Sony DSLR-A390 - alpha; Digital Single Lens Reflex... User manual

5
,0
4-191-056-11 (1)
function
function
Additional infbrmation on this product and
answers to fYequently asked questions can be
iound at our Customer Support Website.
http://www.sony.net/
Printed using VO(; (\%latile Organic
(;ompound) fl'ee vegetable oil based ink.
Printed in Thailand
]
IIIIIIIIIIIII
4191056110
_390
Digital Single Lens Reflex Camera
Instruction Manual
DSLR-A390
¢_ InfoLITHIUM _
,M _ H.--iml
SERIESMEMORYSTI_KT,,, ,o,,_ ,_,,o_o_,_o,,,,......
© 2010 Sony Corporation
Viewingimagesona
computer
Printingimages

MENUbutton--* a 1--* [Quality]--* Selectthedesiredsetting
RAW (RAW) File lormat: RAW (raw data)
This format does not per[brm any digital processing on the
images. Select this format to process images on a computer
for prolcssional purposes.
• The image size is fixed to the maximum size. The image
size is not displayed on the LCD monitor.
RAW+J (RAW & File lormat: RAW (raw data) + JPEG
JPEG) A RAW image and a JPEG image are created at the same
time. This is suitable when you need two image files, a JPEG
for viewing, and a RAW for editing.
• Tile image quality is fixed to [Fine] and tile image size is
fixed to [L].
FiNE (Fine) File lormat: JPEG
STD (Standard) The im_ge is compressed in tile JPEG format when recorded.
Since the compression rate of ST[:) (Standard) is higher than
that of FINE (Fine), the file size of STD is smaller than that
of FINE. This will allow more files to be recorded on one
memory card, but tile image quality will be lower.
Nole
• For details on the ram/her of ilruJgesthat cml he taken when the image quMity is
changed, see p_ge 29.
¢-a
II=
=
About RAW images
You need tile "hnage Data Converter SR" soflv,,rare included on the CD-ROM '_o
=
(supplied) in order to open a RAW image recorded on this camera. With this software,
a RAW image can be opened and converted to a common fbrmal, such as JPEG or
TIFF, and its white balance, color saturation, contrast, etc., can be readjusted. "==
• The RAW lormat image cannot be printed using a DPOF (print) designated printer
or a PictBridge compliant printer.
• You cannot veril> the eflccts of D-Range Optimizer other than those of _[_
(Standard) if you play back and enlarge an image recorded in RAW format.
117

Settingthe methodfor recordingona
memorycard
MENUbutton--, % 2--, [Filenumber]--, Selectthedesired
setting
Series
Reset
The camera does not reset numbers and assigns numbers to
files in sequence until the number reaches "9999."
The camera resets numbers in the following cases and assigns
numbers to files fl'om "0001." When the recording folder
contains a file, a number one higher than the largest number
is assigned.
- When the folder lormat is changed.
- When all the images in the fnlder are deleted.
- When the memory card is replaced.
When the memory card is lormatted.
The recorded images are stored in automatically-created folders in the
DCIM folder of the memory card.
MENUbutton--, % 2--, [Foldername]--, Selectthedesired
setting
Standard term The R_lder name lormat is as lollows: fnlder mHnber +
MSDCF.
Example: 100MSDCF
Date form The lolder name format is as follows: lolder number + Y (the
last digit)/MM/DD.
Example: 10100405 (Folder name: 100, date: 04/05/2010)
118

You can create a folder in a memory card for recording images,
A new folder is created with a number incremented one higher than the
largest number currently used, and the folder becomes the current recording
folder,
MENUbutton--, % 2 --, [Newfolder]
When a standard form folder is selected and there are two or more folders,
you can select the recording folder to be used to record images.
MENUbutton--, _ 2--, [Selectfolder]--,Selectthedesired
folder
Note
•You cannot selecl the folder when you select the selling [Date form].
c_
Note that formatting irrevocably erases all data on a memory card, _a
including protected images. _.
MENUbutton--, ::_i]1--, [Formatl--,[OKI _=
Notes
• During Ihe lk3rmal, the access lamp lights up. Do nol eiect the memory card while the
lamp is lit.
• Formal the memory card using the camera. If"you format it on a computer, the
memory card may not be usable x,vi|h the camera, depending on lhe lormat type used.
• Formatting may take several minutes depending on the memory card.
119

