Solwise C1002 User manual
2
Trademarks and/or registered trademarks are the property of their respective owners
The information presented in this publication has been carefully
prepared and is believed to be correct at the time of publication.
However, no responsibility will be assumed for any inaccuracies.
Specifications are subject to change without notice.
The information herein is subject to change without notice. This manual
is periodically reviewed and revised.
No responsibility is assumed for any errors or omissions in this
document.
3
TABLE OF CONTENTS
COMPLIANCESTATEMENT................................................................................................................ 4
DECLARATIONOFCONFORMITY......................................................................................................... 4
NOTES, CAUTIONS, AND WARNINGS................................................................................... 5
PACKAGECONTENT......................................................................................................................... 6
1.INSTALLATION............................................................................................................................. 7
1-1 CONNECT C1002 TO YOUR LOCAL NETWORK.............................................................................7
1-1-1 There is DHCP Server in your LAN...............................................................................7
1-1-2 There is not DHCP Server in your LAN .....................................................................10
1-2 CONNECT C1002 TO YOUR COMPUTER DIRECTLY .....................................................................13
1-3 CONNECT C1002 TO INTERNET..................................................................................................13
2.SOFTWAREINSTALLATION .......................................................................................................... 15
2.1 UTILITY CD..................................................................................................................................15
2.2 LOGIN &ACCESS CAMERA VIDEO ..............................................................................................17
2.2 LOGIN &ACCESS CAMERA VIDEO ..............................................................................................18
TO TAKE SNAPSHOT OF PRESENT SCENE ON SCREEN,CLICK ON THE “SNAPSHOT”BUTTON:............23
2.3ADMINISTRATOR SETUP PAGE PAGE ...........................................................................................24
2.3.1 Device Info ...........................................................................................................................24
2.3.2 Alias Settings ........................................................................................................................24
2.3.3 Date & Time Settings............................................................................................................25
2.3.4 Users Settings.......................................................................................................................25
2.3.5 Multi-Device Settings...........................................................................................................26
2.3.6 Basic Networking Settings ...................................................................................................26
2.3.7 Wireless LAN Settings..........................................................................................................27
2.3.8 ADSL Settings.......................................................................................................................27
2.3.9 UPnP Settings.......................................................................................................................27
2.3.10 DDNS Service Setting ........................................................................................................28
2.3.11 Mail Service Settings..........................................................................................................29
2.3.12 FTP Service Settings ..........................................................................................................29
2.3.13 Alarm Service Settings .......................................................................................................30
2.3.14 Upgrade Device Firmware.................................................................................................30
APPENDIX................................................................................................................................... 31
A. C1002 REAR PANEL.....................................................................................................................31
B. C1002IR TAIL WIRE .....................................................................................................................31
C. CROSS ETHERNET CABLE MAKING TIP .......................................................................................33
4
ComplianceStatement
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
DeclarationofConformity
5
Notes, Cautions, and Warnings
There are two levels of special notation used in this manual. They are:
WARNING: If the actions indicated in a “WARNING” are not
complied with, injury or major equipment damage could result.
A warning statement typically describes the hazard, its possible
effect, and the measures that must be taken to reduce the
hazard.
CAUTION: If the action specified in the “CAUTION” is not complied
with, damage to your equipment could result.
NOTE: A “NOTE” provides supplementary information, emphasizes a point or
procedure, or gives a tip for easier operation.
6
PackageContent
1. Indoor Camera or Outdoor Camera
2. Power Adapter : 5VDC, 1A
Or
3. Utility CD :
7
1.Installation
1-1 Connect C1002 to your Local Network
CAUTION:
Please use the DC
power adapter that is
provided with the camera.
Connecting camera to other power
source will cause permanent
damage to the camera.
NOTE:
Please use straight Ethernet cable
(CAT. 5e) to connect camera to your
home/ office network switch/ hub or a
broadband router.
1-1-1 There is DHCP Server in your LAN
The camera will get IP from DHCP Server (Factory Setting).
Please use “IPCameraTool” in Utility CD to search and link to cameras.
8
“IPCameraTool” ” in Utility CD will find all the Clairvoyant 1002 IP cameras
in your local network.
“DoubleClicks” or ”RightClick” on the camera you want to connect, choose
“AccessIPCamera” will bring up IE browser with camera login screen.
Note:
You can choose to modify the camera to fixed IP by Choosing “Network
Settings”
9
Warning:
Please consult your office network administrator to get a
free IP for your IP Camera, duplicated IP address will
cause undesired problems.
