Sony XR-C2200 User manual

SONY: 3808290,1ill
FM/AM Cassette
Car Stereo
Operating Instructions__
Owner's Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this
product.
Model No. XR-C2300X Serial No.
Model No. XR-C2200 Serial No.
For installation and connections, see the supplied installation/connections
manual.
XR-C2300X
XR-C2200
© 2000 Sony Corporation

Warning
This equipment has been tested and found to
comply with the limils foraClass Bdigital
device, pursuant to Part 15of the FCC Rules.
These limits are demgned to prov,de
reasonable protectionagamst _
interferencemaresidentialmstaUafion.This
equipment generates, uses, and can radiate
radio frequencyenergy and, if notinstalled
and used in accordance with the instructions,
may cause harmful in terference to rad _o
communications. However, there is no
guarantee that interference wfllnot occur haa
particular mstaUation. Ifthis equipment does
cause harmful interference to radio or
televis,on reception, which can be determined
by turning the eqmpment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures'
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipment and receiver.
-- Connect the equipment into an outlet on a
circuit different from tha t to wlmch the
receiver is connected.
-- Consult the dealer or an expenenced radio /
TV technician for help.
You are cautioned that any changes or
modifications not expressly approved m ttus
manual could void your authority to opera te
this equipment.
Welcome !
Thankyou for purch_ing thisSonyCassette
In addition to the cassette playback and radio
operations, you can expand your sys tern by
connecting an optional CD/MD umt *L.
When you operate this unzt or a connected
optional CD umt with the CD TEXT function,
the CD TEXT reformation will appear in the
d,splay when you play a CDTEXT disc _e
*' You can connect a CD changer, an MD changer,
aCD player, or an MD player.
_" ACD TEXT disc isan audio CD that includes
information such as the disc name, artist name,
and track names
This _nformation Js recorded on the dtsc
2

Precautions
•If your car was parked in direct sunlight
resulting in a considerable rise in temperature
inside the car, allow the unit to cool off before
operating it.
• If no power is being supplied to the unit,
check the connections first. Ifeverything is in
order, check the fuse.
•If no sound comes from the speakers of a
two-speaker system, set the fader control to
the center position.
•When the tape is played back for a long
period, the cassette may become warm
because of thebuilt-in power amphfier.
However, this is not a sign of malfunction.
If you have any questions or problems
concerning your unit that are not covered in
thismanual, please consultyour nearest Sony
dealer.
TO maintain high quality sound
If you have drinkholders near your audio
equipment, be careful not to splash juice or
other soft drinks onto the car audio. Sugary
residues on this unit or cassette tapes may
contaminate the playback heads, reduce the
sound quahty, or prevent sound reproduction
tog tm.
Cassette cleaning kits cannot remove sugar
from the tape heads.
®
Notes on Cassettes
Cassette care
•Do not touch the tape surface of a cassette, as
any dirt or dust willcontaminate the heads.
• Keep cassettes away from equipment with
built-in magnets such as speakers and
amplifiers, aserasureor distortion on the
recorded tape could occur.
• Do not expose cassettes to direct sunlight,
extremely cold temperatures, or moisture.
• Slack in the tape may cause the tape to be
caught in the machine. Before you insert the
tape, use a pencil or a similar object to turn
the reel and take up any slack.
•Dis_ortedcassettes and loose labelscancause
problems when inserting or ejecting tapes.
Remove or replaoe loose labels,
• The sound may become distorted while
playing thecassette.The cassetteplayer head
shouldbe cleaned after eachS0hours of use.
Cassettes longer than 90 minutes
The use of cassettes longer than 90 minutes is
not recommended except for long continuous
play. The tape used for these cassettes isvery
thinand tends to stretcheas'fly. Frequent
playing and stopping of these tapes may cause
them to become entangled in the cassette deck
mechanism.
I
3

