SNAP WATTBOX WB-200VB-IPCE-6 User manual

pg.1
© 2014 WattBox™
OWNERS MANUAL
WB-200VB-IPCE-6
KEY FEATURES
Surge Protection with Fireproof MOVs - Advanced Ceramic MOV technology reduces risk of re from surges.
Surge Disconnect - In the event of a catastrophic surge event, this Wattbox™ component will sacrice itself and permanently
disconnect AC Power.
Noise Filtration - Eliminates AC noise to improve picture and sound quality.
Flexible Power Cords - Wattbox™ power cords are both exible and durable and designed for ease of installation.
Secondary Protection - Protected 3 GHz signal coax/satellite connections plus Ethernet / Telephone connections.
Flexible Mounting - Flat, compact design for easy mounting in a Structured Wiring enclosure, on a wall, or behind a desk or TV.
IP Control - Provides control of outlets over an IP network. Cycle outlet state, turn outlets On or Off through a web browser.
Auto Reboot - Monitors network activity and resets power to outlets when programmable conditions are met.
Outlet Control Scheduling - Congure outlets to turn Off or On at a specic date or time.
System Notications - Programmable email notications keep you informed of System Status Changes.
WELCOME TO WATTBOX™
WattBox™ power products are designed specically to provide customers with advanced protection for their valuable electronics and
Custom Integrators with maximum exibility for installation. With this IP-enabled power conditioner, both service calls and system
downtime are reduced, and the self-healing Auto Reboot feature automatically resets components that become unresponsive on the
network. Plus you get a host of remote access features to monitor and control individual outlets – even receive email notications that
keep you informed about the system’s status.
Rest assured that WattBox™ products will deliver the protection and safety for your customers’ needs. All WattBox™products are
UL certied and built with the highest quality components available, such as Fireproof MOVs. Whether in a rack, a structured wiring
enclosure, or behind a at screen, the versatile mounting options offer simple installation of WattBox™for easily managing power
cords, adapters, and signal cables. WattBox™ is the ideal choice for Custom Integrators who demand reliability, safety, and exibility
when installing power products for their valued customers.
™
F
I
V
E
Y
E
A
R
L
I
M
I
T
E
D
P
R
O
D
U
C
T
W
A
R
R
A
N
T
Y
SURGE
PROTECTOR
$25,000
WB-200VB-IPCE-6

pg.2
WATTBOX™ WB-200VB-IPCE-6 Owners Manual
PACKAGE CONTENTS
(1) WB-200VB-IPCE-6
(1) Owner’s Manual
(1) OvrC Quick Start Guide
(1) WB-IP Quick Start Guide
(1) CD-ROM with WattBox Utility Software
(1) Sheet of Power Cord Labels (6 total labels)
(10) Mounting Bracket/Ear Screws (M3 x 0.5)
(4) Rubber Feet
(1) 4 foot Power Cord with 360° Swiveling Head
(1) 6 inch Power Cord (for use in enclosures and structured wiring cans)
(1) 6 inch Extension Cord
(2) Right Angle Mounting Brackets
(2) Structured Wiring Can Mounting Brackets
(1) Ethernet Cable
1. IP Controlled Outlets Banks 1-2 (Each bank switches both outlets together as a pair)
2. Always On Outlet Bank
3. Indicator LEDs
4. Factory Reset Button
5. Protected pass-through for Ethernet / Telephone (RJ45)
6. RJ45 Network Connection
7. Removable Power Cable
8. Protected pass-through for 3 Ghz coax cable/satellite
9. On/Off Bank Indicator LEDs
10. Power Switch
DEVICE LAYOUT
1 2 5 6 7
8 9 10
WB-200VB-IPCE-6
3 4

