Soho 40011 User manual

3 of 5
10-40011-V-01
STEP 1 " ASSEMBLY OF CRIB SIDES"
THIS STEP REQUIRES :
A.Head Board (1 pc)
C.Side Board (2 pcs)
D.Stabilizer Bar (1 pc)
N.Allen key (2 pcs)
F. Allenbolt 2 1/2"(65 mm) (4 pcs) G. Allenbolt 2 3/4"(70 mm) (4 pcs)
W. Spring washer (8 pcs)
L. Nut 3/4" (20mm) (4 pcs) M. Barrel Nut (4 pcs)
STEP 1.2
C
M
D
W
G
N
C
A
STEP 1.1 FACE
INSIDE RIGHT
INSIDE
N
L
W
F
STEP 1.1
- Insert Allenbolt 2 1/2"(65mm) (F), Spring Washer (W) through the top and bottom holes in headboard from the
back side.
- Insert Nut 3/4"(20mm) (L) through the top and bottom holes in Sideboard and connect to the Headboard. Hand
tighten only!
- Repeat STEP 1.1 for other Sideboard.
STEP 1.2
- Insert Barrel nut (M) into holes in Stabilizer Bar.
- Connect Stabilizer Bar to the Sideboard using (4 pcs) Allenbolt 2 3/4"(70 mm) (G), Spring Washer (W) .
- Tighten all Bolts with Allen key (N).