Sony SCPH-77004 User manual

Instruction Manual
SCPH-77004
7008137
Before using this product, carefully read this manual and the additional information in the expanded version of this manual available at our Web site:
eu.playstation.com/manuals. Retain this manual for future reference.
GB

To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To prevent fire or shock hazard, do not place a container filled
with liquids on top of the console.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
Caution
The use of optical instruments with this product will increase
eye hazard. As the laser beam used in this unit is harmful to
eyes, do not attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
This appliance is classified as a CLASS 1 LASER product.
This equipment has been tested and found to comply with the
limits set out in the EMC Directive using a connection cable
shorter than 3 metres (9.8 feet).
WARNINGS
Read carefully before operating your
PlayStation®2console
A few people may experience epileptic seizures when viewing flashing lights or
patterns in our daily environment. These persons may experience seizures while
watching TV or playing video games, including DVD-Videos or games played on
the PlayStation®2 console. Players who have not had any seizures may
nonetheless have an undetected epileptic condition. Consult your physician
before operating the PlayStation®2 console if you have an epileptic condition or
experience any of the following symptoms while watching TV programmes or
playing video games: altered vision, muscle twitching, other involuntary
movements, loss of awareness of your surroundings, mental confusion, and/or
convulsions.
Some PlayStation®or PlayStation®2 format software titles may perform
differently on this console than they do on previous PlayStation®2 or PlayStation®
consoles, or may not perform properly on this console. For more information,
visit our Web site at www.playstation.com
Where you see this symbol on any of our electrical products or packaging, it
indicates that the relevant electrical product should not be disposed of as general
household waste in Europe. To ensure the correct waste treatment of the product,
please dispose of it in accordance with any applicable local laws or requirements
for disposal of electrical equipment. In so doing, you will help to conserve natural
resources and improve standards of environmental protection in treatment and
disposal of electrical waste.
2WARNINGS

3
Table of contents
WARNINGS ..........................................................................................2
Precautions............................................................................................4
Preparation
Getting started......................................................................................7
Part names ............................................................................................8
Connecting to a TV..............................................................................9
Connecting digital audio equipment ..............................................12
Connecting the controller ................................................................12
Connecting the AC adaptor and AC power cord ..........................13
Turning the console on and off ........................................................14
Games
Playing a game ..................................................................................15
Using Memory Cards ........................................................................18
Audio CDs
Playing an audio CD ........................................................................20
DVDs
Watching a DVD ................................................................................22
Using the playback modes................................................................26
Adjusting DVD player settings ........................................................28
Table of contents
Main menu
Displaying the main menu ..............................................................35
Using the Browser screen ................................................................35
Using the System Configuration menu ..........................................36
Using the Version Information screen ............................................39
Networking
Connecting to a network ..................................................................42
Creating network settings ................................................................44
Additional information
Compatible software ........................................................................45
Accessories..........................................................................................46
GUARANTEE ....................................................................................47
Specifications......................................................................................48
Troubleshooting ................................................................................50
GB

This product has been designed with the highest concern for safety. However, any
electrical device, if used improperly, has the potential for causing fire, electrical
shock or personal injury. To help ensure accident-free operation, follow these
guidelines:
• Observe all warnings, precautions and instructions.
• Stop use and unplug the AC power cord from the electrical outlet immediately
if the device functions in an abnormal manner or produces unusual sounds or
smells.
• Contact the appropriate PlayStation®customer service helpline which can be
found within every PlayStation®and PlayStation®2 format software manual if
the device does not operate properly.
Safety
• Do not remove the console exterior or disassemble the console. The laser beam
emitted from the lens of this unit may be harmful to the eyes.
• Do not use the console near water.
• Keep the console and all connecting cords and cables out of the reach of
children.
• Do not touch the plug of the AC power cord with wet hands.
• Do not touch the console or connected accessories during an electrical storm.
• Do not touch the console or AC adaptor for extended periods of time while the
console is turned on as extended contact may cause low-temperature burns.
• Do not place the console and connected accessories on the floor or in a place
where they may cause persons walking by to trip or stumble.
• Adjust the settings of the DVD player according to the instructions provided
before playing a DVD. If the settings are not correct, a loud sound may be
emitted, possibly injuring your ears or damaging the speakers.
• Do not touch a disc while it is spinning as personal injury or damage to the
disc may result.
• Do not close the disc cover in a way that could pinch your hand or fingers as
personal injury or damage to the console may result.
Precautions
Health
• Stop using the console immediately if you experience any of the following
symptoms. If the condition persists, consult a doctor.
– Lightheadedness, nausea, or a sensation similar to motion sickness
– Tired, uncomfortable or aching hands or arms
– Tired, dry or aching eyes
• When operating the unit, play in a well-lit room and keep a safe distance from
the TV screen.
• Avoid prolonged use of the console. Take a break of about 15 minutes during
every hour of play.
• Do not use the console when you are tired or short of sleep.
• Listening to sound continuously for a long time with a high volume may
adversely affect the ears. Be careful especially when using headphones. Adjust
the volume so that surrounding sounds can be heard.
4Precautions