WATTBOX™ WB-200VB-IPCE-6 Owners Manual
pg.3
© 2014 WattBox™
MOUNTING OPTIONS
Wirepath™ and Strong® Structured Wiring Enclosures
The WB-200VB-IPCE-6 can be installed in some Wirepath™ and Strong® structured wiring enclosures that are equipped with a bottom knockout.
Check the WattBox Product page at SnapAV.com for a complete list of compatible enclosures.
The Strong SM-RBX-PRO-14 is pictured for reference below. See the instruction manual for the enclosure being used for mounting instructions.
Use the included 6 inch power and extension cords when installing the WattBox in enclosures to save space.
LED OPERATION
Internet — Green (Solid) All sites/IP addresses are communicating with the WattBox.
Green (Flashing) At least 1 (not all) sites/IP addresses are communicating with the WattBox.
Red (Solid) None of the sites/IP addresses are communicating with the WattBox.
System Status — Green (Solid) WattBox processor is operating and can be accessed via the WattBox interface.
Green (Flashing) Firmware for the WattBox processor is being updated.
(During this state the WattBox cannot be accessed via the interface.)
Red (Solid) WattBox processor is NOT in an operating state. Press the reset button.
Auto Reboot — Green (Solid) Auto Reboot is enabled. WattBox power cycle outlets that are ON when communication
with assigned website/IP addresses are lost. Outlets that are OFF will not power cycle.
Off Auto Reboot is disabled.
Protected — Green (Solid) The WattBox is powered on and outlets are protected.
Off The WattBox is not powered on or the MOVs have opened due to a short circuit.
Grounded — Green (Solid) Incoming AC outlet is grounded.
Off Incoming AC outlet is NOT grounded & needs inspection by an electrician .
B1/B2/B3 — Green (Solid) Outlet bank is on.
Off Outlet bank is off.
1. Fasten the brackets to the WattBox
using 4 of the included bracket
screws.
2. Open the knockout in the bottom of
the enclosure(not pictured). Insert
the WattBox after the enclosure is
installed.
3. Fasten the brackets to the enclo-
sure using 4 screws. These screws
will be supplied with the enclsure.

pg.4
WATTBOX™ WB-200VB-IPCE-6 Owners Manual
SURFACE MOUNTING
The WB-200VB-IPCE-6 may be mounted into a cutout or at on a wall using the included angle brackets.
1. For wall mounting, locate wall studs using a stud nder (not included).
2. For installation in a cutout, trace the outline of the back of the WattBox on the surface to be cut and cut out the opening.
3. Attach the brackets to the WattBox in the desired fashion. Use 5 screws to secure each bracket.
4. Position the WattBox in the desired mounting location and mark the locations for mounting hardware.
5. Secure the Wattbox™ to the surface using the included screws and anchors.
Brackets Attached for Cutout Mounting
Brackets Attached for Cutout Mounting

WATTBOX™ WB-200VB-IPCE-6 Owners Manual
pg.5
© 2014 WattBox™
IP CONNECTIONS AND SETUP
Connect the WattBox™ and any equipment monitored and powered by the WattBox to the local network as illustrated.
After installation, you may set up this device in your OvrC account, and use the Wattbox Utility and web interface to congure LAN-only
settings. To ensure reliable integration with other IP equipment, set up a static IP address for the WattBox.
OvrC Setup — See the OvrC documentation included in the box with this manual or go to OvrC.com.
WattBox Utility Setup — Load the CD included in the box into a PC on the network. Open the “WattBox IP QSG” PDF and follow the
instructions for using the Utility software.
Web Interface Access — After using the WattBox utility, you may access the web interface locally to continue IP conguration. Go to
SnapAV.com and visit the support tab for this WattBox product for web interface documentation.
Internet
161514131211109
12345678
abc def ghi jkl mno pqrs tuv
wxyz 0
＊
#
PAGE
REC
ALARMRESET
CALL MODE/ MENU/ESC BACK PTZ
ENTER
HDD
NET
/
SEARCH SEQ/ MUTE/NEXT DEL X2/GOTO
ID
WPS-300-DVR-9CH
Web Browser
Access
Mobile Apps
Web Interface / Utility
WB-200VB-IPCE-6
NETWORK
BANK 1 BANK 2 ALWAYSON
Router
Network Device
Connected to IP-Controlled
WattBox Outlet
WB-200VB-IPCE-6
Access WattBox web interface
from PCs on the LAN
OvrC Web Server
Use OvrC Web and smartphone
apps to monitor the WattBox
remotely

