Solwise SAR-01PA User manual

Solwise Ltd .
SAR-01PA
www.solwiseforum.co.uk
The Solwise Forum is designed to be the first port-of-call for technical support and sales
advice for the whole Solwise product range.
Please check the forum for coverage on any technical problems you have. Many
people have trodden your path before you, and a quick check on the forum will reduce
the pressure on our support staff.

ADSLPCIALCModem User’sManual
2

ADSLPCIALCModem User’sManual
3
Notification is hereby given that Solwise Ltd. reserves the right to modify, change,
update or revise this document from time to time as required without the prior
obligation to notify any person, company or organization. Further, Solwise makes no
warranty or representation, either express or implied, with respect to merchantability, or
fitness of its products for a particular purpose.
Solwise Ltd.
13/15 Springfield Way
Anlaby
Hull HU10 6RJ
UK
Tel [phone] (local rate)
Fax [phone]
Email [e-mail]
Http www.solwise.co.uk
Copyright
All rights reserved. No part of this document may be reproduced in any form or by any means
without written permission from the product manufacturer.
Changes are periodically made to the information in this document. They will be incorporated in
subsequent editions. The product manufacturer may take improvement and/or changes in the
product described in this document at any time.

ADSLPCIALCModem User’sManual
4
1 Introduction .............................................................................................................. 5
1.1 Product Overview............................................................................................. 5
1.2 Specifications ................................................................................................... 5
1.3 System Requirements ....................................................................................... 5
1.4 Operating Temperature ..................................................................................... 5
1.5 Package Contents.............................................................................................. 6
2 Hardware Installation ............................................................................................... 7
2.1 Installing ADSL PCI Modem ........................................................................... 7
3 Driver Installation..................................................................................................... 8
3.1 MS Windows 98 ............................................................................................... 8
3.1.1 PPPoA....................................................................................................... 8
3.2 MS Windows ME ........................................................................................... 13
3.2.1 PPPoA..................................................................................................... 13
3.3 MS Windows 2000 ......................................................................................... 18
3.3.1 PPPoA..................................................................................................... 18
3.4 MS Windows XP ............................................................................................ 24
3.4.1 PPPoA..................................................................................................... 24
4 Driver Uninstallation .............................................................................................. 30
4.1 MS Windows 98 ............................................................................................. 30
4.2 MS Windows ME ........................................................................................... 30
4.3 MS Windows 2000 ......................................................................................... 31
4.4 MS Windows XP ............................................................................................ 31
5 Diagnostic............................................................................................................... 33
5.1 MS Windows 98 ............................................................................................. 33
5.2 MS Windows ME ........................................................................................... 33
5.3 MS Windows 2000 ......................................................................................... 34
5.4 MS Windows XP ............................................................................................ 35
6 Troubleshooting...................................................................................................... 37
6.1 Software.......................................................................................................... 37
6.2 Hardware ........................................................................................................ 37

ADSLPCIALCModem User’sManual
5
1 Introduction
1.1Product Overview
『ADSL』is ”Asymmetric Digital Subscriber Line”, which mean is use the ADSL modem with
telephone on same PSTN line at same time. The voice and data transmission will not be
interference.
1.2Specifications
 ANSI T1.413 lssue2 compliant
 ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
 Discrete multitone ( DMT ) modulation
 Full rate transmission at up to 8 Mbps downstream and 640 kbps upstream
 G.lite version at up to 1.5 Mbps downstream data rates and up to 512 kbps upstream
 Up to 18,000 feet in distance
 Support for Windows 98/ME/W2K/XP
 Full ATM protocol stacks implementation over ADSL , including ATM TC layer , ATM
layer with traffic shaping , AAL layer (AAL5 & SAR) , PPP over ATM and Classical IP
over ATM ( RFC 1483 & RFC1577 ) for Windows.
 Central office DSLAM interoperability ensured
 Peripheral Component lnterconnect (PCI 2.2 compliant)
 Splitterless operation support
1.3System Requirements
 IBM PC/AT or its compatibles
 CPU speed : Pentium 450MHZ
 Memory : 64Mbyte or above
1.4Operating Temperature
 0 ~ 40℃

ADSLPCIALCModem User’sManual
6
1.5Package Contents
 PCI ADSL Modem
 Installation Guide
 Software CD-ROM
 7ft phone cable (RJ-11 Jack)

