Sony CFD-980 Operating Instructions (English,... User manual

3-861-066-32(1)
1998 by Sony Corporation
CD Radio
Cassette-Corder
EN
Operating Instructions page 2EN
Manual de instrucciones página 2ES ES
CFD-980

Introduction2EN
Warning
To prevent fire or shock hazard, do
not expose the player to rain or
moisture.
Information
This Compact Disc player is classified as a
CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT label is
located at the rear.

3EN Introduction
Basic Operations
EN
Table of contents
Basic Operations
4Playing a CD
6Listening to the radio
8Playing a tape
10 Recording on a tape
The CD Player
12 Using the display
13 Locating a specific point in a
track
14 Playing tracks repeatedly
(Repeat Play)
15 Playing tracks in random order
(Shuffle Play)
16 Creating your own program
(Program Play)
18 Preventing sound from skipping
(ESP)
The Radio
19 Presetting radio stations
20 Playing preset radio stations
The Timer
21 Setting the clock
22 Waking up to music
24 Falling asleep to music
Setting Up
25 Choosing the power sources
27 Selecting the audio emphasis
(Sound Mode/MEGA BASS)
Additional Information
28 Precautions
30 Troubleshooting
32 Maintenance
33 Specifications
34 Index

Basic Operations4EN
Playing a CD
Basic Operations
Connect the supplied AC power adaptor (see page 25).
1Press OPERATE to turn on the
player.
2Press 6PUSH OPEN/CLOSE
down to open the lid of the CD
compartment and place the CD
on the CD compartment.
3Close the lid of the CD
compartment.
With the label side up
2,3
14

Basic Operations
Basic Operations
5EN
Use these buttons for additional operations
Display
Playing time
Track number
OPERATE 6PUSH OPEN/CLOSE
VOLUME +/–
^
p
=/+
To Press
Adjust the volume VOLUME +/–
Stop playback p
Pause playback ^
Press again to resume play
after pause.
Go to the next track +
Go back to the previous track =
Remove the CD 6PUSH OPEN/CLOSE
Turn off the player OPERATE
4Press ^.
The player plays all the tracks
once.
Note
You cannot open the lid
of the CD compartment
when the speakers are
facing upward. This is
to prevent the CD from
falling out of the CD
compartment.
CD compartment

Basic Operations6EN
Listening to the radio
Connect the supplied AC power adaptor (see page 25).
1Press OPERATE to turn on the
player.
2Press BAND until the band you
want appears in the display.
3Hold down TUNING/TIME SET
+/– until the frequency digits
begin to change in the display.
The player automatically scans
the radio frequencies and stops
when it finds a clear station.
If you can't tune in a station,
press the button once at a time.
Display
Indicates an FM stereo
broadcast.
13
2

Basic Operations
Basic Operations
7EN
Use these buttons for additional operations
OPERATE
VOLUME +/–
MODE
MONO/ST
To Press
Adjust the volume VOLUME +/–
Turn off the radio OPERATE
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself
for AM.
Tip
If the FM broadcast is
noisy, press
MODE•MONO/ST
until “Mono” appears in
the display and the
radio will play in
monaural.
Note
When carrying the
player, be sure to
telescope the antenna
completely and fold it
down to prevent
damaging it.
for FM for AM

Basic Operations8EN
Playing a tape
Connect the supplied AC power adaptor (see page 25).
1Press OPERATE to turn on the
player.
2Press p6 to open the tape
compartment and insert a
recorded tape. Use TYPE I
(normal) tape only. Close the
compartment.
3Press (.
The player starts playing.
1
With the side you want
to play facing upward
Display
32

Basic Operations
Basic Operations
9EN
Use these buttons for additional operations
To Press
Adjust the volume VOLUME +/–
Stop playback p6
Fast-forward or rewind the tape )or 0
Pause playback P
Press the button again to
resume play after pause.
Eject the cassette p6
Turn off the player OPERATE
OPERATE 0/)
p6
PVOLUME +/–

Basic Operations10EN
Recording on a tape
Connect the supplied AC power adaptor (see page 25).
1Press OPERATE to turn on the
player.
2Press p6 to open the tape
compartment and insert a blank
tape. Use TYPE I (normal) tape
only.
3 Select the program source you
want to record.
To record from the CD player,
insert a CD (see page 4) and press
pon the CD section.
To record from the radio, press
BAND and tune in the station
you want (see page 6.)
21
With the side you want to
record on facing upward
Display
4

Basic Operations
Basic Operations
11EN
Use these buttons for additional operations
Tips
• Adjusting the volume or
the audio emphasis (see
page 27) will not affect
the recording level.
• To erase a recording,
proceed as follows:
1 Press OPERATE.
2 Press FUNCTION
repeatedly until
“TAPE” appears in
the display. Insert the
tape whose recording
you want to erase into
the tape compartment.
3 Press r.
OPERATE p6 P
To Press
Stop recording p6
Pause recording P
Press the button again to
resume recording.
Turn off the player OPERATE
4Press rto start recording.
((is depressed automatically.)

