Sonicgrace SDPF10S User manual
1
QUICK START GUIDE
Model: SDPF10S
2
Buttons and jacks
Getting Started
Connecting your DPF with power by using the power adapter provided. The DPF
will start up and go to main menu.
Photo Calendar Setting
5
6
7
1 2 3
4
1. Power: Press to turn on or turn off the DPF player.
2. Play / Pause: Press to enter / confirm; Press to pause when slideshow pictures
and press again to continue slideshow.
3. Right / Left / Up / Down: Press to move cursor right /Left /Up / Down.
4. Menu: Back to last step.
5. SD/SDHC: Insert one of the SD/SDHC cards each time.
6. USB: Insert a USB flash stick.
7. 5V DC IN: Insert the power adaptor cord to connect the unit with power outlet.
Remote control
Setup: Press to set up picture display.
Left: Press to move cursor left or to the last picture.
Right: Press to move cursor right or to the next picture.
Up: Press to move cursor up.
Down: Press to move cursor down.
Enter: Press to enter/confirm; Press to pause when
slideshow pictures and press again to continue slideshow.
Power: Press to turn on or turn off your DPF player.
Exit: press to exit.
Zoom: Press to zoom picture when browse pictures.
Rotate: Press to rotate picture when browse pictures.
pictures directly except in thumbnail pictures mode and
Edit mode.
Note: Please remove the isolating tab to activate remote control battery.
Thank you for your purchasing of Sonicgrace digital photo frame.
This quick start guide will help you setup and start using the player
as quickly as possible.
34
Support
Setting
There are two ways to go to Setting mode:
1. Press LEFT/RIGHT button to move cursor to Setting and press Enter to enter
the setting interface.
2. Press Setup button on remote control to setup interface directly.
There will be 3 icons listed at the left side. From top to bottom, they are Photo Setup,
Calendar Setup and System Setup respectively.
You may press Up button or Down button to select one of the icons, and press
Enter or Play/Pause to enter the detailed setup options (press Exit to return), then
press Up/Down to choose what you want to set, and press Left/Right to change
the settling. Press Exit to after finish the setting.
What you can setup
You can setup slideshow interval time, transition effect, show type in fit screen or
full screen, browse in thumbnail mode or Browse Mode, play repeat mode, photo
auto play or not, brightness and contrast, TFT saturation, OSD language and
restore all of the settings to factory default setting by selecting Reset Default Setting.
Calendar and Clock
In Setup setting (start up setting), choose Calendar Setup and comfirm. Then you
will enter the interface with four options: Display Mode, Date, Clock Mode and
Clock Time.
Press Up/Down to select Date and press Left/Right to set Date.
Press Exit button to go to the main menu interface after setting.
You may follow the same setps to setup Clock.
You can also insert a USB flash disk which has pictures to the USB slot to play
pictures stored in the USB.
The digital photo frame will auto slideshow pictures in your card or USB which has
been inserted.
Keep pressing Exit button on remote control to exit to the main menu.
Loading photos from memory card or USB
Insert one of the SD/SDHC card to your digital photo frame by following the
direction showed as below:
SD/SDHC
2. Contact Sonicgrace Support team
1. Visit the support site.
For manual download and FAQs: www.sonicgracehome.com
Toll Free Call in the USA: 909-465-0887
