Sony Ipela SG-CXTL80 User manual

SG-CXTL80 Camera Manual
July 2010
Product Manual SG-CXTL80 camera
Product Information
SG-CXTL80 HD camera unit
For High Definition
PCS-XG80 and PCS-XG55
Videoconferencing System
www.spireglobal.com

Introduction
The SG-CXTL80 camera unit has been designed specifically for usage with the PCS-
XG80 and PCS-XG55 HD videoconference terminal, providing the smallest design
and highest specification camera unit available today to meet customer expecta-
tions for quality in videoconference applications. This camera unit delivers unparalleled
small form factor HD quality by providing and capturing as standard 1080i video while
seamlessly connecting to the PCS-XG80 and PCS-XG55 which provides numerous
configuration and installation usage options
The small form factor of the camera allows users to deploy 1080i HD videoconferencing
within many variable deployments, providing users with HD desktop deployments,
HD SOHO meeting spaces or HD small room environments.
For traditional meeting spaces or medium to large room deployments we recommend
using the standard complete PCS-XG80 or PCS-XG55 package that ships with the PCS-
CXG80 camera
Target Applications
The SG-CXTL80 camera unit complements PCS-XG80 and PCS-XG55 to be able to
provide 1080 HD communications and video within many meeting spaces:
Target Applications
SOHO/Desktop Small Meeting Room
Kiosk
Meeting Space
Design Reviewing
HD Camera
As well as providing many applications to compliment the standard PCS-XG80 and PCS-
XG55, the SG-CXTL80 camera's streamlined design allows customers to use any size or
style of display. The camera simply is mounted to the top of any display and does not
limit the user for functionality.
www.spireglobal.com

Installation for Desktop Application
The SG-CXTL80 camera connects to a LCD display monitor top and can be fixed using
the supplied mounting bracket and Velcro if needed. The camera uses an internal single
omni-directional microphone, delivering monaural audio, not stereo. The cable from the
camera is connected to the PCS-XG80S codec main camera port, and the microphone
tail from this cable is connected to either microphone A1/A3 port 1(L) or 1(R) port. Please
ensure to setup audio source as mono signal within PCS-XG80S setup configuration
If using Computer Display
If using Consumer Display
www.spireglobal.com

PCS-XG80 and PCS-XG55 setup specifications for SG-CXTL80
Once you connect the SG-CXTL80 camera to the PCS-XG80/PCS-XG55
videoconference terminal please check that the camera is switched on and not muted
from the button on the side of the camera. Within the PCS-XG80 machine status field you
should see that the camera is referenced as an EVI-HD1 followed by version number.
This is to ensure that the PCS-XG80/55 can control the optical zoom of the camera
The camera unit is designed for US markets, as such the camera frequency has been
internally pre-set at manufacturing stage to 60Hz, please ensure that the PCS-XG80/55
video mode is also configured within video1 setup menu to correct display type of HDMI or
RGB format for display used and also ensure that setting for 60Hz frequency is set
www.spireglobal.com

The camera unit only has a single inbuilt microphone please ensure thatyou configure the
PCS-XG80/55 audio 1 setup menu to input mode to Monaural as shown:
The button on the left hand side of the camera body acts as the video and internal mi-
crophone e-mute button, this button is a toggle button “ON / OFF”. When the camera is
live and transmitting video and audio from the internal microphone to the PCS-XG80/55
terminal the red LED Tally light on the camera top lights up to indicate operation
www.spireglobal.com

Camera control from PCS-XG80/55
Zoom:
The SG-CXTL80 camera has optical zoom available that can be controlled through the
PCS-XG80/55 remote control, when accessing the camera menu and highlight and then
select “adjustments” you can select the ZOOM + ZOOM – position directly from the remote
which will activate the zoom of the camera.
Note: When terminal is not in communications you cannot move directly inside the
“adjustments” menu because the camera has no motorized pan or tilt
While “Adjustments” is highlighted please press the “Enter” button from the RF remote
commander, you can then control the ZOOM+ or ZOOM- by pressing the ZOOM buttons
from the RF remote commander. Once the camera is in ZOOM mode either + or – the
adjustments menu will then be visible.
www.spireglobal.com

Additional camera control functions available through PCS-XG80/55 on screen
menu structure are:
•Brightness control
•Backlighting
•White Balance
•Focus
Camera control functions not available for control are:
•Preset control or preset image capture
These cannot be selected or stored
•BrightfaceTM / Noise reduction function
These are not available for this camera as this operation is only available for the
PCSA-CXG80 camera
•Image Flip
This is not available for this camera as this function is only for BRC camera
range that support image flip function
Camera specifications:
Image Sensor 1/3 Type CMOS
Number of Pixels 2M pixels
Lens 10 x Zoom F=5.1 wide
Digital Zoom 12 x (120x optical zoom)
Distance 10mm (wide) to 800mm (tele)
Lens Distortion Less 3% (wide)
S/N Ratio 50dB
Min illumination 12Lx (F1.8 50IRE)
White Balance Auto / Manual / One Push / Indoor / Outdoor
Gain Control Auto or Manual
Focus Auto / One Push / Manual
Configured Signal Setting 1080i/60
Aspect Ratio 16:9
Internal Microphone specifications
Microphone Type OMNI Directional ECM
Sensitivity 7.9mV/Pa/1kHz
Frequency Response 50Hz - 16000Hz
Impedance 2.2kohm
Ratio, Signal to Noise Audio 58dB
www.spireglobal.com

Camera Side Appearance
Camera Front
www.spireglobal.com

CXTL80 Connection cable
CXTL80 Pin assignments
www.spireglobal.com