Sony Handycam vision ccd-trv16e User manual

CCD-TR315E/TR415E/TR425E/TR515E/TR516E/TR713E

CCD-TRV16E/TRV26E/TRV27E/TRV27EP/

TRV36E/TRV46E

SERVICE MANUAL

MICROFILM

SPECIFICATIONS

AEP Model

UK Model

Russian Model

East European Model

North European Model

CCD-TR415E/TR425E/TR515E/TR713E

CCD-TRV26E/TRV27E/TRV36E/TRV46E

E Model

CCD-TR315E/TR516E

CCD-TRV16E/TRV27EP/TRV46E

Hong Kong Model

CCD-TR315E/TR516E

CCD-TRV16E/TRV46E

Australian Model

CCD-TR315E/TR516E

CCD-TRV16E/TRV46E

Chinese Model

CCD-TR315E/TR516E

CCD-TRV16E/TRV46E

Tourist Model

CCD-TR315E/TRV46E

VIDEO CAMERA RECORDER

— Continued on next page —

B MECHANISM

Video camera recorder

System

Video recording system

2 Rotary heads

Helical scanning FM system

Audio recording system

Rotary heads, FM system

Video signal

PAL color, CCIR standards

Usable cassette

8mm video format cassette

CCD-TR315E/TR415E/TR425E

CCD-TRV16E/TRV26E/TRV27E/

TRV27EP : standard 8

CCD-TR515E/TR516E/TR713E

CCD-TRV36E/TRV46E : Hi8

Recording / Playback time

(using 90 min. cassette)

SP mode: 1 hour and 30 minutes

LP mode: 3 hours

Fastforward/rewind time

(using 90 min. cassette)

Approx. 5 min.

Image device

1/4 inch CCD (Charge Coupled Device)

CCD-TR315E/TR415E/TR425E/

TR515E/TR516E

CCD-TRV16E/TRV26E/TRV27E/

TRV27EP/TRV36E : Approx. 320,000

pixels (Effective : approx 290,000 pixels)

CCD-TR713E

CCD-TRV46E :Approx. 380,000 pixels

(Effective : approx 230,000 pixels)

Viewfinder

Electronic viewfinder

CCD-TR315E/TR415E/TR425E/

TR515E/TR713E/TRV series :

Monochrome

CCD-TR516E : Color

Lens

Combined power zoom lens

Filter diameter 1 7/16 in. (37 mm)

CCD-TR415E : AEP*,UK

CCD-TRV26E : AEP*,UK

: 18 x (Optical), 36 x (Digital)

CCD-TR425E :AEP*,UK

TR515E :AEP*,UK

TR713E :AEP*,UK

CCD-TRV27E : AEP*,UK

TRV36E : AEP*,UK

TRV46E : AEP*,UK

: 18 x (Optical), 72 x (Digital)

CCD-TR315E

CCD-TRV16E

: 18 x (Optical), 180 x (Digital)

CCD-TR415E : AEP*,EE,NE.RU

CCD-TRV26E : AEP*,EE,NE.RU

: 18 x (Optical), 220 x (Digital)

RMT-708

Photo : CCD-TR713E

Photo : CCD-TRV46E

VIDEO CAMERA RECORDER

CCD-TR315E/TR415E/TR425E

CCD-TRV16E/TRV26E/TRV27E/TRV27EP

CCD-TR515E/TR516E/TR713E

CCD-TRV36E/TRV46E

CCD-TR425E : AEP*,EE,NE,RU

TR515E : AEP*,EE,NE,RU

TR516E

TR713E : AEP*,EE,NE,RU

CCD-TRV27E : AEP*,EE,NE,RU

TRV27EP

TRV36E : AEP*,EE,NE,RU

TRV46E : AEP*,E,EE,NE,RU,HK,

AUS,CN,JE

: 18 x (Optical), 330 x (Digital)

* There are two kinds of magnification of

Digital Zoom onlyAEP model. Please

make sure the magnification of your

Handycam with reference to page 3.

Focal distance

3/16 - 8 in. (4.1 - 37.8 mm)

When converted to a 35 mm still camera

CCD-TR315E/TR415E/TR425E/

TR515E/TR516E

CCD-TRV16E/TRV26E/TRV27E/

TRV27EP/TRV36E

: 1 9/16 - 28 in. (39.4 - 709 mm)

CCD-TR713E

CCD-TRV46E

: 1 7/8 - 33 1/2 in. (47.2 - 850 mm)

PAL

For MECHANISM ADJUSTMENTS, refer to

the“8mmVideoMECHANICALADJUSTMENT

MANUAL VII” (9-973-801-11).

