Solwise HDF-200 User manual

Solwise Ltd
Fitting Connectors on HDF-200 and HDF-400 Cable
Strip the cable*
Put the crimp sleeve onto the cable** and pull the braiding back
Put the pin on the inner core and crimp the pin onto the inner core
Put the crimp plug onto the cable and flatten the braiding over the crimp plug
Pull the crimp sleeve over the crimp plug and crimp the crimp sleeve onto the crimp
plug

Solwise Ltd
*Note: When stripping HDF-400 check length of cuts when stripping (See Below).
**Note: If putting connector boots on, slide them onto the cable before the crimp sleeve, and then slide
the connector boot over the crimp plug after making the cable.
Stripping Widths For HDF-200 and HDF-400 Cable
HDF-200
N-Type Plug, N-Type Socket, SMA Plug, Reverse SMA Plug
Reverse TNC Plug
HDF-400
N-Type Plug N-Type Socket, Reverse TNC Plug
Reverse SMA Plug
Which Tools To Use
HDF-200
Connectors CON-N-TO-
200-CRIMP
CON-NSK-
200-CRIMP
CON-RSMA-
200-CRIMP
CON-SMA-
200-CRIMP
CON-RTNC-
200-CRIMP
Crimp Tool TOOL-CR-
336G
TOOL-CR-
336G
TOOL-CR-
336G
TOOL-CR-
336G
TOOL-CR-
336G
Stripper Tool TOOL-ST-
332D
TOOL-ST-
332D
TOOL-ST-
332D
TOOL-ST-
332D
TOOL-ST-
332D
HDF-400
Connectors CON-N-TO-400-
CRIMP
CON-NSK-400-
CRIMP
CON-RSMA-
400-CRIMP
CON-RTNC-
400-CRIMP
Crimp Tool TOOL-CR-116L TOOL-CR-116L TOOL-CR-116L TOOL-CR-116L
Stripper Tool TOOL-ST-322S TOOL-ST-322S TOOL-ST-322S TOOL-ST-322S