The CD Player12EN
Using the display
You can check information about the CD
using the display.
The CD Player
Checking the total track number and playing
time
Check the display in stop mode.
If the CD has more than 10 tracks, “OVER 10” appears
in the display.
DISPLAY/ENTER
MEMORY
Checking the remaining time
Press DISPLAY/ENTER•MEMORY while playing a
CD.
The track numbers in the music calendar disappear
after they are played.
To display Press DISPLAY/
ENTER•MEMORY
The current track number Once
and the remaining time
on the current track*
Remaining time on the CD Twice
and the number of tracks left
The current track number Three times
and playing time
* For a track whose number is more than 20 the remaining
time appears as “– –:– –”.
Music calendar
Total playing time
Total track number

The CD Player
The CD Player 13EN
Locating a specific
point in a track
You can locate a specific point in a track
while playing a CD using +or =.
To locate Press
a point while listening to +(forward) or =
the sound (backward) while playing
and hold down until you
find the point.
a point while observing +(forward) or =
the display (backward) in pause and
hold down until you find
the point.
=/ +

The CD Player14EN
Playing tracks
repeatedly
(Repeat Play)
You can play tracks repeatedly in
normal, shuffle or program play modes
(see page 16).
1Press OPERATE to turn on the player.
2Press p.
“Cd” appears in the display.
3Press MODE•MONO/ST until the repeat mode
you want appears in the display.
To repeat Select
a single track “REP 1”
all the tracks “REP ALL”
tracks in random order “SHUF” “ REP”
programed tracks “PGM” “REP” and then
progam tracks (see step 4 on
page 16).
4Do either of the following to start repeat play:
•When you’ve selected “REP1”, select the track
by pressing =or +and press ^.
•When you’ve selected “REP ALL”, “SHUF”
“REP” or “PGM” “REP”, press ^.
To cancel Repeat Play
Press MODE•MONO/ST until “REP” disappears
from the display.
^
MODE
MONO/ST =/+
OPERATE
p

The CD Player
The CD Player 15EN
Playing tracks in
random order
(Shuffle Play)
You can play tracks in random order.
1Press OPERATE to turn on the player.
2Press p.
“Cd” appears in the display.
3Press MODE•MONO/ST until “SHUF” appears in
the display.
4Press ^to start shuffle play.
To cancel Shuffle Play
Press MODE•MONO/ST until “SHUF” disappears
from the display.
^
MODE
MONO/ST
OPERATE p

The CD Player16EN
Creating your
own program
(Program Play)
You can make a program of up to 20
tracks in the order you want them to be
played.
=/+
DISPLAY/ENTER
MEMORY
Programed track Playing order
1Press OPERATE to turn on the player.
2Press p.
“Cd” appears in the display.
3Press MODE•MONO/ST until “PGM” appears in
the display.
4Press =/+and press DISPLAY/ENTER•
MEMORY for the tracks you want to program in
the order you want. You can program up to 20
tracks.
5Press ^to start program play.
To cancel Program Play
Press MODE•MONO/ST until “PGM” disappears
from the display.
Tips
• You can play the same
program again, since
the program is saved
until you open the CD
compartment.
• You can record your
own program. After
you’ve created the
program, insert a blank
tape into the tape
compartment and press
rto start recording.
^
MODE
MONO/ST
OPERATE p

The CD Player
The CD Player 17EN
To check the order of tracks before play
Press DISPLAY/ENTER•MEMORY.
Every time you press the button, the track number
appears in the programed order.
To change the current program
Press ponce if the CD is stopped and twice if the CD
is playing. The current program will be erased. Then
create a new program following the programing
procedure.

The CD Player18EN
Preventing sound
from skipping
(ESP)
The ESP (Electronic Shock Protection)
function prevents the sound from
skipping by using a buffer memory that
stores music data for about 10 seconds.
1Press OPERATE to turn on the player.
2Press p.
“Cd” appears in the display.
3Press ESP.
The ESP indicator lights up.
To release the ESP function
Press ESP again.
Notes
• Playing may stop when
the player gets a strong
shock even with the
ESP function on.
• You may hear a noise
or sound skip:
– when you listen to a
dirty or scratched
CD.
– when you listen to an
audio test CD.
– when the player
receives continuous
shock.
• Sound may drop for a
while if you press ESP
during play.
• During recording, you
cannot change the
setting of the ESP
function.
ESP indicatorOPERATE ESP p

The Radio
The Radio
19EN
The Radio
Presetting radio
stations
You can store radio stations into the
player’s memory. You can preset up to
20 radio stations, 10 for each band in any
order.
TUNING/TIME SET +/–
PRESET +/–
BAND
1Press OPERATE to turn on the player.
2Press BAND to select the band.
3Tune in a station you want.
4Hold down DISPLAY/ENTER•MEMORY for
about 2 seconds.
5Press PRESET+/– until the preset number (1 to 10)
you want for the station flashes in the music
calendar.
6Hold down DISPLAY/ENTER•MEMORY again.
The new station replaces the old one.
OPERATE DISPLAY/ENTER
MEMORY

The Radio20EN
Playing preset
radio stations
Once you've preset the stations, use
PRESET +/– to tune in your favorite
stations.
1Press OPERATE to turn on the player.
2Press BAND to select the band.
3Press PRESET +/– to tune in a stored station.
BAND
PRESET +/–OPERATE
Preset number