kim lighting HA32 Series User manual

HA32 - Ribbon Arm Wall Mount with Bottom Scroll
Installation Instructions
P.O. Box 60080 • 16555 East Gale Ave.
City of Industry, California 91716-0080
626/968-5666 •FAX [phone]
Revision 716/10 EC 100715008 Status 3 Part No. 95713
Tools Required:Flat Head ScrewdriverTorque WrenchF" Hex WrenchSealant
NS, SRS, RA17,N" 6- or 12- Point Deep (2" min.) Socket 12" (min.) Long Socket Extension
AE17, BE17, LE19
RA25, AE21, BE21, LE26:L" 6- or 12- Point Deep (2" min.) Socket20" (min.) Long Socket Extension
WARNING: Fixtures must be grounded in accordance with local codes or the National Electrical Code.
Failure to do so may result in serious personal injury.
MAINTENANCE: A regularly scheduled maintenance program must be established to insure paint coating is
intact, corrosion or structural damage has not occurred, and all mounting arms, rods, nuts and bolts are tight.
CAUTION: Structural integrity of mounting plate attachment to wall is by others.
NOTE: All electrical work must be done by a qualified electrician. KEEP THIS SHEET FOR FUTURE REFERENCE.
!
HA32S HA32L
NS / SRS RA25
AE17 / BE17 AE21 / BE21
LE19 LE26
Make certain electrical supply is OFF before starting installation.
1. Remove wiring inspec-
tion cover from wall plate
and wall mount cover.
Adhere rope caulk in a
continuous strip into the
wall plate groove.
2. Securely mount wall
plate over junction box
(by others).
5. Attach base & base top to arm fitter using (4) socket head cap screws. Tighten securely. IMPORTANT! Keep wires
tight when attaching fixture to avoid pinching wires.
4. Install ribbon arm onto
wall plate cover.
!
3. Insert arm bolts into wall
mount cover.
Junction
Box
(By
Others)
Wall Mount
Cover
Base
Arm Fitter
Base Top
Wall
Plate
Groove
CAUTION: Structural integrity of mountingplate attachment to wall is by others.
Arm Bolts

Page 2 Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 • FAX [phone]
HA32S - Ribbon Arm Wall Mount with Bottom Scroll
Installation Instructions
7. Attach bottom scroll to ribbon arm and
wall plate cover.
6. Feed fixture wires from arm fitter through
ribbon arm. Install arm fitter assembly to
ribbon arm using torque wrench. (See
fixture installation instructions for fixture
attachment.)
8. Attach wall plate cover assembly to wall
plate. Secure with two (2) socket head
cap screws. Connect wires observing
polarity, i.e.; green-to-ground, white-to-
common, and black-to-voltage.
9. Attach splice cover using the 10-32 flat
head stainless steel socket screw.
KIM LIGHTING LIMITED WARRANTY
When installed in accordance with Kim Installation Instructions and
accepted trade practices, the following shall apply:
General Product Limited Warranty Coverage
All material and component parts used in the manufacture of Kim
Products, are warranted to be free from defects of material and/or
workmanship for a period of 1 year from date of sale, with the following
exceptions:
Auxiliary Equipment
All auxiliary equipment (such as lamps, ballasts, and transformers)
provided by and/or included in Kim Products shall carry the component
manufacturer's warranty.
Copper and Bronze Landscape Components
Copper and Bronze Landscape fixture components shall be warranted
against defects of material and/o r workmanship, and failure due to
corrosion, for a period of 25 years from date of sale.
Composite In-Grade Components
Composite In-Grade fixture components installed below grade, shall be
warranted against defects of material and/or workmanship, and failure
due to corrosion, for a period of 7 years from date of sale.
Aluminum Landscape Components
Aluminum Landscape fixture components not in direct contact with soil,
shall be warranted against defects of material and/or workmanship for a
period of 3 years from date of sale. Aluminum fixtue components in
direct contact with soil shall be warranted from defects of material and
failure from corrosion for a period of 1 year from date of sale.
Limit of Liability and General Conditions
Only products which are installed, used and maintained in accordance
with applicable Kim instructions, specifications and accepted trade
practices, are covered by the Kim Warranty. During the warranty period,
with proof of purchase, Kim will repair or replace with the same or similar
product, at Kim's option, without charge. Labor costs are the owner's
responsibility and are excluded from this warranty. This warranty is void
if the product is modified, tampered with, misapplied, poorly installed,
improperly maintained, or subjected to abnormal conditions.
Repair or replacement as provided under this warranty is the exclusive
remedy of the purchaser. This warranty is in lieu of all other warranties,
expressed or implied, including any iimplied warranty of fitness for a
particular application. Kim Lighting shall not be liable to the purchaser
for indirect or consequential damages.
How may we serve you better?
Please let us know. Visit our website at:
www.kimlighting.com
Your concerns are important to us.
Socket Head
Cap Screws
(2)