5
Precautions
Use and handling
• Do not throw or drop the console or accessories, or expose them to strong
physical shock.
• Do not place the console or accessories on surfaces that are unstable, tilted or
subject to vibration.
• Do not expose the console or accessories to high temperatures, high humidity
or direct sunlight (use in an environment where temperatures range from 5 °C
to 35 °C).
• Do not place the console or accessories in locations subject to sudden
temperature change (for example, changes of 10 °C per hour or more).
• Do not leave the console or accessories in a car with its windows closed
(particularly in summer).
• Do not place the console in locations of poor ventilation such as small,
enclosed areas, directly against a wall or on a thick carpet or bedding.
• Do not expose the console to dust, smoke or steam. This can cause the console
to malfunction.
• Do not allow liquid or small particles to get into the console.
• Do not put any objects on the console.
• Do not touch or insert foreign objects into the connectors of the console or
accessories.
• Do not place the console close to magnetic fields produced by magnets or
loudspeakers.
• Do not set the console other than in the vertical or horizontal position. When
placing in the vertical position, use the Vertical Stand (for PlayStation®2) (sold
separately) that is compatible with this console. Also, do not change the
position while the console is turned on.
AC adaptor and AC power cord use
• To help ensure safe operation, regularly inspect the AC adaptor and AC power
cord. If damaged, stop use immediately and contact the appropriate
PlayStation®customer service helpline which can be found within every
PlayStation®and PlayStation®2 format software manual.
• Do not use a power cord other than the supplied AC adaptor and AC power
cord.
• Check that there is no dust or lint on the power plug before inserting into an
electrical outlet. If the plug becomes dirty, wipe it off with a dry cloth before
connecting.
• Unplug the AC power cord from the electrical outlet before cleaning or moving
the console, or when you do not intend to use the console for an extended
period of time. When disconnecting, grasp the power cord by the plug and
pull straight out of the electrical socket. Never pull by the cord and do not pull
out at an angle.
• Do not connect the AC adaptor and/or AC power cord to a voltage transformer
or inverter.
Notes on safety when using the Analog Controller
(DUALSHOCK®2)*
• Stop using the console immediately if you begin to feel tired or if you
experience discomfort or pain in your hands or arms while operating the
Analog Controller (DUALSHOCK®2). If the condition persists, consult a
doctor.
• The Analog Controller (DUALSHOCK®2) is intended for use with the hands
only. Do not bring it into contact with your head, face or the bones of any other
part of the body.
• The vibration function of the Analog Controller (DUALSHOCK®2) can
aggravate injuries. Do not use the vibration function if you have any ailment or
injury to the bones, joints or muscles of your hands or arms. Note that some
PlayStation®2 and PlayStation®format software titles set the vibration function
to “On” by default. In most cases, the vibration function can be set to “Off” in
the options menu of the software. Do not play such titles using the Analog
Controller (DUALSHOCK®2) unless you have set the vibration function to
“Off”.
• Avoid prolonged use of the Analog Controller (DUALSHOCK®2). Take a break
at about 30-minute intervals.
* These notes also apply to other controllers.
GB