Ver 1.0 1999.01

– 2 –

SAFETY-RELATED COMPONENT WARNING !!

COMPONENTS IDENTIFIED BY MARK !OR DOTTED LINE WITH

MARK !ON THE SCHEMATIC DIAGRAMS AND INTHE PARTS

LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE

COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS

APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS

PUBLISHED BY SONY.

1. Check the area of your repair for unsoldered or poorly-soldered

connections. Check the entire board surface for solder splashes

and bridges.

2. Check the interboard wiring to ensure that no wires are “pinched”

or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly transistors,

that were installed during a previous repair. Point them out to

the customer and recommend their replacement.

4. Look for parts which, though functioning, show obvious signs

of deterioration. Point them out to the customer and recommend

their replacement.

5. Check the B+ voltage to see it is at the values specified.

6. Flexible Circuit board Repairing

• Keepthe temperature ofthe solderingiron around 270°Cduring

repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer:

Color temperature

Auto

Minimum illumination*

0.4 lux at F 1.4

0 lux (in NightShot mode)**

Illumination range

0.4 lux to 100,000 lux

Recommended illumination

More than 100 lux

* Minimum illumination expresses the

light level a camcorder requires to

produce a picture. Visible minimum

low light expresses the light level to

produce a visible signal.

**Object invisible for the dark can be

shot with infrared lighting.

LCD screen (TRV series only)

Picture

2.5 inches measured diagonally

2 x 1 1/2 in.(50.3 x 37.4 mm)

On-screen display

TN LCD/TFT active matrix method

Total dot number

61,380 (279 x 220)

Input and output connectors

Video output

Phono jack, 1Vp-p, 75 ohms, unbalanced

Audio output

Monaural, Phone jack, 327 mV

(at output impedance 47 kilohms)

impedance less than 2.2 kilohms

RFU DC OUT

Special minijack, DC 5V

Earphone jack (TRV series only)

Monaural minijack (ø 3.5 mm)

LANC control jack

Stereo mini-minijack (ø 2.5 mm)

MIC jack

Mini jack, 0.388mV low impedance with

2.5 to 3.0 V DC, output impedance 6.8

kilohms (ø 3.5 mm) : Monaural type

Speaker (TRV series only)

Dynamic speaker

General

Power requirements

7.2 V (battery pack)

8.4 V (AC power adaptor)

Average power consumption

(when using the battery pack)

During camera recording

CCD-TR516E : 2.4 W

CCD-TR315E/TR415E/TR425E/

TR515E : 2.5 W

CCD-TR713E : 2.6 W

During camera recording using

LCD

CCD-TRV16E/TRV26E/TRV27E/

TRV27EP/TRV36E : 3.1 W

CCD-TRV46E : 3.2 W

Viewfinder

CCD-TRV16E/TRV26E/TRV27E/

TRV27EP/TRV36E : 2.5 W

CCD-TRV46E : 2.6 W

Operating temperature

32°FC to 104°F (C0°C to 40°C)

Storage temperature

-4°FC to 140°F (-20°C to +60°C)

Dimensions (Approx.)

4 1/4 x 4 1/4 x 7 5/8 in.

107 x 107 x 193 mm)(w/h/d)

Mass (Approx.)

CCD-TR516E : 1 lb 11 oz (780 g)

CCD-TR315E : 1 lb 11 oz (790 g)

CCD-TR415E/TR425E/TR515E :

1 lb 12 oz (810 g)

CCD-TR713E : 1 lb 12 oz (820 g)

CCD-TRV16E/TRV27EP : 1 lb 14 oz (870 g)

CCD-TRV46E ; E,HK,AUS,CN,JE :

1 lb 15 oz (880 g)

CCD-TRV26E/TRV27E/TRV36E :

1 lb 15 oz (890 g)

CCD-TRV46E ;AEP,UK,EE,NE,RU :

1 lb 15 oz (900 g)

excluding the battery pack, lithium

battery, cassette and shoulder strap

2 lb 3 oz (1 kg) (TRV series)

CCD-TR516E : 2 lb 1 oz (920g)

CCD-TR315E : 2 lb 1 oz (930g)

CCD-TR415E/TR425E/TR515E :

2 lb 1 oz (950g)

CCD-TR713E : 2 lb 1 oz (960g)

including the battery pack NP-F330,

lithium battery CR2025, cassette and

shoulder strap

Microphone

Monaural type

Supplied accessories

See page 4.

