Sodura Aero Toddler Bed User manual

Insert one of the mattress supports into
the slot of one of the side-rails.
Attach the headboard by aligning the
holes of the side-rail with the holes on the
edge of the headboard. Make sure the
mattress support fits into the groove of
the headboard. Loosely insert the
screws into the barrel nuts which go into
the corresponding hole on the
headboard. Do not completely tighten
the screws. Repeat for the footboard.
Then slide the second mattress support
into the grooves of headboard and
footboard.
Assembly Instructions For Aero Toddler Bed
For assembly help or replacement parts, please email [email protected]
Parts Bolt and Barrel Nut Closeup
(2 pcs)
Right Side Rail -
- Left Side Rail
Footboard -
Joint Connector Bolts
and Barrel Nuts (8 ea)
- Headboard
Mattress Supports
(2 pcs)
Assembly Steps

WARNING :
ADULT ASSEMBLY REQUIRED
Product must be assembled by an adult before use.
Failure to follow these warnings and the assembly instructions could result in serious
injury or death from entrapment or strangulation.
DO NOT place bed near windows where cords from blinds or drapes may strangle child.
DO NOT use without guardrails.
DO NOT place items with a string, cord, or ribbon around child’s neck, such as hood
strings or pacifier cords.
DO NOT suspend strings over a toddler bed for any reason.
MAINTENANCE
We design our furniture to be low maintenance; however misuse, irregular use, or improper assembly can
result in product malfunction. Regularly check the stability. If pieces feel loose or wobbly tighten all screws
immediately. Regularly check screws to ensure that none are loose or are coming loose. If so, tighten
immediately. Use only provided hardware to assemble and maintain assembly.
AGE REQUIREMENTS
Toddler bed is for children ages 15 months – 6 years.
Toddler bed has a maximum weight limit of 300 lbs.
MATTRESS SIZE
Mattress intended for use on the bed shall be a full-size crib mattress having the minimum dimensions: 51
5/8 in. (1310 mm) in length and 27 ¼ in. (690 mm) in width and thickness of 4 in. (100 mm) or a greater
thickness as specified by the manufacture.
CLEANING
To clean use a soft, lint free rag similar to a cloth diaper and wipe away dust regularly. If necessary dampen
cloth slightly with warm water and gently rub away spots. Dry thoroughly.
Do not use a bleach solution.
Do not submerse or allow to lie in standing water. Do not use a sponge or harsh abrasive.
Do not use all purpose cleaners or harsh detergents.
Do not use Pine Oil cleaners or abrasive household cleaners.
Do not use heat or hot water.
Finally, attach the second side-rail by
aligning the groove with the mattress
support edges and aligning the holes on
the edge of the headboard and footboard.
Loosely tighten all screws. Ensure that the
platform is completely in the groove on all
sides and then, fully tighten all screws on
both side-rails. Assembly is now complete.
Use And Care Instructions