Connecting with a network cable
Do not connect network cables or telephone cords of the following types to the
network connector:
• Standard residential telephone lines
• Network cables not appropriate for use with a 10Base-T/100Base-TX network
• Any ISDN (digital) compatible phone or data line
• PBX phone lines
• Other “unknown” types of telephone lines
Disc handling
• Do not touch the disc surface when handling a disc; hold it by the edges.
• Do not stick paper or tape onto discs and do not write on discs.
• Fingerprints, dust, dirt or scratches on the disc can distort the picture or
reduce sound quality. Always handle carefully and make sure discs are clean
before use.
• Do not leave discs near a heat source, in direct sunlight or in high humidity.
• Store discs in their cases when not in use - scratched and damaged discs will
not function correctly.
• Clean discs using a soft cloth, lightly wiping from the centre outwards. Do not
use solvents such as benzine, commercially available cleaners not intended for
CDs or anti-static spray intended for vinyl LPs.
• Do not leave a disc in the console when moving or changing the position of the
console.
• Do not use irregularly shaped discs (for example, heart- or star-shaped discs)
or damaged, re-shaped or repaired discs.
Never disassemble the console or supplied accessories
Use the PlayStation®2 console and accessories according to the instructions in this
manual. No authorisation for the analysis or modification of the console, or the
analysis and use of its circuit configurations, is provided. There are no user-
serviceable components inside the PlayStation®2 console. Disassembling the
console will void the guarantee. Additionally, there is a risk of exposure to laser
radiation as well as to electrical shock hazards.
When connecting the console to a plasma or projection* TV
Do not leave a still image on the TV screen for an extended period of time, as this
may leave a faint image permanently on the screen.
* Except LCD screen types.
Note on safety when playing DVDs or CDs
If you set the volume too high, it may harm your hearing or damage the speakers.
Exercise care when setting the volume.
Moisture condensation
If the console or disc is brought directly from a cold location to a warm one,
moisture may condense on the lens inside the console or on the disc. Should this
occur, the console may not operate properly. In this case, remove the disc and turn
off and unplug the console. Do not put the disc back in until the moisture
evaporates (this may take several hours). If the console still does not operate
properly, contact the appropriate PlayStation®customer service helpline which
can be found within every PlayStation®and PlayStation®2 format software
manual.
Cleaning
• For safety reasons, before cleaning the console or connected accessories, 1)
turn off the console, 2) disconnect the power plug for the console from the
electrical outlet, and 3) remove the network cable from the network connector.
• When cleaning the console, use a soft, dry cloth. Do not use paint thinner,
solvents, other chemicals or a chemically-treated dust cloth to clean the product.
• When dust accumulates in the console vents, remove the dust with a low-
powered vacuum cleaner.
• Do not touch the lens located inside the disc cover. To help protect the lens
from dust, keep the disc cover closed except when inserting or removing discs.
Exterior protection
To help prevent damage to the painted parts, follow the precautions below:
• Do not spill liquids such as alcohol, benzine, paint thinner or other chemicals
on the product.
• Do not place any rubber, vinyl or plastic items on the painted surfaces for an
extended period of time.
6Precautions

7
Getting started
Check that you have all of the following items. If any items are missing,
contact the appropriate PlayStation®customer service helpline which
can be found within every PlayStation®and PlayStation®2 format
software manual.
Checking the package contents
Getting started
Preparation
You can place the console in either the horizontal or vertical position.
Horizontal position
Set the console horizontally.
Vertical position
When setting the console in the vertical
position, use the SCPH-70110 E Vertical
Stand (for PlayStation®2) (sold separately).
Note
Some Vertical Stands (for PlayStation®2) cannot be used with this model of the
PlayStation®2 console ( page 46). Choose the SCPH-70110 E when purchasing
a Vertical Stand.
Positioning the console
GB
Preparation
PlayStation®2 console...1 Analog Controller
(DUALSHOCK®2)...1
AC adaptor...1 AV Cable (integrated
audio/video)...1
Euro-AV connector plug...1
Instruction Manual...1
AC power cord...1

Caution
Do not place the console in locations where it may be exposed to the
following conditions:
• Places subject to excessive cigarette smoke or dust. Cigarette smoke
residue or dust build-up on the internal components, such as the lens,
may cause the console to malfunction.
• Places subject to extreme temperatures, in direct sunlight, near a heat
source, or in a car with its windows closed (particularly in summer).
These conditions may warp the exterior of the console or cause the
console to malfunction.
• Places close to magnetic fields, such as those produced by magnets or
loudspeakers.
• Places subject to vibration.
* The “ ” product family logo can be rotated to match the horizontal or
vertical positioning of the console.
Note
You can connect USB devices that are compatible with the PlayStation®2 console.
Note, however, that not all USB-compatible products work with the PlayStation®2
console. Refer to the instructions supplied with the device to be connected for
more information.
PlayStation ® 2console front
Part names
8Part names
RESET
Controller port 2
""product family logo*
A(open) button
IR receiver
Front vent
USB connector
MEMORY CARD slot 2
MEMORY CARD slot 1
Controller port 1
]/1 (on/standby) indicator
]/1 (on/standby) RESET button
Disc cover