pg.6
WATTBOX™ WB-200VB-IPCE-6 Owners Manual
IMPORTANT SAFETY INSTRUCTIONS
Read and observe the following safety points at all times.
WARNING – Power Sources
Do not plug this Component into a power outlet that differs from the source indicated for safe use on the Component. If you don’t know
the type of electrical power that is supplied to your home, consult your local power company or a qualied electrician.
WARNING – Grounding and Polarization
This plug is designed to be inserted into a grounded-type outlet only. Do not force the Component plug into an outlet that is not
designed to accept a three-wire grounded-type AC plus (three prong plug) Never attempt to dismantle the plug in any way (or to alter
the power cord), and do not attempt to defeat the grounding feature by using a 3-to-2 prong adapter. If you have questions about
grounding, consult your local power company or a qualied electrician.
This Wattbox™ component requires a properly grounded outlet for safety and to protect connected equipment. If you’re not sure if your
home’s electrical wiring is properly grounded, have it checked by a qualied electrician.
If any rooftop devices such as satellite dishes, antennas, or any other component with wire being used that connects to the
Component, be sure the wire(s) is properly grounded. This protects against voltage surges and static charges.
Do not place any antenna near overhead power lines or any other power circuit. Do not touch any power line or power circuit. Doing so
may cause severe physical injury or possibly death.
WARNING – Liquid: Avoiding Electrical Shocks
Do not operate the Component if liquid of any kind is spilled onto or inside the unit. Do not operate the Component near rain or water
that’s spilled or contained (e.g., bathtub, kitchen, or sink).
WARNING – Power Cord Safety
When routing the Component’s AC power cord, do not place it near heavy foot trafc areas (e.g., hallways, doorways, and oors). Do
not create a trip hazard with the power cord.
If the power cord’s protective jacket begins to rip or fray, exposing the internal wiring, shielding, etc., disconnect it from the AC power
source and discontinue use of the Component immediately. See the Warranty Information section of this owner’s manual for important
details.
WARNING – No User Serviceable Parts Inside
If, for any reason, the Component is not operating properly, do not remove any part of the unit (cover, etc.) for repair. Unplug the unit
and consult the Warranty Information section of this owner’s manual for important details.
CAUTION – Exposure To Heat
Do not expose the Component to direct sunlight or place it near wall heaters, space heaters, or any enclosed space prone to
temperature increase.
CAUTION – Proper Cleaning
In general, the only cleaning necessary for the Component is a light dusting. Unplug the Component from the wall outlet before
cleaning it. Do not use any type of liquid or aerosol cleaners.
CAUTION – Earthing
Component should be installed by certied service personnel to ensure that the product is connected to a socket-outlet with a
protective earthing connection.

WATTBOX™ WB-200VB-IPCE-6 Owners Manual
pg.7
© 2014 WattBox™
TROUBLESHOOTING
Symptom Possible Cause Remedy
Wattbox™ is not receiving power. Wattbox™ is not turned On. • Turn Wattbox™ switch on.
Make sure AC power plug is plugged
into a properly grounded 120 volts
(nominal) wall outlet.
• In some households, a wall switch
may need to be turned on to make
the wall outlet active. Try turning on
the light switches located near the
wall outlet.
Too many devices are connected, causing
an overload, tripping the Thermal Circuit
Breaker.
• Turn WattBox™ power switch OFF,
then return it to the RESET position.
• If the circuit breaker continues to trip,
try moving one or more components
to another Wattbox™. Too much
current may be drawing through one
Wattbox™.
Component is not receiving power. Component is plugged into a controlled outlet
and the outlet is off.
• Log into WattBox™interface to turn
the outlet On
Component is plugged into a controlled
outlet, but power on the component is not
On. In some instances, a component plugged
into a switched outlet won’t receive power
when Wattbox™is turned On unless the
component power is also switched On.
• Turn the component power On.
Speakers emit a humming or buzzing noise. Wattbox™is sharing AC power with
equipment that is not properly grounded.
• Connect Wattbox™to a dedicated
outlet.
• Try unplugging different components
from the Wattbox™one at a time to
see if the noise stops.
Contacting Technical Support - Phone: [phone] - Email: [e-mail]

