Solos 33-00016-00 User manual

TM
QUICK START GUIDE AND WARRANTY
www.solos-wearables.com

GETTING STARTED WITH SOLOS
IN THE BOX
Solos glasses, Micro-USB cable, Cloth, Case, Quick Start Guide.

CHARGING LOCATION
To charge your Solos just ip open the tab.
Close it before starting your activity.
CHARGING INDICATOR
The LED provides important device status
information like low battery indication.
The LED will ash green when the unit
is charging and will appear solid green
when fully charged.
CHARGING CONNECTION
Connect +5V Power

If you cannot see the full image left-
right, very gently hold the pupil display
to slide it in and out of the display
housing to suit your eye position.
ADJUST THE DISPLAY ARM
The display arm includes two hinges
to allow you to position the display
comfortably. The side hinge rotates the
entire optics position up and down.
The front hinge adjusts the viewing
position. Hold the display arm and
gently move up and down.
Caution: Do not pull the
optics module outward,
away from the frame.

POWERING ON AND OFF
Press the middle button to power up your
unit. The green light will illuminate briey.
Hold the middle button for >5 seconds to
power o your unit. It will say goodbye
to you.
CARE AND MAINTENANCE
- Avoid storing the device in extreme temperatures for a prolonged period.
- Do not use harsh chemicals, detergents, or cleaners on the unit.
- After use, clean using a microber cloth to remove sweat, water, etc.
- Device contains electronic components, proper disposal required.
TECHNICAL SPECIFICATIONS
Battery Rechargeable 300 mAh Lithium Polymer
Battery Life 5 hours1
Charging (micro USB)25V +.25V / -.6V (USB)
Operating Temperature Range -20 °C – +60 °C
Charging Temperature Range 0 °C – +45 °C
Display WQVGA LCD (16×9)
Connectivity ANT+™, Bluetooth™ Classic and Smart @2.4 GHz
Control 3 Push-button switches
Audio Integrated dual microphones and speakers
1 Depends on operating conditions

2
1
LAUNCH THE APP
DOWNLOAD THE SOLOS APP
Available to download for FREE on the
App Store and Google Play Store.
START THE SOLOS APP
CREATE AN ACCOUNT
FOLLOW SETUP INSTRUCTIONS

Industry Canada Compliance
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme aux RSSs exempts de licence d’Industrie Canada.
Le fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d’interférences; et
(2) Cet appareil doit accepter toute interférence, y compris les interférences
pouvant entraîner un fonctionnement indésirable de l’appareil.
BEFORE YOU USE SOLOS
3
When using Solos always ensure that you keep your eyes focussed on the road
and your surroundings. Solos is designed as to provide “information snacking”,
that is a quick glance for information and you should not spend lengthy periods
looking at the display while in motion. Ensure that you position the display such
that it does not obscure your vision.
Solos should not be used for direct observation of the sun or other bright light
sources. Solos should not be used while driving, and should not be used if your
eld of view is aected or if you cannot see clearly. Solos is not intended to be
used for impact protection in sports or industrial uses, although the lenses do
meet relevant impact resistance safety tests.

FCC Compliance
Section 15.21 requires that in the user manual, the user shall be cautioned that
changes / modications not approved by the responsible party could void the
user’s authority to operate the equipment.
For a Class B digital device or peripheral, the instructions furnished the user
shall include the following or similar statement, placed in a prominent location
in the text of the manual (source):
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The FCC has granted an Equipment Authorization for this model device with
This equipment complies with IC RSS-102 radiation exposure limits set forth for
an uncontrolled environment.
Cet équipement est conforme aux limites d’exposition aux rayonnements
ioniques IC RSS-102 établies pour un environnement non contrôlé.

all reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
Exposure to Radio Frequency Radiation
The radiated output power of the device is below the FCC and Industry Canada
radio frequency exposure limits.
The Product must not be co-located or operating in conjunction with any other
antenna or transmitter.
Any changes or modications made to the device that are not expressly
approved by the manufacturer, may void the user’s authority to use this device.
Exposition au rayonnement radioélectrique
La puissance de sortie rayonnée de l’appareil est inférieure aux limites
d’exposition aux fréquences radioélectriques de la FCC et d’Industrie Canada.
Le Produit ne doit pas être co-situé ou fonctionner en conjonction avec une
autre antenne ou émetteur.
Toute modication ou modication apportée à l’appareil qui n’est pas
expressément approuvée par le fabricant peut annuler l’autorisation d’utiliser
cet appareil.
Battery Disposal and WEEE Information
Solos asks you to ensure the proper disposal, reuse, recycling and recovery of
batteries and Waste Electrical and Electronic Equipment (WEEE). Batteries and
WEEE should not be disposed of in normal domestic waste bins.

or replace the Product as provided under
(i) or (ii), pay a proportionate refund of the
purchase price You paid for the Product
based on Kopin’s good faith estimate of the
portion thereof attributable to Kopin. Where
the Product is repaired or replaced during
the Warranty Period, except as otherwise
prohibited by applicable laws, the warranty
for the repaired or replaced Product, as
applicable, will expire upon the expiration
of the original Warranty Period or thirty
(30) days whichever is longer. Any warranty
service or support under this Limited
Warranty is conditioned upon Your return
of the Product, with free and clear title, to
Kopin or its authorized service provider.
Where there has been a replacement of
the Product, the Product or its parts, as
provided pursuant to the Limited Warranty,
becomes Your property and the Product
being replaced becomes Kopin’s property.
Where there is a refund, You will return the
Product to Kopin and such Product becomes
Kopin’s property. Kopin may condition a
refund or replacement on You returning the
product or require You to provide a credit
card number, which will be charged only if
You fail to return the Product. Exclusions
The Limited Warranty does not apply:
a) to normal wear and tear;
b) if the Product or any of its part is opened,
disassembled, or repaired by someone not
authorized by Kopin;
These terms and conditions apply to your
purchase of any hardware (“the Product”)
manufactured by or for Kopin Display
Corporation (“Kopin”). Any reference in this
Limited Warranty to the term “You” refers to
the original buyer of any Product.
1 Warranty Terms
a) Kopin warrants to You that the Product
will be free from defects in materials and
workmanship under normal and intended
use for one (1) year from the original date of
purchase by You (the “Warranty Period”). The
Limited Warranty is not transferable by You.
All subsequent purchasers acquire the Product
“as is” without benet of this Limited Warranty.
Where You purchased the Product from Kopin’s
website or other online vendors the date of
purchase is the date of the purchase invoice
issued to You by Kopin or such online vendors
by email. Where You purchased the Product
from an authorized reseller at a physical
location, the date of purchase is the date of the
invoice issued to you at the physical location.
b) In the event Kopin determines that the
Product is defective, Kopin may in its
discretion: (i) repair the defective part of the
Product free of charge with new or refurbished
parts; (ii) replace the defective Product with a
comparable new or refurbished product; or (iii)
in the event that Kopin is unable to repair
KOPIN CORPORATION
LIMITED WARRANTY