sonible ml:mio User manual

rackmount
for ml:series
product information
and installation guide

2
introduction
The sonible rackmount adapter can hold up to two devices
from the sonible ml:series. The ml:series consists of the
USB DI-Box ml:1 and the MADI converter ml:mio. Since
both devices have the same housing, they can be inserted
and exchanged as desired.
Depending on requirements, there are three ways to mount
the USB DI-Box ml:1 and the MADI converter ml:mio.
These sturdily constructed devices can then be screwed
securely into any rack and kept safe from damage during
transport. There is also the option to include a rack pan-
el for three D-Format sockets and HMA connectors which
can all be freely assigned.
•Holds up to two ml:series devices
•Optional rack panel for three D-Format
and HMA connectors
•Easy installation and mounting
•For touring or permanent installation

contents
1x rackmount
1x connector blind
4x countersunk 6mm
M3 TX10 screws
6x countersunk 8mm
M3 TX10 screws
2x ml:mio
routing sticker
2x ml:1 routing sticker
weight & dimensions
44,2mm
1,7’’
1U
depth: 150mm / 5,9’’
weight: 1,35kg / 3,0lbs
482,6mm / 19’’
3

4
installation option 1 - visible outputs
step 1
undo top screws
on your device,
insert into rack
step 2
screw in
8mm TX10 screws
step 3 (optional)
insert additional device

5
installation option 2 - visible switches
step 1
undo top screws on your device,
insert into rack
step 2
screw in 8mm TX10 screws
step 3
add matching routing sticker
to device
step 4 (optional)
insert additional device

6
installation option 3 - with output blind
step 1
undo top screws on your device,
insert into rack
step 2
screw in 8mm TX10 screws
step 3
attach inputs of your choosing
(not provided)
step 4
insert output blind,
screw in 6mm screws,
connect ml:mio
and outputs in blind

sonible GmbH
Haydngasse 10
8010 Graz
Austria
[phone]
[email protected]
www.sonible.com