Sony easydive leo R FX3 User manual

Easydive - Via dell’Industria 13 int 6, 48015 Cervia (RA) - Italy ![email protected] - [phone] | [phone] !
!Mode 1: When you press the button you have autofocus, when you release the
button will take the shot (Default Setting).
!Mode 2: When you press the button, you have first autofocus and then shooting.
(if the lens is already in focus, direct shooting).
The following keys are active in Manual Mode (M). If you choose another mode, only
the functions that can be set manually will be available.
4. Aperture -
5. Aperture +
6. Shutter Speed -
7. Shutter Speed +
!8. ISO -
!9. ISO +
Press the Buttons 4,5,6,7,8,9 once to change by one step. Keep pressed to quickly
change the chosen parameter.
Main Mode"
3. This button starts or ends the Video Recording (REC).
2.In Video or S&Q Mode, Activate or Stop Video Recording. In Photo Mode:
1. Autofocus (exposure reading) in AF-S |AF-C and shooting mode change. To
change shooting mode, press and hold button 1until the Red Led lights up (15
sec.). In MF it calls up the Push Focus function.
| FX3 |
Button Panel LeoR
11. On /Offelectronic board. To switch on, press until the red LED of the electronics
is activated. To switch off,push until the camera monitor turns off.The camera will
turn offcompletely. To turn on the camera, push this button again.
10. Switch Mode, allows you to change the function of each button. The mode
switch is indicated by ablue or yellow LED switched on.

Easydive - Via dell’Industria 13 int 6, 48015 Cervia (RA) - Italy ![email protected] - [phone] | [phone] !
Switch Mode Blue Led Enable
!
!
!
!
1. Autofocus (exposure reading) in AF-S |AF-C and shooting mode change. To
change shooting mode, press and hold button 1until the Red Led lights up (15
sec.). In MF it calls up the Push Focus function.
| FX3 |
Button Panel LeoR
2.Activate or Stop Video Recording.
3. Change Camera Mode (Photo Auto |P|A|S|M-Video -S&Q).
4. In Photo Mode, Drive Mode. In Video Mode, it allows the acquisition of the White
Balance in Manual.
5. It allows the selection of the White Balance Preset.
6. In Photo Mode, Methering Mode.
11. On /Offelectronic board. To switch on, press until the red LED of the electronics
is activated. To switch off,push until the camera monitor turns off.The camera will
turn offcompletely. To turn on the camera, push this button again.
9. Focus area type change.
8. Focus Mode Change (AF-S |AF-C |DMF |MF).
7. Shift of the Focus point (8 perimeter points +1Central Point).
10. Switch Mode, allows you to change the function of each button. The mode
switch is indicated by a blue or yellow LED switched on.

Easydive - Via dell’Industria 13 int 6, 48015 Cervia (RA) - Italy ![email protected] - [phone] | [phone] !
!
!
!
!
* It is Necessary Set the Customizable Button in the Camera Menu. It is also possible to change the Customizable
Button during the dive.
1. This Button Confirm the selection. In the Camera menu, you can enter into
the various sub-menus.
3. Display button, allows you to change the information in camera display. In
Camera Menu, you can move the selection upwards.
4. Customizable Function Button Left*. In Camera Menu, you can move the
selection to the left.
5. Customizable Function Button Right *. In Camera Menu, you can move the
selection to the Right.
6. Customizable Function Button Down*. In Camera Menu, you can move the
selection downwards.
7. Menu button, allows you to enter the Camera menu. Inside the menu it
allows you to exit from the sub-menu or return to Live View mode.
8. Play button allows you to enter into the Camera Gallery to review photos and
videos made. Buttons 3, 4, 5, 6 allow you to navigate through the gallery.
9. Canc button allows you to delete the photos or videos Selected in the
Gallery. Press the button 3 and then button 1 to confirm the deletion.
11. On /Offelectronic board. To switch on, press until the red LED of the electronics
is activated. To switch off,push until the camera monitor turns off.The camera will
turn offcompletely. To turn on the camera, push this button again.
Switch Mode Yellow Led Enable
| FX3 |
Button Panel LeoR
2. Activate or Stop Video Recording.
10. Switch Mode, allows you to change the function of each button. The mode
switch is indicated by a blue or yellow LED switched on.