9
Connecting to a TV
Note
For part names of the Analog Controller (DUALSHOCK®2), see “Using the
Analog Controller (DUALSHOCK®2)” ( page 17).
PlayStation ® 2console rear
• Do not plug the AC power cord for the console into the electrical
outlet until you have made all other connections.
• Check that the TV is turned off.
Connect the console to the TV as shown below.
Connecting to a TV using the supplied AV Cable
Before connecting
Connecting to a TV
GB
Preparation
Rear vent
!DC IN 8.5v
connector
AV MULTI OUT connector
DIGITAL OUT (OPTICAL)
connector
NETWORK connector
VIDEO L-AUDIO-R
Audio and video inputs of the TV
Do not use when
connecting to a
monaural TV.
To the AV MULTI
OUT connector
AV Cable (integrated audio/video)
Console rear
White RedYellow

Caution
If you display a still image on a plasma or projection* TV screen for an
extended period of time, “ghosting” may occur. This is a characteristic of
these types of TVs. Static, non-moving images, such as console setting
menus, DVD menus or paused images, may leave a faint image permanently
on the TV screen if left on for an extended time. Refer to the instructions
supplied with your TV for details.
* Except those of LCD screen types.
Note
The console can be connected to a VCR or an integrated TV/VCR. Note, however,
that if you play a DVD with copy-protection encryption, picture quality may be
reduced.
Connect your PlayStation®2 console to the Euro-AV connector (SCART)
on the TV using the Euro-AV connector plug and AV Cable (integrated
audio/video), making sure you match the colour-coded plugs of the
AV Cable to the matching jacks of the connector plug.
After connecting
Set your TV to the appropriate video input mode. Refer to the
Instruction Manual of your TV.
Connecting to a TV with a Euro-AV connector
using the Euro-AV connector plug
10 Connecting to a TV
To Euro AV
connector
To AV MULTI
OUT connector
Console rear
Euro-AV
connector plug
AV Cable (integrated audio/video)

11
Connecting to a TV
Picture quality differs depending on the type of cable used. Use the
information below to determine the best connection method.
If you use a cable sold separately, refer to the instructions supplied with
the cable.
When using cables sold separately
Notes
• The DVD player’s progressive scan mode is only available when playing a disc
recorded in NTSC format, and viewed on a TV that supports progressive scan
(480p).
• You cannot connect the console to a TV with component video inputs that are
exclusively for HDTV use (Y PBPR). Refer to the instructions supplied with
your TV for details.
GB
Preparation
TV Cable type
A TV with S VIDEO inputs S VIDEO Cable (SCPH-10060 E)
A TV without video inputs RFU Adaptor (SCPH-10072 C)
A TV with Euro-AV (SCART) Euro-AV Cable (SCPH-10142)
connector
A TV with component video Component AV Cable (for PlayStation®2)
input connectors (SCPH-10100 E)
Picture quality scale
High quality
nAV Cable (supplied) nSVIDEO Cable nComponent AV Cable
nRFU Adaptor
This scale is intended only as a reference. Depending on the product or
condition of your TV,the picture quality may be different.
When using the Euro-AVCable, picture quality may vary depending on
your TV’s AV connection.
For optimum picture quality,connect your Euro-AVcable to an RGB-
compatible socket on your TV.Refer to the instructions supplied with
your TV for details.

By using a commercially available optical digital cable, you can enjoy
surround sound with the effect of being in a movie theatre or a concert
hall. When connecting the console to audio equipment with digital
connectors, refer to the instructions supplied with the device to be
connected.
Notes
• If you connect the console to audio equipment using an optical digital cable, it
may affect the audio output of some PlayStation®2 format software with the
result that no sound is produced. If this happens, use a cable such as the
supplied AV Cable (integrated audio/video) and connect it to the console’s
AV MULTI OUT connector. Do not use an optical digital cable.
• After connecting digital audio equipment, set “Digital Out (Optical)” to “On”
in the System Configuration menu. For details, see “Digital Out (Optical)”
( page 37).
Connecting digital audio
equipment
1 Insert the Analog Controller (DUALSHOCK®2) into a controller
port of the console.
Note
Some software titles designate a specific controller port to be used. Refer to the
instructions supplied with the software for details.
Connecting the controller
12 Connecting digital audio equipment
DIGITAL IN
OPTICAL
Console rear
Connected device
Commercially available optical
digital cable
MEMORY CARD
Console front
Analog Controller
(DUALSHOCK®2)