I
Table of Contents
Location of controls ................................................. 5
Getting Started
Resetting the unit ................................................ 6
Detaching the front panel .................................. 6
How to use the menu ......................................... 7
Setting the clock .................................................. 7
CDIMD Unit
Playing a CD or MD ......................................... 12
Playing tracks repeatedly
-- Repeat Play .............................................. 14
Playing tracks in random order
-- Shuffle Play .............................................. 14
Cassette Player
Listening to a tape ............................................... 8
Radio Reception during Fast-forwarding or
Rewinding of a tape
-- ATA (Automatic Tuner Activation) ........ 9
Radio
Memorizing stations automatically
-- Best Tuning Memory (BTM) .................... 9
Memorizing only the desired stations ........... 10
Receiving the memorized stations .................. 10
Other Functions
Adjusting the sound characteristics ................ 11
Changing the sound and display settings ...... 11
Boosting the bass sound
-- D-bass ....................................................... 12
Additional Information
Maintenance ....................................................... 14
Dismounting the unit ....................................... 15
Specifications ..................................................... 16
Troubleshooting guide ..................................... 17
4

Location of controls
Refer to the pages listed for details.
[] MENU button 7, 9, 10, 11, 13
I_ Volume control dial
I_1 SOURCE (TUNER/CD/MD) button
9, 10, 12
[] PRST/DISC +/- (cursor up/down) buttons
7, 9, 10, 11, 13
During radio reception:
Preset stations select 10
During CD/MD playback:
Disc change 13
I_ DSPL (display mode change) button
8, 12, 13
I_! MODE button
During radio reception:
BAND select 9, 10
During CD or MD playback:
CD/MD unit select 12
[] _-- (eject.) button 8
[] Display window
[] <l_l/IH_(fast winding)/DIR (tape
transport direction change) buttons 8
[] D-BASS button 12
[] SOUND button 11
[] RELEASE (front panel release) button
6,15
[] SEEK/AMS -/+ (cursor left/right) buttons
7, 9, 10, 11, 13
seek 10
Automatic Music Sensor 13
manual search 13
[] Reset button (located on the front side
of the unit behind the front panel) 6
[] ENTER button 7, 9, 10, 11, 13
Number buttons
During radio reception
Preset number select 10
During CD/MD playback:
OREP 14
QSHUF 14
IW OFF button* 6
* Warning when installing in a car
without ACC (accessory) position on
the ignition key switch
Be sure to press _on the unit for two
seconds to turn off the clock display after
turning off the engine.
When you press (_ momentarily, the
dockdisplay does not turn offand this
causesbatterywear.
|
5

Getting Started
Resetting the unit
Before operating the unit for the firs t time or
after replacing the car battery, you must reset
theumt.
Remove the front panel and press the reset
button with a pointed objec t,such as a ball-
pointpen.
l
Reset button
Note
Pressing the reset button will erase the clock
setting and some memorized functions.
Detaching the front panel
You can de tach the front panel of this unit to
protect the u_ut frombezngstolen.
1
2Press _, then slide the front
panel a little to the left, and pull it off
towards you.
Attaching the front panel
Attachpart (_)ofthefrontpaneltopart (_)of
the unit as illustrated and push the left side
into position until it clicks.
Notes
•Be sure not to attach the frontpanel upside
down.
•Do notpress the frontpanel too hardagainst the
unit when attaching it.
•Do not press too hard or put excessive pressure
on the display window of the front panel.
•Do not expose the front panel to direct sunlight
or heat sources such as hot air ducts, and do not
leave it in ahumid place. Never leave Jt on the
dashboard of a car parked in direct sunhght or
where there may be a considerable rise in
temperature
Caution alarm
If you turn the car ignition offwithout
removing the front panel, the caution alarm
willbeep for a fewseconds
If you connect anoptional power amplifier and
do not use the built-inamphfier, thebeep
sound will be deactivated.
Notes
•Besure not to drop the panel when detaching it
from the unit.
•If you detach the panel while the unit isstill
turned on, the power will turn off automatically
to prevent the speakersfrom being damaged.
•When carrying the front panel with you, use the
supplied front panel case.
6