AC power adaptor

Power requirements

100 -240 V AC, 50/60 Hz

Power consumption

23 W

Output voltage

DC OUT: 8.4 V, 1.5 A in operating mode

Operating temperature

32°F to 104°F(0°C to 40°C)

Storage temperature

-4°F to +140°F(-20°C to +60°C)

Dimensions (Approx.)

5 x 1 9/16 x 2 1/2 in. (125 x 39 x 62

mm)(w/h/d) excluding projecting parts

Mass (Approx.)

9.8 oz (280 g) excluding power cord

Design and specifications are subject to

change without notice.

• Abbreviation

East European model is abbreviated as EE.

North European model is abbreviated as NE.

Russian model is abbreviated as RU.

Hong Kong model is abbreviated as HK.

Australian model is abbreviated as AUS.

Chinese model is abbreviated as CN.

Tourist model is abbreviated as JE.

– 3 –

• Abbreviation

East European model is abbreviated as EE.

North European model is abbreviated as NE.

Russian model is abbreviated as RU.

Hong Kong model is abbreviated as HK.

Australian model is abbreviated asAUS.

Chinese model is abbreviated as CN.

Tourist model is abbreviated as JE.

DIGITAL ZOOM

About the magnification display of section

There are two kinds of magnification of Digital zoom only for the

AEP model. Please make sure the magnification of your Handycam

with reference to the right figure.

Table for difference of function CCD-

TR415E

EE,NE,RU

B/W

220x

CCD-

TR713E

AEP,UK

B/W

72x/330x

CCD-

TR415E

AEP,UK

B/W

36x/220x

CCD-

TR315E

E,HK,AUS,

CN,JE

B/W

180x

CCD-

TR516E

E,HK,AUS,

Color

330x

Model

Destination

View finder

Remote commander (RMT-708)

Hi8

Standard 8

Lens (Digital ZOOM)

Video light

Steady shot

Laser Link

LCD panel

CCD-

TR425E

AEP,UK

B/W

72x/330x

CCD-

TR515E

AEP,UK

B/W

72x/330x

Remark

Note : Refer to lower figure.

¬: with SE-80/81board SE451,452,IC451

¬: with VC-215 board IC751

2.5 inch : TRV series only

CCD-

TR713E

EE,NE,RU

B/W

330x

CCD-

TR425E

EE,NE,RU

B/W

330x

CCD-

TR515E

EE,NE,RU

B/W

330x

CCD-

TRV46E

E,EE,NE,RU

HK,AUS,CN,JE

B/W

330x

2.5 inch

CCD-

TRV36E

AEP,UK

B/W

72x/330x

2.5 inch

CCD-

TRV46E

AEP,UK

B/W

72x/330x

2.5 inch

CCD-

TRV26E

AEP,UK

B/W

36x/220x

2.5 inch

CCD-

TRV27E

AEP,UK

B/W

72x/330x

2.5 inch

Model

Destination

View finder

Remote commander (RMT-708)

Hi8

Standard 8

Lens (Digital ZOOM)

Video light

Steady shot

Laser Link

LCD panel

CCD-

TRV27EP

B/W

330x

2.5 inch

CCD-

TRV36E

EE,NE,RU

B/W

330x

2.5 inch

CCD-

TRV26E

EE,NE,RU

B/W

220x

2.5 inch

CCD-

TRV27E

EE,NE,RU

B/W

330x

2.5 inch

Remark

Note : Refer to lower figure.

¬: with SE-80/81board SE451,452,IC451

¬: with VC-215board IC751

2.5 inch : TRV series only

CCD-

TRV16E

E,HK,AUS,

B/W

180x

2.5 inch

– 4 –

Supplied accessories

1RMT-708Wireless Remote Commander (1)

CCD-TR425E/TR515E/TR516E/TR713E

CCD-TRV27E/TRV27EP/TRV36E/TRV46E

2AC-L10A/L10B/L10C AC power adaptor

3NP-F330 Battery pack (1)

4CR2025 Lithium Battery (1)

The lithium battery is already installed in your camcorder.

5Size AA (R6) battery for Remote Commander

(2)

CCD-TR425E/TR515E/TR516E/TR713E

CCD-TRV27E/TRV27EP/TRV36E/TRV46E

6A /V connecting cable (1)

• Abbreviation

East European model is abbreviated as EE.

North European model is abbreviated as NE.

Russian model is abbreviated as RU.

Hong Kong model is abbreviated as HK.

Tourist model is abbreviated as JE.