pg.8
WATTBOX™ WB-200VB-IPCE-6 Owners Manual
Outlets
Type NEMA 5-15
Number of Outlets 6
Always On 2 Outlets
IP Controlled 4 Outlets (2 Banks of 2)
AC Power
Line Voltage 120V, 60Hz
AC Input Connection IEC C-14
Power Cord Length (1) 4 Foot with 360° Rotating Flat Plug
(2) 6 in. (for use when mounted in enclosure)
Circuit Breaker Rating 15A
UL Current Rating 12A
Voltage Protection Rating (UL 1449 3rd Edition) 500V
Joule Rating 2160 Joules
Surge Component Ceramic Encased MOV
Protection Modes L-N, L-G, N-G
Peak Impulse Current 48,000A
Disconnect Circuitry Yes
Thermal Fuse Yes
EMI / RFI Noise Filtration
All Outlets 53dB, 1kHz to 1MHz
Cable / Satellite Circuit
Connections Gold Plated “F” Connector
Quantity 2 (1 Input and 1 Output)
Surge Component Gas Tube
Clipping Voltage 600V
Frequency Range 0MHz - 3.0GHz
Insertion Loss < 0.5dB
Shielded Yes
Bi-directional Yes
Phone / LAN Circuit
Jacks RJ45
Accepts RJ11 & RJ45
Quantity 2 (1 Input and 1 Output)
Surge Component Sidactor & MOV
Clipping Voltage RJ11:400V; RJ45:250V
Wires Protected 8 Wires
Operating Temperature Range 14 to 104°F (-10 to +40°C)
UL Certications UL 60950-1, UL 1449, UL 498
UL 497A/B, UL 1283
Dimensions 7.9”W x 2.7”H x 6.3”D (w/o brackets)
Connected Equipment Warranty $25,000
SPECIFICATIONS

WATTBOX™ WB-200VB-IPCE-6 Owners Manual
pg.9
© 2014 WattBox™
WARRANTY
5-Year Limited Warranty
This SnapAV® product has a 5-Year Limited Product Warranty and a 5-Year Network Connectivity Warranty. The 5-Year Limited Product
Warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions
of use. This warranty shall not apply to products which have been abused, modied, or disassembled. Products to be repaired under
this warranty must be returned to SnapAV or a designated service center with prior notication and an assigned return authorization
number (RA).
5-Year Replacement Policy
Valid only in the United States and Canada. If your SnapAV surge protector becomes damaged while protecting your connected
equipment, you may request an equivalent replacement to the latest technology of that product category. Keep a copy of the original
invoice to verify the date of purchase the by the original buyer.
Warning Notice
WARRANTY LIMITATION FOR INTERNET PURCHASERS:
SnapAV products purchased outside of the SnapAV internet website do not carry a valid Connected Equipment Protection Policy unless
purchased from an Authorized SnapAV Dealer.
CAUTION: Audio/Video, computer and/or telephone system installations can be very complex systems, which consist of many
interconnected components. Due to the nature of electricity and surges, a single protector may not be able to completely protect
complex installations. In those cases, a systemic approach using multiple protectors must be employed. Systemic protection requires
professional design. AC power, satellite cables, CATV cables, or telephone/network lines entering the system that do not pass through
this surge protector will render the SnapAV connected equipment protection policy null and void. For additional information on how to
protect your system, please contact SnapAV before connecting your equipment to the surge protector.
SnapAV Surge Protector Connected Equipment Protection Policy
Valid only in the United States and Canada. It is the policy of SnapAV that it will, in its sole discretion, replace, pay to replace at fair
market value, or pay to repair, up to the dollar amount specied, equipment that is damaged by an AC power, cable, telephone, or
lightning surge while connected to a properly installed SnapAV surge protector. SnapAV must determine that the surge protector shows
signs of surge damage or is operating outside of design specications, relative to its surge protection capability, and under all of the
circumstances failed to protect your connected equipment.
THIS POLICY IS SUBJECT TO THE CONDITIONS BELOW:
1. PROOF OF PURCHASE REQUIRED:
SnapAV’s connected equipment policy extends to the original purchaser of the SnapAV product only and is non-transferable.
Original purchase receipts must accompany any product return or claim for connected equipment damage.
2. PROPER INSTALLATION:
SnapAV AC protectors must be directly plugged into a properly grounded 3-wire AC outlet. Extension cords, non-grounded two prong
adapters, or other non-SnapAV surge products must not be used. Building wiring and other connections to protected equipment must
conform to applicable codes (NEC or CEC). No other ground wires or ground connections may be used. All wires (e.g., AC power lines,
telephone lines, signal/data lines, coaxial cable, etc.) leading into the protected equipment must rst pass through a single SnapAV
protector designed for the particular application. The protector and the equipment to be protected must be indoors in a dry location, and
in the same building. SnapAV installation instructions and diagrams must be followed.
3. NOTIFICATION:
You must notify SnapAV within fourteen days of any event precipitating a request for product replacement or payment for connected
equipment damage. A return authorization (RA) number must rst be obtained from the SnapAV Customer Service Department at www.
snapav.com/support before returning the protector to SnapAV. At this time, you must notify SnapAV if you believe you have a claim for
damaged connected equipment.
Once you obtain an RA number, please mark the number on the bottom of the unit and pack it in a shipping carton/box with enough
packing material to protect it during transit. The RA number must also be clearly marked on the outside of the carton. Ship the unit to
SnapAV. Please note that you are responsible for any and all charges related to shipping the unit to SnapAV.