How to use the menu
This unit is operated by selecting items from a
menu.
To select, first enter the menu mode and
choose up/down (+/-of _), or
choose left/right (-/+ of _).
(PRST/DISC,.)
(+) :To select upwards
OPress either side of _to set
the minute. I
2Press _.
Ita#B I
The clock starts.
After the clock setting iscomplete, the
display returns to normalplaybackmode.
(-) : To select downwards
(-) : To select
leftwards (+) : To select
rightwards I
Setting the clock
The clockuses a 12-hour digitalindication.
Example:To set the clock to 10:08
1 Press _, then press either side of
repeatedly until "CLOCK"
appears.
I" #
[© -_E'__.L/.TD, ]
O Press(_).
IF% SET
The hour indication flashes.
OPresseithersideof _toset
the hour.
0Press + side of (SEEK/AMS).
_-v.J
The minute indication flashes.
7

Cassette Player
Listening to a tape
Insert a cassette.
Playback starts automatically.
Fast-winding the tape
During playback, press _or I_1_.
Direction
indicator *To advance To rewind
FWD _
REV _
*The < • mdicator will flash while fast-winding
the tape.
To start playbackdurmg fast-forwardmgor
rewinding, press the other fast-winding button
partially until the locked button _sreleased.
The side facing up isplayed.
[TRPE "-J
The side facing down is played.
{PE ' TRPE "'1
To change the tape's playback direction, press <HI
and IH_.
To stop playback and eject the
cassette
Press--_..
Changing the display item
Eachtimeyoupress _, theitem changes
as follows:
Tape playback *--, frequency _
*While the ATA function isactivated
After you select the desired _tem, the d_splay
willautomahcally change to the Motion
Dlsplaymode after a fewseconds.
In theMotlon D_splay mode, all the above
items are scrolled m the display one by one in
order.
rip
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 1I).
8

Radio Reception during
Fast-forwarding or
Rewinding of a tape
-- ATA (Automatic Tuner Activation)
When fast-fonvarding or rewinding with the
or _ button, the tuner will turn on
automatically.
1During playback, press _.
It-, SET r-i nr-t, ,_]
\-J L k UL r_
2Press either side of
repeatedly until'ATA" appears.
P"" flr FF "-J
3Press+sideof _toselect
#_N= ar
P,'. FIIR-BN-'-J
".-vY
Playmodestarts
4Press _.
To return to normal playback mode, select
"OFF" in step 3 above.
Radio
Memorizing stations
automatically
-- BestTuning Memory (BTM)
The unit selects the stations with the strongest
signals and memorizes them in the order of
their frequencies. You can store up to 6stations
on each band (FM1, FM2, FM3, AM1, and
AM2).
Caution
When tuning m stations while driving, use
Best Tumng Memory to prevent accidents.
Press (SOURCE) repeatedlyto select the
tuner.
Each tlmeyou press _SOURCE), the source
changes as follows.
•TUNER •CD*
L MD* 4
*If the corresponding optional equipment is
not connected, this item will not appear.
2Press _repeatedlytoselectthe
band.
Each timeyoupress _,the band
changes as follows:
_1_ FMI_ FM2 _FM3 --
AM2 _AM1 4
3Press _,then presseither side of
repeatedly until "BTM"
appears.
4Press_.
The unit stores stations in the order of thew
frequenciesonthe number buttons.
A beep sounds when the setting is stored
Notes
• The unit does not store stations with weak
signals. If only a few stations can be received,
some number buttons will retain their former
setting.
• When a number isindicated in the display, the
unit starts storing stations from the one currently
displayed.
9

Memorizing only the
desired stations
You can preset up to 18 FM stations (6 each for
FM1, 2, and 3) and up to 12 AM stations (6
each for AM1 and 2) in the order of your
choice.
1 Press _repeatedlytoselectthe
tuner.
2 Press (_ repeatedlytoselecttbe
band.
3Press either side of _to tune
in the station that you want to store on
the number button.
4Press and hold the desired number
button (CD to (_)) until "MEM" appears.
The number button indication appears in
the display.
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
Receiving the memorized
stations
1Press _repeatedlytoselectthe
tuner.
2Press (_ repeatedlytoselectthe
band.
If you cannot tune in a preset
station
Press either side of _to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station.Presseithersideof ( SEE_AMS_
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(_, then press either side of
repeatedly until "LOCAL" (local seek mode) is
displayed. Then press +side of _to
select "LOCAL-ON. " Press (_.
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to, press and hold either side of
until the desired frequency appears
(manual tuning).
If FM stereo reception is poor
Monaural Mode
1During radio reception, press _,
then press either side of _PRST/DISC)
repeatedly until "MONO" appears.
2Press + side of _until'MONO-
ON" appears.
The sound improves, butbecomes
monaural ("ST" disappears).
3 F_ress_.
To return to normal mode, select "MONO-
OFF" in step 2 above.
3Press the number button (Q to (_) on
which the desired station is stored.
T_p
Press either side of _to receive the
stations in the order they are stored in the
memory (Preset Search Function).
10

