—5 —
4. PRINTEDWIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1. FRAME SCHEMATIC DIAGRAM (1/2)·······················4-1
FRAME SCHEMATIC DIAGRAM (2/3) ·······················4-3
FRAME SCHEMATIC DIAGRAM (3/3) ·······················4-5
4-2. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS ············································4-8
•CD-320 (CCD IMAGER)
PRINTED WIRING BOARD ·························4-9
•CD-320 (CCD IMAGER)
SCHEMATIC DIAGRAM ····························4-11
Shematic diagram and printed wiring board of the
VC-264 board are not shown.
Pages from 4-13 to 4-54 are not shown.
•FP-100 (MODE SWITCH), FP-228 (DEW SENSOR),
FP-102 (TAPE TOP/END SENSOR, S/T REEL)
FLEXIBLE BOARDS···································4-55
•FK-1800 (CONTROL SWITCH BLOCK)
PRINTED WIRING BOARD AND
SCHEMATIC DIAGRAM ····························4-57
•CK-102 (CONTROL SWITCH, LCD DRIVE)
PRINTED WIRING BOARD ·······················4-59
•CK-102 (CONTROL SWITCH)(1/2),
PO-006 (PANEL OPEN/CLOSE),
FP-181 (PANEL REVERSE)
SCHEMATIC DIAGRAMS ··························4-63
•CK-102 (LCD DRIVE)(2/2),
LB-072 (EVF BACK LIGHT)
SCHEMATIC DIAGRAMS ··························4-65
•LB-072 (EVF BACK LIGHT),
PO-006 (PANEL OPEN/CLOSE),
FP-181 (PANEL REVERSE)
PRINTED WIRING BOARDS ·····················4-67
•MI-043 (MIC AMP, IR TRANSMITTER)
PRINTED WIRING BOARD ·······················4-69
•MI-043 (MIC AMP)(1/2), ML-023 (LANC, EXT MIC),
SE-121 (MF SENSOR)
SCHEMATIC DIAGRAMS ··························4-71
•MI-043 (IR TRANSMITTER)(2/2)
SCHEMATIC DIAGRAM ····························4-73
•JK-207 (AV IN/OUT, STEADY SHOT)
PRINTED WIRING BOARD ·······················4-75
•JK-207 (AV IN/OUT, STEADY SHOT)
SCHEMATIC DIAGRAM ····························4-77
•ML-023 (LANC, EXT MIC), SE-121 (MF SENSOR)
PRINTED WIRING BOARDS ·····················4-79
•VB-1800 (CONTROL SWITCH BLOCK),
PD-145 (RGB DRIVE, TG, LCD DRIVE)
PRINTED WIRING BOARDS ·····················4-81
•PD-145 (RGB DRIVE, TG)(1/2)
SCHEMATIC DIAGRAM ····························4-83
•VB-1800 (CONTROL SWITCH BLOCK),
PD-145 (LCD DRIVE)(2/2)
SCHEMATIC DIAGRAM ····························4-85
4-3. WAVEFORMS ······························································4-87
Waveforms and parts location of the VC-264 board
are not shown.
Pages from 4-89 to 4-92 are not shown.
4-4. MOUNTED PARTS LOCATION ·································4-93
5. ADJUSTMENTS
1-1. Adjusting items when replacing main parts and boards ··5-2
5-1. CAMERA SECTION ADJUSTMENT ···························5-4
1-1. PREPARATIONS BEFORE ADJUSTMENT
(CAMERA SECTION) ···················································5-4
1-1-1.List of Service Tools························································5-4
1-1-2.Preparations ·····································································5-5
1-1-3.Precaution ········································································5-7
1. Setting the Switch····························································5-7
2. Order of Adjustments ······················································5-7
3. Subjects ···········································································5-7
1-2.
INITIALIZATION OF B, C, D, E, F, 7, 8 PAGE DATA ··
5-8
1-2-1.INITIALIZATION OF C, D, 8 PAGE DATA ··················5-8
1. Initializing the C, D, 8 Page Data····································5-8
2. Modification of C, D, 8 Page Data ··································5-8
3. C Page Table ····································································5-8
4. D Page Table··································································5-10
5. 8 Page Table···································································5-11
1-2-2.INITIALIZATION OF B PAGE DATA ·························5-12
1. Initializing the B Page Data···········································5-12
2. Modification of B Page Data ·········································5-12
3. B Page Table ··································································5-12
1-2-3.INITIALIZATION OF E, F, 7 PAGE DATA ·················5-13
1. Initializing the E, F, 7 Page Data ···································5-13
2. Modification of E, F, 7 Page Data ·································5-13
3. F Page Table ··································································5-13
4. E Page Table ··································································5-15
5. 7 Page Table···································································5-15
1-3. CAMERA SYSTEM ADJUSTMENTS ························5-17
1. 40.5 MHz / 54 MHz Origin Oscillation Adjustment
(VC-264 board) ·····························································5-17
2. HALL Adjustment ·························································5-17
3. MAX GAIN Adjustment ···············································5-18
4. CCD Output 2ch Matching Adjustment (1) ··················5-19
4-1.
Preparations for CCD Output 2ch Matching Adjustment··
5-19
4-2. CCD Output 2ch MatchingAdjustment (1) ··················5-19
5. CCD Output 2ch Matching Adjustment (2) ··················5-20
5-1. CCD Output 2ch Matching Adjustment (2-1) ···············5-20
5-2. CCD Output 2ch Matching Adjustment (2-2) ···············5-20
6. MR Adjustment ·····························································5-21
7. Flange Back Adjustment (Using Minipattern Box)·······5-22
8. Flange Back Adjustment (Using Flange Back Adjustment
Chart and Subject More Than 500m Away) ··················5-23
8-1. Flange Back Adjustment (1)··········································5-23
8-2. Flange Back Adjustment (2)··········································5-23
9. Flange Back Check························································5-24
10. Picture Frame Setting ····················································5-24
11. Color Reproduction Adjustment····································5-25
12. Auto White Balance & LV Standard Data Input ···········5-26
13. Auto White Balance Adjustment ···································5-27
14. White Balance Check ····················································5-28
15. Mechanical Shutter Adjustment ····································5-29
16. Angular Velocity Sensor SensitivityAdjustment ··········5-29
17. Strobe Light LevelAdjustment ·····································5-30
18. Strobe White BalanceAdjustment & Check ·················5-31
1-4. COLOR ELECTRONIC VIEWFINDER SYSTEM
ADJUSTMENT·····························································5-32
1. VCO Adjustment (CK-102 board) ································5-32
2. RGB AMP Adjustment (CK-102 board) ·······················5-33
3. Contrast Adjustment (CK-102 board) ···························5-33
4. Backlight Adjustment (CK-102 board) ·························5-34
5. White Balance Adjustment (CK-102 board) ·················5-34
1-5. LCD SYSTEM ADJUSTMENT ···································5-35
1. VCO Adjustment (PD-145 board) ·································5-35
2. RGB AMP Adjustment (PD-145 board)························5-36
3. Contrast Adjustment (PD-145 board) ····························5-36
4. V-COM LevelAdjustment (PD-145 board) ··················5-37
5. V-COM Adjustment (PD-145 board) ····························5-37
6. White Balance Adjustment (PD-145 board)··················5-38
