Snapper 19300-2 User manual

Parts Manual fo
r
Revision 3,
19" WALK-BEHIND MOWERS
SERIES 0, 1, 3, & 5
COPYRIGHT
©
2005
McDonough, GA, 30253 U.S.A.
TP 400-5101-3-WB-N
9/20/2005 Manual No. 7006031
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
MODEL
19300
19300-
2
19301-
2
19301D
19301D-2
19301
T
19303
19303-
2
19303-2
T
19303B
19303D
19303D-2
19303D-2
T
19303DB
19305-2
T
19305B
19305DB
G19355

Table Of Content
s
TP 400-5101-3-WB-N
Manual No. 700603119" WALK-BEHIND MOWERS
SERIES 0, 1, 3, & 5 3
PAGE GROUP
4Upper & Middle Handles & Controls - Series 0, 1 & 3
6Upper & Middle Handles & Controls - Series 5
8Lower Handles (19300, 19301 Series)
10 Lower Handles - Series 3 & 5
12 Cutting Deck, Blade, Interlock
14 Wheels, Guard, Axles
16 Accessory - Side Chute, Adapter, Grass Catcher - Series 0 & 1
18 Accessory - Grass Bag
20 Accessory - Mulcherizer
22 Decals

Upper & Middle Handles & Controls - Series 0, 1 & 3
TP 400-5101-3-WB-N
Manual No. 7006031 19" WALK-BEHIND MOWERS
SERIES 0, 1, 3, & 5
4

Upper & Middle Handles & Controls - Series 0, 1 & 3
Footnotes:
TP 400-5101-3-WB-N
Manual No. 700603119" WALK-BEHIND MOWERS
SERIES 0, 1, 3, & 5 5
Part No Descri
p
tionItem Qt
y
Note
1 7036153 HANDLE, Upper (19303 Series). ('86 & '87
Models)
7036029 HANDLE, Upper (19300, 19301 Series). ('85 &
'Earlier Models)
2 7014343 2 BUSHING
3 14310 DECAL, Blade Controls
4 7019714 CONTROL, Blade
5 7033904 CLIP (Left Hand-Tecumseh, Right Hand-Briggs) Was 32244
6 7014305 CABLE, Control (Briggs)
7014306 CABLE, Control (Tecumseh)
7 7090898 SCREW, #10-32 x 1/4" Hex Sems (Tecumseh)
7090816 SCREW, #10-32 x 3/8" Hex Head Cap (Briggs)
8 7036037 HANDLE, Middle (See "Lower Handles (19300,
19301)" ill. & parts list for 19300
& 19301 Series)
9 7090095 2 NUT, 1/4-28 Hex
10 7090053 2 WASHER, 1/4" Internal Tooth Lock
11 7090529 2 SCREW, 1/4-28 x 1-1/4" Hex Head Cap, Grade 5
12 7023813 3 CLIP Was 14374
These 19303 Series Handles Are Required For Kwik-N-Ezy Grass Catchers
For 19300 & 19301 Series Handles Use Grass Catcher Found On "Accessory - Side Chute, Adapter, Grass Catcher"
illustration and parts list

Upper & Middle Handles & Controls - Series 5
TP 400-5101-3-WB-N
Manual No. 7006031 19" WALK-BEHIND MOWERS
SERIES 0, 1, 3, & 5
6

Upper & Middle Handles & Controls - Series 5
Footnotes:
TP 400-5101-3-WB-N
Manual No. 700603119" WALK-BEHIND MOWERS
SERIES 0, 1, 3, & 5 7
Part No Descri
p
tionItem Qt
y
Note
1 7036204 HANDLE, Upper Was 36198 (19303 Series)('88 &
Later Models)
2 7036202 HANDLE, Middle (19303 Series)('88 & Later
Models)
3 7019714 CONTROL, Blade
4 7033904 CLIP (Left Hand-Tecumseh, Right Hand-Briggs) Was 32560
5 7014305 CABLE, Control (Briggs & Stratton)
7014306 CABLE, Control (Tecumseh)
6 7014343 2 BUSHING
7 7023813 3 CLIP Was 14374
8 7015693 2 NUT, 1/4-20 Wing
9 7090965 2 SCREW, 1/4-20x1-3/8" Curved Head
10 14310 DECAL, Blade Control
11 7090898 SCREW, #10-32x1/4" Hex Sems (Tec.)
7090816 SCREW, #10-32x3/8" Hex Head Cap (B&S)

Lower Handles (19300, 19301 Series)
TP 400-5101-3-WB-N
Manual No. 7006031 19" WALK-BEHIND MOWERS
SERIES 0, 1, 3, & 5
8

Lower Handles (19300, 19301 Series)
Footnotes:
TP 400-5101-3-WB-N
Manual No. 700603119" WALK-BEHIND MOWERS
SERIES 0, 1, 3, & 5 9
Part No Descri
p
tionItem Qt
y
Note
1 7039746 HANDLE, Lower ('85 & Earlier). (19300, 19301
Series)
2 7015693 2 NUT, 1/4-20 Wing Was 14207
3 7090015 2 BOLT, 1/4-20 x 1-3/4" Square Neck Carriage
4 7091303 2 BOLT, 5/16-18 x 1" Short Neck Carriage, Grade 5 Was 90383
5 7090189 2 WASHER, 5/16" Internal/External Tooth Lock
6 7090188 2 WASHER, 5/16" Flat
7 7090187 2 WASHER, 5/16 Split Lock
8 7091511 2 NUT, 5/16-18 Hex Was 90196
9 7090534 2 SCREW, 5/16-18 x 1/2" Hex head Cap, Grade 2 Was 90203
10 7090388 2 T-NUT, 5/16-18
11 7023813 3 CLIP Was 14374

Lower Handles - Series 3 & 5
TP 400-5101-3-WB-N
Manual No. 7006031 19" WALK-BEHIND MOWERS
SERIES 0, 1, 3, & 5
10