Snap-On Thermal Laser User manual

QUICK-START GUIDE
BC
micro USB Jack
Trigger
Power
Cancel
selection
Accept
selection
Navigate the
menu
Battery
Charge
Indicator
Up / Down
Left / Right
Select laser or
thermal
modes
- Y (Yes)
- N (No)
Charge the battery,
and connect to PC
Capture
screenshots
Getting Started
1. Connect the supplied USB cable to
the micro USB jack, and to the USB
power supply adapter.
2. Connect the USB power supply
adapter to a live power source.
Your Thermal Laser is shipped with
a partial battery charge.
Fully charge the battery before use.
Charging
Charged
LED
Spotlight
Camera
Lens
Features
1. Press to select one of six
thermal views.
2. Hold trigger in and point laser at
object.
Laser Spot Temperature Mode
Thermal Mode
3. Release trigger to capture
screenshot, then press “Y” to save it.
1. Press until “Press TRIG to start
measurement” displays.
2. Point at object.
3. Pull trigger to capture screeenshot,
then press “Y” to save it.
On / Off
Laser
Thermal
Lens

Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. All other marks are trademarks or
registered trademarks of their respective holders. ©2019 Snap-on Incorporated. All pictures and illustrations shown are for reference
purposes only. All information including specifications herein are subject to change without notice. ZEETH311A1 Rev. B
North America
Australia / New Zealand
Phone:
E-mail:
Website (User Manual):
United Kingdom
Phone:
E-mail:
Website (User Manual):
LED
Spotlight
Indicator
View
Indicator
Settings
Delete
Gallery
Thermal Views
Laser Spot
Temperature
Take spot measurements
quickly.
Blend the visual and thermal image.
Battery Charging
Level Indicator
[phone]
[email protected]
diagnostics.snapon.co.uk
(New Zealand) 0800 762 766
[email protected]
www.snapontools.com.au
Warranty Registration:
U.S. :
Phone:
E-mail:
Website (User Manual):
Canada:
Customer Support
Toolbar / Views / Emissivity
Save
Setting Emissivity
To accurately calculate temperature, choose the applicable emissivity level.
Select > Advanced > Emissivity
0.15 - Aluminum, Chrome (highly reflective)
0.35 - Polished Cast Iron and Steel
0.55 - Mild Oxidized Iron and Steel
0.75 - Strong Oxidized Iron and Steel, Leather
0.95 - (Standard) Plastic/Rubber, Painted Metal - flat non-reflective
Options:
(Australia) 1800 810 581
[phone]
[email protected]
diagnostics.snapon.com/usermanuals
registration.snapon.com/products/ca
registration.snapon.com/products/us
20% 40% 60% Diffused Beam Laser Spot
Use of the device acknowledges your acceptance of the End User License Agreement. The Snap-on Incorporated Software End User
License Agreement is available at: eula.snapon.com/diagnostics
For a listing of Snap-on products that are protected by patents in the United States and elsewhere, visit: patents.snapon.com