pg.10
WATTBOX™ WB-200VB-IPCE-6 Owners Manual
If connected equipment damage was indicated on your RA request, SnapAV will request the make and model of all connected
equipment, a connection diagram of your system, as well as other requests based on the extent of the request for product placement or
payment for connected equipment damage. All requests by SnapAV are to be completed and returned within 30 days. Be sure to note
its conguration before disconnecting your equipment.
4. DETERMINATION OF FAILURE:
SnapAV will evaluate the protector for surge damage. The protector must show signs of surge damage or must be performing outside
of design specications relative to its surge protection capability. Opening the enclosure, tampering with, or modifying the unit in any
way shall be grounds for an automatic denial of your request for payment. SnapAV, after evaluating all information provided, shall, in its
sole discretion, determine whether or not your request is eligible for payment.
If the surge protector shows no signs of AC power or signal line surge damage and is working within design specications, SnapAV will
return the unit to you explaining the test results and notifying you of the rejection of your claim. SnapAV reserves the right to inspect
the damaged connected equipment, parts, or circuit boards. SnapAV also reserves the right to inspect the customer’s facility. Damaged
equipment deemed uneconomical to repair must remain available for inspection by SnapAV until the claim is nalized.
5. REQUEST PAYMENTS:
Once SnapAV has determined that you are entitled to compensation, SnapAV will, at its election, pay you the present fair market
value of the damaged equipment, or pay for the cost of the repair, or send you replacement equipment, or pay the equivalence of
replacement equipment.
6. OTHER INSURANCE/WARRANTIES:
This coverage is secondary to any existing manufacturer’s warranty, implied or expressed, or any insurance and/or service contract that
may cover the loss.
7. EXCLUSIONS:
THE SNAPAV SURGE PROTECTOR EQUIPMENT POLICY DOES NOT APPLY TO: Service charges, installation costs, reinstallation
costs; setup cost; diagnostic charges; periodic checkups; routine maintenance; loss of use of the product; costs or expenses arising out
of reprogramming or loss of programming and/or data; shipping charges or fees; service calls; loss or damage occasioned by re, theft,
ood, wind, accident, abuse or misuse; and products subject to manufacturer’s recall or similar event.
8. DISPUTE RESOLUTION:
Any controversy or claim arising out of or relating to SnapAV’s Surge Protector Equipment Policy, or the alleged breach thereof, shall
be settled by arbitration administered by the American Arbitration Association under its Commercial Arbitration Rules. You may le
for arbitration at any AAA location in the United States upon the payment of the applicable ling fee. The arbitration will be conducted
before a single arbitrator, and will be limited solely to the dispute or controversy between you and SnapAV. The arbitration shall be held
in any mutually agreed upon location in person, by telephone, or online.
Any decision rendered in such arbitration proceedings will be nal and binding on each of the parties, and judgment may be entered
thereon in a court of competent jurisdiction. The arbitrator shall not award either party special, exemplary, consequential, punitive,
incidental or indirect damages, or attorney’s fees. The parties will share the costs of arbitration (including the arbitrator’s fees, if any) in
the proportion that the nal award bears to the amount of the initial claim.
9. GENERAL
If you have any questions regarding the product warranty or the connected equipment protection policy, please contact the SnapAV
Customer Service Department at www.snapav.com/support. This warranty supersedes all previous warranties. This is the only warranty
provided with the protector and any other implied or expressed warranties are nonexistent. This warranty may not be modied except in
writing, signed by an ofcer of the SnapAV Corporation.
CONTACTING TECHNICAL SUPPORT
Phone: [phone] - Email: [e-mail]

WATTBOX™ WB-200VB-IPCE-6 Owners Manual
pg.11
© 2014 WattBox™

140902-1455
© 2014 Wattbox™