Normally you will not need to change the network settings automatically
obtained from DHCP server.
Please don’t check the “Using Dhcp” in order to use fixed IP address and
network settings.
There is no Password set by factory default, please leave the Password
field blank as it is.
CAUTION:
Please always write down the password and keep
password in safe place. Please kindly notice, if you
forget password you set, you will have to return the
camera to manufacturer for recovery, there is no way to
reset password of your camera.
10
1-1-2 There is not DHCP Server in your LAN
The camera will not be able to get IP from DHCP Server (Factory Setting).
Please use “IPCameraTool” in Utility CD to search and link to cameras.
“IPCameraTool” ” in Utility CD will find all the Clairvoyant 1002 IP cameras
in your local network.
The “AccessIPCamera” will be in gray color, you will not able to link to
your camera at this step. You must choose “NetworkSettings” to set the
camera to fixed IP.
Please modify the “IPAddress” to the same subnet of your computer.
Normally the IP should start with “192.168.xxx.xxx”
11
If you are not sure of your computer IP address, please go to DOS mode
by : “START” => “RUN” => Open “CMD”
12
Type “ipconfig/all” at command prompt,
You will be able to find you computer network settings.
After input correct
network settings, press
“Set”
Follow the procedures
described in 1-1-1 There is
DHCP Server in your LAN
13
1-2 Connect C1002 to your computer directly
Because there is no DHCP Server available,
you have to setup the network settings
manually.
Please follow the procedures in previous
sections (1-1-2) to link to your camera.
1-3 Connect C1002 to Internet
Connect IP Camera to your
broadband router or NAT
gateway.
Do the following setup:
1. Setup Virtual Server/
forward port on your
router to camera,
2. or set router DMZ to
your IP Camera IP,
3. Obtain DDNS service
from DynDNS if you
don’t have fixed public
IP,
4. Setup DDNS account
information to your
camera
14
5. Access camera URL through Internet.
Example:
http://your_camera.dyndns.org:port
Please reference more details of Router & DynDNS setup on Reference
User’s Manual.
15
2.SoftwareInstallation
2.1 Utility CD.
Please insert the “Utility CD” into your CD-ROM drive, auto-run program
will start and below screen will guide you through installation.
To install software and ActiveX plug-in
Please click on the “Install1st” tab to install software and ActiveX plug-in.
17
Click on “Close”,
The IP Camera search utility software icon will display on your
desktop.
Click on the “IPCameraTool” tab to search Clairvoyant 1002 IP cameras in
your local network.
18
2.2 Login & Access Camera video
“DoubleClicks” or ”RightClick” on the camera you want to connect, choose
“AccessIPCamera” will bring up IE browser with camera login screen.
Type “admin” in User field, there is no admin Password set by factory
default; please leave the Password field blank as it is. Click on “Signin”
tab
Note:
Please notice it’s lower case characters admin, the User and Password
are capital sensitive.
On the top left corner, select language (English or Chinese).
20
Note:
1. Clairvoyant 1002 IP camera will required a Microsoft Windows based
PC with Media Player 7.0 or later installed.
2. If the video don’t start, please reference the “ActiveX_Security_Setup” in
Reference Manual.
3. If you see only white screen and your camera is in outdoor or expose
to strong light, please change the “Mode” to “Outdoor”.
4. If you see flickers on video and your camera is installed indoor, please
change the “Mode” to “50Hz” or “60Hz”according to the electricity of
your country. Description of Monitoring Page
Resolution : 320x240（QVGA）/ 640x480（VGA）
Working environment Mode : indoor ( 50Hz/ 60Hz) / outdoor
Photo parameter modulation：Brightness, Contrast
Scout menu : “Snapshot” and “Record” Scout window
setting :
1. May see only current window
2. May increase 3 IP cameras, real-time view video in four
windows as below
Table of contents
Other Solwise IP Camera manuals
Popular IP Camera manuals by other brands
MobileView
MobileView 9100 Series quick guide
TRENDnet
TRENDnet TV-IP745SIC Quick installation guide
Allied Vision Technologies
Allied Vision Technologies AVT GigEBigeye user manual
LEGRAND
LEGRAND VADDIO ConferenceSHOT 10 installation guide
Honeywell
Honeywell H2W4PER3 Quick installation guide
Afidus
Afidus BH-230N user manual
