,
power supply or cable are damaged, broken,
cracked or appear defective.
DO NOT USE. If you are in any doubt about the
safety of SMOOTHSKIN PURE or suspect it is
damaged in any way, it must not be used, and
you should refer to the website.
14. TROUBLESHOOTING

32 33
15. WARRANTY
We grant a 2 year warranty on the product starting on the date of purchase. Within the warranty
period, we will check faults in materials or workmanship free of charge and replace the complete
device, at our discretion. This warranty extends to every country where this device is supplied by
CyDen or its appointed distributor.
This warranty does not cover damage due to improper use, normal wear or use as well as defects
that have a negligible eect on the value or operation of the appliance. The warranty becomes void if
repairs are undertaken by unauthorised persons and if original SMOOTHSKIN PURE parts are not used.
To obtain service within the warranty period, please visit our website www.smoothskin.com
16. LABELS AND SYMBOLS
SMOOTHSKIN PURE is marked with the following symbols:
Type BF Applied Part Australia Regulatory
Compliance Mark
Class II Equipment China RoHS environmental
protection use period
Follow Instructions for use Warning Optical Radiation from
device may cause eye injury
WEEE waste disposal mark of
the European Union
EAC Conformity Marking for
Custom Union
European Conformity Marking Trefoil compliance mark for
Ukraine
Keep Dry FCC EMC compliance
for North America

34 35
FCC STATEMENT:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
17. TECHNICAL SPECIFICATIONS
SMOOTHSKIN PURE is a filtered broadband Intense Pulsed Light system with the following technical
specifications:
•Repetition Rate: Manually pulsed every 0.45 to 1 second (dependent on treatment
setting), Continuous operation
• Pulse Length: Free discharge FWHM = 2.0ms
• Max Optical Output: 3 - 6J/cm2
• Wavelength: 510 – 1100nm
• Power Line Input: 100–240V~, 50/60Hz,1.7-0.91A
• Operating temperature: Between 5°C and 40°C
• Operating humidity: Up to 93%R.H. non condensing
• Operating Pressures: 700hPa to 1060hPa
• Treatment area (spot size): 3 cm2(30mm x 10mm)
The area directly around the treatment window is classified as the Applied Part, and can reach a
maximum temperature of 60degC. Ensure SMOOTHSKIN PURE is used as directed in Section 8.

36 37
TRANSPORT CONDITIONS:
• Temperature: -25°C to +70°C
• Humidity: Up to 93%R.H. non condensing
• Pressures: 500hPa to 1060hPa
If the device has been stored at temperatures outside of the stated operating range, the please allow at
least 30 minutes before use to allow the device to acclimatise.
SMOOTHSKIN PURE has unlimited flashes and is intended for a single user.
Minimum expected service life is 10 years when following the recommended regimen.
CE marking certifies that this appliance conforms to the following EU Directives:
•Low Voltage Directive 2014/35/EU
•Electromagnetic Compatibility Directive 2014/30/EU
•Energy related Product Directive 2009 / 125 / EC.
SMOOTHSKIN PURE complies with the latest EMC Standards and Amendments applicable to
Household and Medical Devices. These are: EN 55014-1:2017, EN 55014-2:2015, EN 61000-3-2:2014, EN
61000-3-3:2013, IEC 60601-1-2:2014 (Ed 4.0), FCC CFR 47 Part 15.107 & 15.109, ICES-003 Issue 6.0
SMOOTHSKIN PURE complies with the latest Safety Standards and Amendments applicable to
Household and Medical Devices.
These are: IEC 60335-1:2010 + Ams, IEC 60335-2-23:2003 + Ams, EN 62233, IEC 60601-1:2005 (Ed
3.1) +A2:2012, IEC 60601-2-57:2011, IEC 60601-1-6:2010 + Ams, IEC 62366-1:2015, IEC 60601-1-9, IEC
62304:2006 + Ams, CAN/CSA - C22.2 No 60601-1:2008 and 2014, ANSI/AAMI ES 60601-1:2005 + Ams
For further details contact CyDen Ltd
DISPOSAL (end of life)
In order to minimize hazards to health and the environment and ensure that materials can be recycled,
this product should be disposed of at a separate collection facility for waste electrical and electronic
equipment. The WEEE symbol marked on the product is there to remind you.

38 39