Other Functions
Adjusting the sound
characteristics
You canadjustthe bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
1Select the item you want to adjust by
pressing _ repeatedly.
BAS (bass) --_TRE (treble)
BAL (left-right) --FAD (front-rear)
2Adjust the selected item by pressing
either side of
Ad]ust withtn threeseconds after selecting
the item.
Changing the sound and
display settings
The following items can be set:
• CLOCK (page 7).
• BEEP -to turn the beep sound on or off.
• A.SCRL (Auto Scroll)* (page 13).
• D.INFO (Dual Information) to display the
clock and the play mode at the same time
(ON) or to display the informahon
alternately (OFF).
• M.DSPL- to turn the Motion Display on or
off
1 Press_.
2Presseithersideof _PRST/DISC)
repeatedly until the desired item
appears,
Each time you press (-) side of
_, the item changes as follows:
CLOCK--_ BEEP--, A.SCRL*--_ D.INFO--_
M.DSPL
When the radio is off, or when no tape, CD,
or MD isplaying, thb item will not appear.
Note
The displayed item will differ depending on
the source.
|
3Press (+) side of (SEEK/AMS) to select the
desired setting (Example: ON or OFF).
4_ess_.
After the mode settingis complete, the
display returns to normal playback mode.
11

Boosting the basssound
D-bass
You can enjoy a clear and powerful bass
sound. The D-bass function boosts the low
frequency and high frequency signal with a
sharper curve than conventional bass boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
east, ' with the D-BASS control
]
0dB
_D BAS_ 3
•D BA_5 2
B_S 1
D BASS 3
D BASS 2
Frequency (Hz)
Adjusting the bass curve
Press _repeatedly to select the
desired bass curve.
As the D-BASS number increases so does
the effect.
D.BASS-1 -'-* D.BASS-2 -"* D.BASS-3 --*
D.BASS-OFF
Note
The bass sound may distort at same volume. If the
bass sound distorts, select less effective bass curve.
With Optional Equipment
CD/MD Unit
Th_s umt can control a maximum of ten
external CD/MD untts m this configuratton'
CD umt - maximum of five
MD unit -maximum of five
Any combination up to ten will work.
If you connect an ophonal CD unit with the
CD TEXT function, the CD TEXT reformation
will appear m the display when you play a CD
TEXT d_sc.
Playing a CD or MD
1Press _repeatedly to select CD
or MD.
2 Press _until the desired unit
appears.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Changing the display item
Each time you press _ during CD, CD
TEXT, or MD playback, the item changes as
follows'
Elapsed playback time
Discname*_/Artist name*_
Track name*_
L
*' ltyou have not labeled the discor if there isno
discname prerecorded on the MD, "NO NAME"
appears in the display.
.2 If you play a CD TEXTdisc,the artist name
appears in the display after the discname
(Only for CD TEXT discswith the artist name.)
,3 If the track name of a CO TEXTdlscor MD is not
prerecorded, "NO NAME" appears in the
d_splay.
12

