Solera SL-SMFL-10W-40K-BK-G1 User manual

LIGHT EFFICIENT DESIGN HEADQUARTERS 188 S. Northwest Highway •Cary, IL 60013
INNOVATION & MANUFACTURING CENTER 30 Log Bridge Road, Building 200 •Middleton, MA 01949
847.380.3540 •led-llc.com
04.26.22 Information is subject to change without notice.
NOTICE AND WARNING
1. THIS IS A SOLAR POWERED LAMP, PLEASE INSTALL IT IN A LOCATION WHERE IT
CAN GET ENOUGH SUNSHINE.
2. PLEASE NOTE THE LIGHTING TIME DEPENDS ON SUNSHINE DURATION &
WEATHER.
3. PLEASE DO NOT DISASSEMBLE THE LIGHT AS THIS WILL VOID THE WARRANTY.
4. THE LIGHT CONTAINS A LITHIUM BATTERY. PLEASE RECYCLE OR DISPOSE OF
PROPERLY.
5. OVER TIME, BATTERY PERFORMANCE MAY DECLINE. THIS IS NORMAL FOR THIS
TYPE OF PRODUCT AND IS NOT COVERED BY WARRANTY.
PLEASE SEE WEB SITE FOR MORE DETAILS
https://solera-solar.com/
SL-SMFL-10W-40K-BK-G1
SOLAR
LIGHTS
INSTRUCTIONS

LIGHT EFFICIENT DESIGN HEADQUARTERS 188 S. Northwest Highway •Cary, IL 60013
INNOVATION & MANUFACTURING CENTER 30 Log Bridge Road, Building 200 •Middleton, MA 01949
847.380.3540 •led-llc.com
04.26.22 Information is subject to change without notice.
SPECIFICATIONS
SL-SMFL-10W-40K-BK-G1
SOLAR
LIGHTS
INSTRUCTIONS
FEATURES

LIGHT EFFICIENT DESIGN HEADQUARTERS 188 S. Northwest Highway •Cary, IL 60013
INNOVATION & MANUFACTURING CENTER 30 Log Bridge Road, Building 200 •Middleton, MA 01949
847.380.3540 •led-llc.com
04.26.22 Information is subject to change without notice.
MODES
SL-SMFL-10W-40K-BK-G1
SOLAR
LIGHTS
INSTRUCTIONS
Once the lamp body is connected with the solar panel, the lamp will automatically recognize
the Constant Lighting Mode, Sensor Mode or Power Bank function.
MODE A CONSTANT LIGHTING MODE (LAMP NOT CONNECTED WITH SOLAR PANEL)
MODE B: SENSOR MODE (LAMP CONNECTED WITH SOLAR PANEL)
POWER BANK FUNCTION

LIGHT EFFICIENT DESIGN HEADQUARTERS 188 S. Northwest Highway •Cary, IL 60013
INNOVATION & MANUFACTURING CENTER 30 Log Bridge Road, Building 200 •Middleton, MA 01949
847.380.3540 •led-llc.com
04.26.22 Information is subject to change without notice.
INSTALLATION OPTIONS
SL-SMFL-10W-40K-BK-G1
SOLAR
LIGHTS
INSTRUCTIONS
INSTALLATION A: WALL MOUNTED
1. CHECK AND PREPARE LAMP, ACCESSORIES AND TOOLS WELL.
2. DRILL 2 HOLES WITH A DEPTH OF 2IN. AND A HOLE SPACING OF
6.6 IN., THEN FIX SOLAR PANEL ON THE WALL.
3. DRILL 2 HOLES OF 8MM WITH A DEPTH OF 2IN. AND A HOLE SPACING OF
5.2IN., THEN FIX LAMP ON THE WALL.
4. OPEN THE SILICON COVER AT THE BOTTOM OF LAMP, CONNECT THE WIRE OF
SOLAR PANEL TO THE LAMP AND SCREW IT TIGHTLY.
5. ADJUST THE SOLAR PANEL AND LAMP TO THE RIGHT POSITION ACCORDING
LOCAL LATITUDE AND LIGHTING DIRECTION, THEN TURN ON THE LAMP.

LIGHT EFFICIENT DESIGN HEADQUARTERS 188 S. Northwest Highway •Cary, IL 60013
INNOVATION & MANUFACTURING CENTER 30 Log Bridge Road, Building 200 •Middleton, MA 01949
847.380.3540 •led-llc.com
04.26.22 Information is subject to change without notice.
INSTALLATION OPTIONS (CONTINUED)
SL-SMFL-10W-40K-BK-G1
SOLAR
LIGHTS
INSTRUCTIONS
INSTALLATION B: PLACE ON A FLAT SURFACE
PUSH ASIDE THE STAND BRACKET AND PUT IT ON A FLAT SURFACE.
INSTALLATION C: WALL MOUNTED (LIGHT ENGINE ONLY)
1. PLEASE DRILL 2 HOLES ON THE WALL WITH A SPACING OF 3.48IN.
2. FIX THE EXPANSION PLUGS AND SCREWS INTO THE HOLES WITH A SPARE
SPACE (DO NOT LOCK TO THE BOTTOM).
3. PUSH ASIDE THE STAND BRACKET, ALIGN THE HANGING HOLES TO THE
SCREWS AND HANG THE LAMP ON THE WALL.
*THE RECOMMENDED INSTALLATION HEIGHT IS LESS THAN 6 FT.