SODEX S30052W User manual

DETAILS
SODEX INTERNATIONAL
18 rue de l’avenir – Bât. 224
14650 CARPIQUET
Tel. : [phone]
Email: [email protected]
DESCRIPTION
Steel structure D90
Powder Coated
CONFORM
European norm
NF EN 1271
ASSEMBLY INSTRUCTIONS
VOLLEYBALL POSTS, MOBILE,
TENSION BY CAPSTAN
PRODUCT REF :S30052W PAIR
ASSEMBLY TIME
The time to make the assembly of this volleyball post is estimated for 1 person, at 35minutes. (without filling the
counterweights).
MAINTENANCE
Equipment must be maintained regularly by the owner, it is recommended for good functionning to :
- Check fasteners every week to insure tighteness.
- Repaint on positions prone to impacts, with coloured paint specified by sodex international.
- All damaged parts must be immediately replaced with a spare part specific to this product specified by sodex inter-
national.
WARRANTY
One full year parts and labor guarantee. Every claim regarding the condition of the delivered equipment has to be
done within the legal period,of the reception of the material.
The warranty will not apply to:
- All degradation during the transport.
- All degradation due to poor maintenance.
- All degradation due to use differing from which was intended
- Any defect claimed after the end of the legal period.
- Any damage due to a faulty installation or assembly of the module
THIS MATERIAL HAS BEEN BUILT AND DESIGNED ACCORDING TO THE FRENCH AND EUROPEAN STANDARD EN-NF 1271
Note: We recommend that the distance between two
pillars should not exceed 9.5m

2
MONTAGE
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
Wrench 17 Phillips Screwdriver
GUIDING TO SAND (x2)
Screws M5x15
X16
Screws M5x15
STEP 1:
Open the caps and fill sand into the counterweight
STEP 2:
Close the caps

3
MONTAGE
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
Wrench 17
x8
Waherss M10
NECESSARY
ITEMS
1- ASSEMBLAGE OF BASE AND COUNTERWEIGHT WITH WHEELS (x2)
x1
Capstan + hook S
x2
Turn-knob M10X20
x4
Turn-knob M8X20
x4
Peg
Turn-knob M10X20
Counterweight with
wheels
Base
x1
Turn-knob M10
x8
ScrewsM10x30
Phillips Screwdriver

4
MONTAGE
NECESSARY
ITEMS
2- ASSEMBLAGE COUNTERWEIGHT ON POST (x2)
Upper part of post
Lower part of post
Screws BC M10x30 +
washers M10
Do the same with the other post
x4
Waherss M10
x4
ScrewsM10x30

5
MONTAGE
3- ASSEMBLAGE OF SECOND COUNTERWEIGHT (x2)
NECESSARY
ITEMS
Peg
4 – NET TENSION
NECESSARY
ITEMS
Fix the net cord
to the U hook
Fix the net cord to the
S hook
STEP 1 STEP 2
Adjust the height of net by taking the PVC turn-knob and
pull it downwards. When the net is at the right height, roll the
cord around the hook (at least 4 times) to block it
x2
Turn-knob M8X20
x2
Peg
x1
Capstan +
stainless steel hook

NOMENCLATURE
Package
N° Ref Index Designation Description Quantity Packing Method Weight (kg) Dim. (mm)
A1 S30052W-
011 D2 Upper parts 2 Lower parts 2 + 2 plastic buble+ Carton 5 layers 23 1530x200x180
A2 S30052W-
041 BBase 2Carton 2 layers + plastic buble 5.6 510x500x100
A3 S30052W-
042 ACounterweight with wheels 1Carton 2 layers + plastic buble 9520x380x150
A4 S30052W-05 BSecond counterweight 1Carton 2 layers
+ plastic buble 8.5 520x200x150
A5 S30052W-
042 ACounterweight with wheels 1Carton 2 layers + plastic buble 9520x380x150
A6 S30052W-05 BSecond counterweight 1Carton 2 layers
+ plastic buble 8.5 520x200x150
ACCESSORIES IN CLEAR PVC BAG 1
Package
N° Designation Description Qty Note
A1 Screws BC M10x30 +
Washers 10 8 + 8 Assemble posts on base
A1 Capstan + hook “S”,
inox D5, Lg 106mm 1 + 1 Assemble on post
A1 Nylon cord D6 3m lg
+ Turn knob M10 1 + 1 Assemble on post
ACCESSORIES IN CLEAR PVC BAG 2
Package
N° Designation Description Qty Note
A2 Peg 4Assemble the two
counterweights
A2 Turn knob M10x20 2Fix the counter-
weights to the bases
A2 Turn knob M8x20 4Fix the pegs to the
counterweights
VISA SERVICE EMBALLAGE
DATE :
PACKING LIST
VOLLEYBALL MOBILE POSTS
TENSION BY CAPSTAN
PRODUCT REF S30052W Index H PAIR

PRE-ASSEMBLED ACCESSORIES
Package
N° Designation Description Qty Note
A1 Slip ring for tube
D76/60 2Assemble the upper & lower parts
A1 2 locking bolts Ø10 + 2 SS chains + 2 SS
rings
2 + 2 + 2 Assembled on upper
part
A1 Alu pulley D30 2Assembled on sup-
port pulley
A1 Screws BC M10x30 +
Washers M10 + Lock
nuts M10
2 + 4 + 2 Assembled on sup-
port pulley
A2 PVC cap D34 4Assembled on base
A3+A4
A5+A6 Screws M5x10 16 Assembled on coun- terweight
A3+A5 PVC wheel D65 +
screw bolt M8x60+
washer 8 + nut M8
4 + 4 + 8 + 4 Assembled on coun-
terweight with wheels
A3+A4
A5+A6 Rubber 3mm 8Paste on Second counterweight
A3+A4
A5+A6 Rubber U lg 480 mm 4Put at the end on the counterweight
VISA PACKING DEPARTMENT DATE :
PACKING LIST
VOLLEYBALL MOBILE POSTS
TENSION BY CAPSTAN
PRODUCT REF S30052W Index H PAIR