After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
np
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 11).
Automatically scrolling a disc name
-- Auto Scroll
If the disc name, artist name, or track name on
a CD TEXT disc or MD exceeds 8 characters
and the Auto Scroll function is on, information
automatically scrolls across the display as
follows:
•The disc name appears when the disc has
changed (if the discname isselected).
• The track name appears when the track has
changed (if the track name isselected).
If you press _ to change the display
item, the disc or track name of the MD or CD
TEXT disc is scrolled automatically whether
you set the function on or off.
1During playback, press _.
2Press either side of
repeatedly until "A.SCRL" appears.
3Press + side of _to select
"A.SCRL-ON."
Locating a specific track
-- Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) momentarily for each track
you want to skip.
To locate
preceding
tracks
To locate
succeeding
_tracks
Locating a specific point in a track
-- Manual Search
During playback, press and hold either
side of _. Release when you
have found the desired point.
[,: ::OF)
To search I_ ;:" TO search
Changing Discs
During playback, press either side of
momentarily.
The desired disc in the current unit begins
playback.
For succeeding discs
4Press _.
To cancel Auto Scroll, select "A.SCRL-OFF" in
step 3 above.
Note
For some discs with very many characters, the
following cases may happen:
-- Some of the characters are not displayed
--Auto Scroll does not work.
For preceding discs
Disc number
I
Track number
13

|
Playing tracks repeatedly
-- Repeat Play
You can select'
• REP-1 - to repeat a track.
• REP-2 - to repeat a disc.
During playback, press Q(REP)
repeatedly until the desired setting
appears. -I_REP-1 •REP-2
REP-OFF4
Repeat Play starts.
To return to normal playback mode, select
"REP-OFF" in step above.
Playingtracks in random
order - Shuffle Play
You can select"
,,SHUF-1 - to play the tracks on the current
disc in random order.
• SHUF-2 - to play the tracks in the current
unit in random order.
• SHUF-ALL - to play all the tracks in all the
umts in random order.
Additional
Information
Maintenance
Fuse Replacement
When replacing the fuse, be sure to use one
matching the amperage ratmg stated on the
original fuse If the fuse blows, check the
power connechon and replace the fuse. If time
fuse blows again after replacement, there may
be an internal malfunction. In such a case,
consult your nearest Sony dealer.
Fuse (10 A)
Warning
Never use a fuse with an amperage rating
exceeding the one supphed with the unit as
th_s could damage the unit
During playback, press _(SHUF)
repeatedly until the desired setting
appears.
_SHUF-1 •SHUF-2 --
SHUF-OFF•SHUF-ALL
Shuffle Play starts.
To return to normal playback mode, select
"SHUF-OFF" in step above.
14

Cleaning the Connectors
The unit may not function properly ifthe
connectors between the unit and the front
panel are not clean. Inorder to prevent this,
open the front panel by pressing CRELF-.ASE),
then detach it and clean the connectors with a
cotton swab dipped in alcohol. Do not apply
too much force. Otherwise, the connectors may
bedamaged.
Dismounting the unit
1
2Releasekey (supplied)
Main unit
Backof the front panel
Notes
•For safety, turn off the engine before cleaning
the connectors and remove the key from the
ignition switch.
•Never touch the connectors directly with your
fingers or with any metal device.
3
4
15

Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
19 watts (for XR-C2300X)/18 watts (for XR-C2200) per channel
minimum continuous average power into 4 ohms, 4 channels
driven from 20 Hz to 20 kHz with no more than 1% total
harmonic distortion.
Other specifications
I
Cassette player section
Tape track
Wow and flutter
Frequency response
S_gnal-to-nolse ratio
4-track 2-channel stereo
013 % (WRMS)
30 - 15,000 Hz
55 dB
Tuner section
FM
Tunmg range
Antenna terminal
Intermedmte frequency
Usable sensihvlty
Selechvl_'
Slgnal-to-nmse ratio
87 5 - 107.9 MHz
External antenna connector
10,7MHz
9 dBf
75 dB at 400 kHz
65 dB (stereo),
68 dB (mono)
Harmomc dmtortion at 1 kHz
0 7 % (stereo),
0.4 % (mono}
Separahon 35 dB at 1 kHz
Frequency response 30 - 15,000 Hz
AM
Tumng range
Antenna terminal
Intermediate frequency
SensifivRy
530 - 1,710 kHz
External antenna connector
10.7 MHz/450 kHz
30.v
Power amplifier section
Outputs Speaker outputs
(sure seal connectors)
Speaker Impedance 4 - 8 ohms
Maximum power output XR-C2300X
50 W ×4(at 4 ohms)
XR-C2200
45 W x 4 (at 4 ohms)
General
Outputs
Tone controls
Power requirements
D_mensmns
Mounting dimensions
_ass
Supplied accessories
Ophonal accessones
Op'aonal equipment
Audto output
Power antenna relay
control lead
Power amphfier control
lead
Bass -+8 dB at 100 Hz
Treble -+8dB at 10 kHz
12 V DC car batte D"
(negatwe ground)
Approx 188 x58 x 182 mm
(7'/2 x 2 3/8 x71/4m)
(w/h/d)
Approx. 182 x53 x163 mm
(7 l/4x21/sx 61/2m.)
(w/h/d)
Approx 1 2 kg (2 lb 10 oz)
Parts for installation and
connectmns (1 set)
Front panel case (1)
BUS cable (supphed with
an RCA pm cord)
RC-61 (1 m), RC-62 (2 m)
CD changer (10 dines)
CDX-838, CDX-737,
CDX-636
MD changer (6 discs)
MDX-65
Other CD/MD changers
with the Sony-BUS system
Source selector
XA-C30
Design and specifications are subject to change
without notice.
16

I
Troubleshooting guide
The fo Uowing checklist will help you remedy the problems you may encounter with your unit.
Before going through the checklist below, check the connections and operating procedures.
General
Problem Cause/Solution
No sound. • Setthefadercontroltothecenterpositionfortwo-speaker
systems.
•Rotate the dial clockwise to adjust the volume.
The contents of the memory • Thepowercordorbatteryhasbeendisconnected.
have been erased. • The resetbuttonwaspressed.
--* Store again into the memory.
Indications do not appear in the Remove the front panel and clean the connectors. See
display. "Cleaning the connectors" (page 15) for details.
Tape playback
Problem Cause/Solution
The sound is distorted. The tape head is contaminated.
--_ Clean the head with acommercially available dry4ype
cleaningcassette.
Radio reception
Problem
Preset tuning is not possible. • Memorizethecorrectfrequency.
•The broa dcast signal is too we ak.
Automatic tuning is not Thebroadcastsignalistooweak.
possible. --* Use manual tuning.
The stations cannot be Connectanpowerantennacontrollead(blue)oraccessory
received, power supply lead (red) to the power supply lead of a car's
The sound is hampered by antennabooster. (Whenyourcarhasbuilt-inFM/AMantenna
noises, in the rear/side glass only.)
The "ST" indication flashes. •Tuneinthefrequencyaccurately.
•The broadcast signalis too weak.
---_Set toMONO mode (page 10).
CD/MD playback
Problem CauselSolution
The sound skips. Adirtyordefectivedisc.
Cause/Solution
17

Error displays (when an optional CD/MD unit is connected)
The foil owing indications will flash for abo u tfive second s, and an alarm sound will be heard.
Display Cause Solution
The disc magazine is not inserted in Insert the disc magazine in the CD /
NOMAG the CD/MD unit. MD unit.
N O DIS C No disc is inserted in the CD/MD unit. Insert discs in the CD/MD unit.
NG DISGS ACD/MDcannotplaybecauseof InsertanotherCD/MD.
someproblem,
A CD is dirty or inserted upside Clean or insert the CD correctly.
down. _2
ERROR" An MD does not playbecause of some Insert anotherMD.
problem. _2
BEAN K,1 MD._N°trackshavebeenrecorded onan PlaYit.an MD with tracks recorded on
The CD/MD unit cannot be operated Press the resetbutton of the unit.
RESET because of someproblem.
The lid of the MD unit is open or MDs Close the lid or insert the MDs
NO READY arenotinsertedproperly, properly.
The arnbient temperature ismore than Wait until the ternperature goes
HI TEMP 50°C (122°F). downbelow 50oc (122OF).
*_ When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear
in the display.
,2 The disc number of the disc causing the error appears in the display.
IfLheabove-mentioned solutions do not help improve the situation, consult your nearest Sony
dealer.
18