Sodex Sport S25332 User manual

DESCRIPTION
Aluminium Structure
Powder coated
CONFORM
International regulation
ASSEMBLY INSTRUCTIONS
TENNIS UMPIRE CHAIR
PRODUCT REF :S25332 UNIT
ASSEMBLY TIME
The assembly time for tennis umpire chair is estimated at 60 minutes with 1 people.
MAINTENANCE
The equipment has to be regularly maintained by the owner. It is recommended to:
- Check every week that all the bolts are correctly tightened
- Fix paint defects if the unit has been damaged, using the adapted paint specified by the
manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
WARRANTY
One full year parts and labour guarantee. Every claim regarding the condition of the delivered equipment
has to be done within the warranty period following receipt of the product.
The warranty will not apply to:
- Any degradation during transport.
- Any degradation due to poor maintenance.
- Any degradation due to use differing from which the product was intended.
- Any defect claimed after the end of the warranty period.
- Any damage due to a faulty installation or assembly of the product.

2
ASSEMBLY
NECESSARY
ITEMS
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
1- ASSEMBLY OF THE FEET TO THE HORIZONTAL FRAME AND TO THE SEAT SUPPORT
Wrench 17mm
Part-thread SS
screws M10x55
+ SS Washers 10
+ SS locknut M10
PVC swivel feet M10
+ Rubber protection
Screwdriver
x4
PVC swivel feet
M10
x4
Rubber protection
x2
PVC swivel feet
M10
x2
Rubber protection
x1
Fixing lug
x2
SS Screws
M10x50
x22
SS Washers 10
x8
SS Locknut
M10
x2
Screw M5x15
x8
SS Washers 10
x2
SS Locknut
M10
x6
Part-thread SS
screws M10x55
x6
Part-thread SS
screws M10x50
Part-thread SS
screws M10x50
+ SS Washers 10
x2
Part-thread SS
screws M10x55
x4
Part-thread SS
screws M10x50
x2
Clip plastic PVC
x4
Srews M5x15

3
ASSEMBLY
NECESSARY
ITEMS
2– ASSEMBLY OF THE LADDER
PVC swivel feet M10
+ Rubber protection
x2
PVC swivel feet
M10
x2
Rubber protection
x10
SS Washers 10
x4
SS Locknut
M10
x4
Part-thread SS
screws M10x55
x2
Part-thread SS
screws M10x50
Part-thread SS
screws M10x55
+ SS Washers 10
+ SS locknuts M10
Part-thread SS
screws M10x50
+ SS Washers 10

4
ASSEMBLY
3– SEAT FIXATION
NECESSARY
ITEMS
SS Screws M10x50 +
SS Washers 10 +
SS Lock nut M10
4– ASSEMBLY OF THE DESK
NECESSARY
ITEMS
x2
Clip plastic PVC
It’s possible to choose the orientation of the desk, so we can place either the red
side upwards or the white side. If you want to place the red side upwards, fix the
PVC hook on the other side (white)n using the self-tapping screws, respecting the
dimensions above.
x2
SS Srews
M10x50
x4
SS Washers 10
x2
SS Locknut
M10
x4
Srews M5x15

5
5 – ASSEMBLY OF THE FIXING LUG
NECESSARY
ITEMS
Screws M5x15
x1
Fixing lug
ASSEMBLY
x2
Screw M5x15

NOMENCLATURE
Package
N° Ref Index Designation Description Quantity Packing method Weight (kg)
Dim.
(mm)
A1
S25332-01 CLadder 1
Plastic bubbles +
cardboard 5 layers 22 2020x560x210
S25332-02 BSeat support 1
S25332-03 CRear feet 2
S25332-04a CHorizontal frame 1
S25332-04b CBack bar 1
S25332-05 BArm rest 2
S25332-06 ADesk 1
A2 S35402 ASeat 1Plastic bubble 2500x510x350
ACCESSORIES PUT IN CLEAR PVC BAG
Package
N° Ref Designation Description Qty Note
A1 BITI1050 +
LITA102220
Part-thread SS screws
M10x50 +
SS washers 10
6+ 6 To fix the horizontal
frame
A1
BITI1055 +
LITA102220 +
TITD10
Part-thread SS screws
M10x55 +
SS washers 10
+ SS locknut M10
6 + 12 + 6 To fix the seat sup-
port
A1
BITH1050 +
LITA102220 +
TITD10
SS screws M10x50
+ SS washers 10
+ SS locknut M10
2 + 4 + 2 To fix the seat
A1 VTKK0515 Screws M5x15 2To fix the desk
A1 CV1060X PVC swivel feet M10 4To be fixed under the
feet
A1 NCCG Rubber protection 4To be fixed under the
feet
A1 Fixing lug 1To be fixed on the
desk
A1 CSN34 Clip plastic PVC 2To be fixed on the
desk
A1 VITN0515 Screws M5x15 4To be fixed on the
desk
PACKING LIST
TENNIS UMPIRE CHAIR
PRODUCT REF S25332 Index E UNIT

PRE-ASSEMBLED ACCESSORIES
Package
N° Ref Designation Description Qty Note
A1 S76640 Reinforced coat peg 2
Assembly the
reinforced coat peg to
the back frame
A1 NNHOM3060 Alu cap 30x60 4Assembly to the chair
A1 VTKF0325 Selt-tapping screws
M3.5x25 4
Assembly the
reinforced coat peg to
the back frame
A1 TRBR10 6Fix to the cross frame Rivet nut BC M10
VISA PACKING DEPARTMENT
a
DATE :
PACKING LIST
TENNIS UMPIRE CHAIR
PRODUCT REF S25332 Index E UNIT