Changingthe noisereductionsetting
When you set the shutter speed to a second or longer (Long exposure
shooting), noise reduction is turned on for the same duration that the shutter
is open.
This is to reduce the grainy noise typical ill a long exposure. When noise
reduction is ill progress, a message appears and you cannot take another
picture. Select [On] to prioritize the image quality. Select [Offl to prioritize
the timing of shooting.
MENUbutton--, a2 --, [Longexp.NR]--, [Off]
Notes
• Noise reduction is not performed on continuous shooting, continuous br_cketing, or
cominuous self-timer images even when it is set to [On].
• When the exposure mode is set to AUTO or Scene Selection, you cannot turn ofl
noise reduction.
When shooting with the [SO set at 1600 or above, the camera reduces the
noise that becomes more noticeable when the camera sensitivity is high.
Select [On] to prioritize the image quality. Select [Offl to prioritize the
timing of shooting.
MENUbutton--, a2 --, [HighISONR]--, [Off]
Notes
• Noise reduction is not performed on continuous shooting, continuous br_cketing, or
cominuous self-timer images even when it is set to [On].
• When the exposure mode is set to AUTO or Scene Selection, you cannot turn ofl
noise reduction.
120

Changingthe functions of the control dial
When the recording mode is M (Manual exposure), you call set the camera
so that the adjustable item (the shutter speed or the aperture value) call be
selected using only the control dial.
It is convenient if you select the most commonly-used item when adjusting
the exposure.
MENUbutton--+ _1 --+[Ctrldialsetup]--+ Selectthedesired
setting
C'3
t.¢=
=
<=
=
121

Changingothersettings
Selects the sound produced when the shutter is locked, during self-timer
countdown, etc.
MENUbutton--, ,,_ 3--, [Audiosignals]--, Selectthedesired
setting
You call select the background color of the LCD monitor from [Black],
[White], [Brown], or [Pink].
MENUbutton--+ %1 --+[DisplayColor]--+Selectthedesired
setting
You call turn off the Help Guide that is displayed when you operate the
camera. This is convenient when you want to perform the next operation
quickly.
MENUbutton--+ ,,_ 1 --+ [HelpGuidedisp.]--+ [Off]
You call set different time intervals for the camera to switch to power save
mode (Power save) for the Live View (LV) and view'finder modes (OVF).
Pressing the shutter button halfway down returns the camera to the
shooting mode.
MENUbutton--+ ,_ 1 --+[PowerSave(LV)]or [PowerSave
(OVF)]--+Selectthedesiredtime
122

N0le
•Regardless of the setting here, the camera turns to power save mode al:er 30 minutes
when the camera is connected to a TV or the drive mode is set to g (Remote
Commander).
Resets the date. See page 25 for details.
MENUbutton--+ ,_ 2 --+ [Date/Timesetupl--+Setupthedate
andtime
MENUbutton--, % 2 --, [_ Language]--, Selectthelanguage
C'3
t.¢=
=
<=
=
123

Setting the LCDmonitor
The brightness of the LCD monitor is automatically adjusted to the
surrounding lighting conditions using the light sensor (page 35).
You call set the brightness of the LCD monitor manually.
MENUbutton--_ ,_ 1 --_ [LCDbrightness]--_ [Manual]--_
Selectthedesiredsetting
N01es
• When it is set to [Auto], do not cover the light sensor with yore"hand and so on.
• When using the camera with the AC-PW10AM AC Adaptor (sold separately), the
brightness of the LCD monitor is always set to the brightest setting even if you select
[Auto].
You can check the recorded image on the LCD monitor right after the
shooting. You can change the displayed time.
MENUbutton--* _1 --* [Autoreview]--* Selectthedesired
setting
Mole
• In auto review, the image will not be displayed in the vertical position even if
[PlaybackDisplay] is sel to [Auto rotate] (page 102).
124

When the LIVE VIEW/OVF switch is set to "OVF," looking into the
viewfinder turns off the LCD monitor.
In the default setting, while looking into the viewfinder, the LCD monitor
is turned off to prevent the battery pack from wearing down.
If you want to turn on the LCD monitor while looking into the viewfinder,
select [Off].
MENUbutton-+ _ 1-+ [Autooffw/VF] -+ [Off]
t,c:z
=
=
125