7Shoulder strap (1)

821 pin adaptor (1)

CCD-TR415E/TR425E/TR515E/TR713E

CCD-TRV26E/TRV27E/TRV36E

TRV46E:AEP,UK,EE,NE,RU

92 pin conversion adaptor (1)

CCD-TR315E:E,HK/TR516E:E,HK

CCD-TRV16E:E,HK/TRV27EP/TRV46E:E,HK

02 pin conversion adaptor (1)

CCD-TR315E:JE

CCD-TRV46E:JE

– 5 –

Battery terminal

‘

DC IN terminal

Battery SIG terminal

Battery switch

Battery terminal

’

SERVICE NOTE

6

Pull the timing belt in the direction of arrow

with a pinsette while pressing the cassette lid

(take care not to damage) to adjust the

bending of a tape.

7

Let go your hold the cassette

lid and rise the cassette

compartment to take out a cassette.

Pinsette

Timing belt

Press the cassette lid not to rise the

cassette compartment

+–

[DC power supply]

(+5V)

Loading motor

Adjust the bending of a tape

Timing belt

1Refer to 2-1. to remove the front panel block.

2Refer to 2-4. to remove the cabinet (R) assembly.

3Refer to 2-6. to remove the battery panel block.

4Refer to 2-7. to remove the cabinet (L) block.

5Add +5V from the DC POWER SUPPLY and unload with a

pressing the cassette lid.

2.TOTAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

1. POWER SUPPLY DURING REPAIRS

In this unit, about 10 seconds after power is supplied (8.4V) to the

battery terminal using the service power cord (J-6082-223-A), the

power is shut off so that the unit cannot operate.

This following three methods are available to prevent this. Take

note of which to use during repairs.

Method 1.

Connect the servicing remote commander RM-95 (J-6082-053-B)

to the LANC jack, and set the remote commander switch to the

“ADJ” side.

Method 2.

Press the battery switch of the battery terminal using adhesive tape,

etc.

Method 3.

Use the DC IN terminal. (Use the AC power adaptor.)

– 6 –

Note: The self-diagnosis display data will be backed up by the coin-type lithium battery.When this coin-type lithium battery is

disconnected, the self-diagnosis data will be lost by initialization.

1. Self-diagnosis Function

When problems occur while the unit is operating, the self-diagno-

sis function starts working, and displays on the viewfinder or Dis-

play window what to do. This function consists of two display; self-

diagnosis display and service mode display.

Details of the self-diagnosis functions are provided in the Instruc-

tion manual.

SELF-DIAGNOSIS FUNCTION

2. Self-diagnosis display

When problems occur while the unit is operating, the counter of the

viewfinder or Display window shows a 4-digit display consisting

of an alphabet and numbers, which blinks at 3.2 Hz.This 5-charac-

ter display indicates the “repaired by:”, “block” in which the prob-

lem occurred, and “detailed code” of the problem.

3. Service Mode Display

The service mode display shows up to six self-diagnosis codes shown in the past.

3-1. Display Method

While pressing the “STOP” key, set the switch from OFF to “VTR or PLAYER”, and continue pressing the “STOP” key for 5 seconds

continuously. The service mode will be displayed, and the counter will show the backup No. and the 5-character self-diagnosis codes.

3-2. Switching of Backup No.

By rotating the control dial, past self-diagnosis codes will be shown in order. The backup No. in the [] indicates the order in which the

problem occurred. (If the number of problems which occurred is less than 6, only the number of problems which occurred will be shown.)

[1] : Occurred first time [4] : Occurred fourth time

[2] : Occurred second time [5] : Occurred fifth time

[3] : Occurred third time [6] : Occurred the last time

3-3. End of Display

Turning OFF the power supply will end the service mode display.

Viewfinder Display window

Blinks at 3.2 Hz

Refer to page7

Self-diagnosis Code table

C : Corrected by customer

H : Corrected by dealer

E : Corrected by service engineer

Repairede by : Block Detailed Code

Indicates the appropriate step to be taken

E. g.

31 ... Reload the tape.

32 ... Turn on power again.

C3 1 1 1

C : 3 1 : 1 1

Viewfinder Display window

Lights up

Order of previous errors

Backup No. Self-diagnosis codes

[3] C : 3 1 : 1 1

3 C : 3 1 : 1 1

[3] C : 3 1 : 1 1

Display window

Control dial

– 7 –

Remove the cassette, and insert it again after one hour.

Clean with the optional cleaning cassette.

Use the InfoLITHIUM battery.

Load the tape again, and perform operations from the beginning.