Snapper DLW359T User manual

Parts Manual fo
r
Revision 1,
19" LIGHT WEIGHT
(
STANDARD & OPP
)
SERIES 9
COPYRIGHT
©
2005
McDonough, GA, 30253 U.S.A.
TP 400-5096-1-WB-N
9/16/2005 Manual No. 7006039
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
WALK BEHIND MOWERS
MODEL
DLW359
T
DLW409R2
LW359
T
LW359T2
ODLW309
T
RLW359
T

Table Of Content
s
TP 400-5096-1-WB-N
Manual No. 700603919" LIGHT WEIGHT (STANDARD & OPP)
SERIES 9 3
PAGE GROUP
4Handles & Controls
6Cutting Deck, Blade, Interlock
8Cutting Deck, Blade, Interlock (OPP Models Only)
10 Wheels, Guards, Axles
12 Wheels, Guards, Axles (OPP Models Only)
14 Decals
16 Accessory - Grass Bag
18 Accessory - Side Chute, Adapter
20 Accessory - Recycling Kits
22 Accessory - Snapperizer

Handles & Controls
TP 400-5096-1-WB-N
Manual No. 7006039 19" LIGHT WEIGHT (STANDARD & OPP)
SERIES 9
4

Handles & Controls
Footnotes:
TP 400-5096-1-WB-N
Manual No. 700603919" LIGHT WEIGHT (STANDARD & OPP)
SERIES 9 5
Part No Descri
p
tionItem Qt
y
Note
1 7074384 HANDLE, Upper Was 33473
7033477 HANDLE, Upper Was 33474 (For OPP Models
Only)
2 7036350 HANDLE, Middle
7033406 HANDLE, Middle (For OPP Models Only)
3 7033985 HANDLE, Lower Left Hand Was 38469
4 7033986 HANDLE, Lower Right Hand Was 38468
5 7017072 CONTROL, Blade
6 7033904 CLIP, Blade Control Was 32829
7 7022379 CABLE, Blade Control (Tecumseh 4-Cycle)
7024143 CABLE, Blade Control (Tecumseh 2-Cycle)
7027475 CABLE, Blade Control (Robin 2-Cycle) Was 24146
8 7014343 BUSHING
9 7023813 CLIP, Wiring Harness
10 7022550 CONTROL, Throttle (Tecumseh)
7024140 CONTROL, Throttle (Robin)
11 7090095 NUT, 1/4-28 Hex Was 91024
12 7016544 2 PLUG (For OPP Models Only)
13 7023735 4 KNOB, 5/16-18
14 7091013 4 SCREW, 5/16-18 x 2" Curved Head
15 7024088 DECAL, Blade Control
16 7090898 SCREW, #10-32 x 5/16" Sems
17 7090799 4 BOLT, 5/16-18 x 5/8" Short Neck Carriage Was 91026
18 7091601 4 NUT, 5/16-18 Hex Flange Lock Was 91070
19 7091022 SCREW, 1/4-28 x 1-3/4" Hex Head Cap
20 7090053 WASHER, 1/4 Internal Tooth Lock Was 91023
21 7090391 WASHER, 5/16 Internal Tooth Lock Was 91068

Cutting Deck, Blade, Interlock
TP 400-5096-1-WB-N
Manual No. 7006039 19" LIGHT WEIGHT (STANDARD & OPP)
SERIES 9
6

Cutting Deck, Blade, Interlock
Footnotes:
TP 400-5096-1-WB-N
Manual No. 700603919" LIGHT WEIGHT (STANDARD & OPP)
SERIES 9 7
Part No Descri
p
tionItem Qt
y
Note
1 7057662 DECK, Mower Was 47972 (Includes painted
deck with decals)
2 7019795 BLADE, Cutter
7017167 BLADE, Cutter (For Recycling Models Only)
3 7090167 SCREW, 3/8-24 x 2" Hex Head Cap (Gr. 5)
4 7012063 WASHER, Cone
5 7010783 KEY, Hi-Pro (Tecumseh 2-Cycle)
6 7012927 HUB, Blade Drive (Tecumseh 2-Cycle)
7015626 HUB, Drive Blade (Tecumseh 4-Cycle & Robin 2-Cycle)
7 7033408 SPRING, Interlock
8 7012048 INSULATOR, Interlock
9 7090385 WASHER, #8 Tab
10 7090379 SCREW, #8-18 x 3/4" Self-Tapping
11 7090071 SCREW, 1/4-20 x 3/4" Hex Flange Lock
12 7091584 2 NUT, 1/4-20 Hex Flange Was 90583
13 7090595 3 BOLT, 5/16-18 x 3/4" Hex Flange Lock
14 7091601 3 NUT, 5/16-18 Hex Flange Lock Was 90585
15 7011762 COVER, Spark Plug (Not Shown)
16 7090324 2 SCREW, 3/8-16 x 1" Self-Tapping

Cutting Deck, Blade, Interlock (OPP Models Only)
TP 400-5096-1-WB-N
Manual No. 7006039 19" LIGHT WEIGHT (STANDARD & OPP)
SERIES 9
8

Cutting Deck, Blade, Interlock (OPP Models Only)
Footnotes:
TP 400-5096-1-WB-N
Manual No. 700603919" LIGHT WEIGHT (STANDARD & OPP)
SERIES 9 9
Part No Descri
p
tionItem Qt
y
Note
1 7057662 DECK, Mower Was 52502 (Includes painted
deck with decals)
2 7022396 BLADE, Cutter
3 7090167 SCREW, 3/8-24 x 2" Hex Head Cap (Gr. 5)
4 7012063 WASHER, Cone
5 7022390 HUB, Blade Drive (Tecumseh 2-Cycle)
6 7033408 SPRING, Interlock
7 7012048 INSULATOR, Interlock
8 7090385 WASHER, #8 Tab
9 7090379 SCREW, #8-18 x 3/4" Self-Tapping
10 7090071 2 SCREW, 1/4-20 x 1/2" Hex Head Cap Was 91145
11 7091584 2 NUT, 1/4-20 Hex Flange Was 91065
12 7090324 3 SCREW, 3/8-16 x 1" Self-Tapping
13 7011762 COVER, Spark Plug (Not Shown)

Wheels, Guards, Axles
TP 400-5096-1-WB-N
Manual No. 7006039 19" LIGHT WEIGHT (STANDARD & OPP)
SERIES 9
10