ADSLPCIALCModem User’sManual
7
2 Hardware Installation
2.1Installing ADSL PCI Modem
 Plug one end of the ADSL cable to RJ-11 jack on the back of ADSL PCI Modem and the
other end to LINE jack on the Wall Socket
Installing Diagram

ADSLPCIALCModem User’sManual
8
3 Driver Installation
3.1MS Windows 98
3.1.1 PPPoA
3.1.1.1 Installing Driver
1. Please insert the driver CD supplied when you see the message of PCI Ethernet
Controller appearing on the screen, then click Next.
2. Select Search for the best driver for your device. [Recommended] and Click
Next.
3. Select
Specify a location and type in the path of CD-ROM drive (for example
H:\Driver), click Next.

ADSLPCIALCModem User’sManual
9
4. Windows has found the driver for the ADSL Modem and click Next.
5. Insert the Windows 98 CD-ROM to your CD-ROM drive and click OK.
6. The installation has been done, click Finish.
7. Click
Next.

ADSLPCIALCModem User’sManual
10
8. Click Yes.
9. Click Next.
10. Select PPPoA and type in the VPI (0 for BT line, 1 for a KC line) and VCI (38 for BT
line, 50 for a KC line) and click Next.

ADSLPCIALCModem User’sManual
11
11. If on a BT line then select VCMUX / NULL, for a KC line then select LLC and click
Next.
12. Insert the Windows 98 CD-ROM to your CD-ROM drive and click OK.
13. Click
Finish.
14. Select Yes, I want to restart my computer now and click OK.

ADSLPCIALCModem User’sManual
12
3.1.1.2 Connect and Disconnect
3.1.1.2.1 Connect
1. Double click the Shortcut to ADSL ISP icon on desktop screen.
2. Type in
User name and Password then click Connect.The computer will connect
to ISP and you can enjoy Internet.
3.1.1.2.2 Disconnect
1. Double click the Shortcut to ADSL ISP icon on desktop screen.

ADSLPCIALCModem User’sManual
13
2. Click Disconnect end connect.
3.2MS Windows ME
3.2.1 PPPoA
3.2.1.1 Installing Driver
1. Please insert the driver CD supplied when you see the message of PCI Ethernet
Controller appearing on the screen, select Specify the location of the driver
(advanced), then click Next.
2. Select Search for the best driver for your device. [Recommended] and check
Specify a location, then type in the path of CD-ROM drive (for example H:\Driver)
and click Next.

ADSLPCIALCModem User’sManual
14
3. Windows has found the driver for the ADSL Modem and click Next.
4. The installation has been done, click Finish.
5. Click Yes to restart computer.
6. Click Next.

ADSLPCIALCModem User’sManual
15
7. Click Yes.
8. Click Next.
9. Select
PPPoA and type in the VPI (0 for BT line, 1 for a KC line) and VCI (38 for BT
line, 50 for a KC line) and click Next.

ADSLPCIALCModem User’sManual
16
10. If on a BT line then select VCMUX / NULL, for a KC line then select LLC and click
Next.
11. Click
Finish.
12. Select Yes, I want to restart my computer now and click OK.

ADSLPCIALCModem User’sManual
17
3.2.1.2
Connect and Disconnect
3.2.1.2.1 Connect
1. Double click the Shortcut to ADSL ISP icon on desktop screen.
2. Type in
User name and Password then click Connect. The computer will connect
to ISP and you can enjoy Internet.
3.2.1.2.2 Disconnect
1. Double click the Shortcut to ADSL ISP icon on desktop screen.

ADSLPCIALCModem User’sManual
18
2. Click Disconnect end connect.
3.3MS Windows 2000
3.3.1 PPPoA
3.3.1.1 Installing Driver
1. Please insert the driver CD into CD-ROM drive and click Next.
2. Select Search for a suitable driver for my device. [Recommended] and click
Next.

ADSLPCIALCModem User’sManual
19
3. Select Specify a location and click Next.
4. Type in the path of CD-ROM drive (for example H:\Driver) and click OK.
5. Click Next.

ADSLPCIALCModem User’sManual
20
6. Click Yes.
7. Click
Next.
8. Click Yes.