13
Connecting the AC adaptor and AC power cord
Warning
•The socket-outlet shall be installed near the equipment and shall be easily
accessible.
•Do not plug the AC power cord for the console into the electrical outlet
until you have made all other connections.
1 Connect the AC power cordto the AC adaptor.
2 Plug the connector of the AC adaptor into the ! DC IN 8.5V
connector on the console rear.
Connecting the AC adaptor and
AC power cord
3 Plug the AC power cord into the electrical outlet.
The =/1 (on/standby) indicator on the console front will light up in
red to indicate that the console is in standby mode.
GB
Preparation
AC adaptor
AC power cord
Console rear
AC adaptor
!DC IN 8.5V connector
Console rear
AC power cord
To the electrical outlet
Some regions and countries may
use a different electrical outlet
plug from the one illustrated.
RESET
Console front
]/1 indicator

Do not turn on the console until you have finished these steps. Refer to
the instructions supplied with your TV for details.
• Turn on the TV.
• Change your TV setting to display output from the line to which the
console is connected.
1 Check that the =/1 (on/standby) indicator on the console front
is lit up in red.
2 Press the =/1 (on/standby)/RESET button on the console front.
The =/1 indicator on the console front will turn green and output
from the console will be displayed on the TV.
Turning on the console
Before turning on the console
Turning the console on and off
Notes
• The first time you turn on the console after purchase, screens for setting
“Language”, “Time Zone” and “Daylight Savings Time (Summer Time)” will be
displayed. Follow the on-screen instructions to complete the settings.
• If you connect the console to a wide-screen TV, set “Screen Size” in the System
Configuration menu ( page 37).
1 Press and hold the =/1 /RESET button on the console front for
more than a second.
The =/1 indicator will turn red to indicate that the console has
entered standby mode.
Warning
The power is not completely turned off when the console is in standby
mode. If you do not plan to use the console for an extended period of time,
unplug the AC power cord from the electrical outlet.
Turning off the console
14 Turning the console on and off
RESET
Console front
=/1/RESET button
=/1indicator
RESET
Console front
=/1/RESET button
=/1indicator

15
Playing a game
Playing a game
Games
1 Turnon the console ( page 14).
The main menu is displayed ( page 35).
2 Press the A (open) button on the console front.
The disc cover opens.
3 Place the disc in the console.
Set the disc in the disc holder with the label side facing up.
Starting a game
GB
Games
=/1/RESET buttonA(open) button
Disc cover
Place the disc in the console with the label
side facing up.
Place the disc so that all three tabs
are above the disc's surface.
Check that the connections to the TV and audio equipment are correct
and that the precautions have been met.
• “Precautions” ( page 4)
• “Connecting to a TV” ( page 9)
• “Connecting the controller” ( page 12)
• “Connecting the AC adaptor and AC power cord” ( page 13)
Note
To play online games, you first need to connect to and set up a network. See
“Connecting to a network” ( page 42) for details.
Before playing a game

4 Close the disc cover.
Push the middle of the disc cover. After the disc cover is closed, the
game will start.
Notes
• You can also start a game from the Browser screen ( page 35).
• If you turn on the console after inserting a disc, the game will start
automatically.
To reset a game
Press the \/1 (on/standby)/RESET button on the console front. Do not
accidentally press the @/1/RESET button while playing a game, as
doing so will cause the game to reset.
Caution
When removing a disc, check that the disc has stopped completely. Do not
touch the disc if it is spinning, as doing so may cause injury, damage to the
disc or console malfunction.
1 Press the A button on the console front.
Ending a game
Push the middle of the disc cover.
2 Remove the disc.
Hold down the black centre part of the console, and then lift the
disc by the edges.
3 Close the disc cover.
4 Press the =/1 /RESET button.
The main menu is displayed ( page 35).
Changing game discs
1 Open the disc cover and remove the disc.
When removing a disc, hold down the black centre part of the disc
holder and then lift the disc by the edges.
2 Insert a disc.
3 Close the disc cover and reset the console.
The new game will start.
Note
You do not need to turn off the console when changing games.
16 Playing a game
Press the black centre part
of the disc holder.

17
Playing a game
The Analog Controller (DUALSHOCK®2) is equipped with a pressure-
sensitive button function. It also has a vibration function.
Part names
* The left and right analog sticks, or the L3 and R3 buttons, function only in
analog mode (indicator: red).
* The L3 and R3 buttons function when the analog sticks are pressed.
Note
Before using the Analog Controller
(DUALSHOCK®2), with the console turned on,
rotate the left and right analog sticks once with your
thumbs before starting a game. Do not twist the
analog sticks, but rotate as if drawing a circle as
shown in the diagram.
Using the Analog Controller (DUALSHOCK ® 2)
About mode switching
The ANALOG mode button can be used to switch between two modes. Switch to
the appropriate mode for use. Note, however, that some software titles make this
adjustment automatically.
Notes
• When using the Analog Controller in digital mode, the left and right analog
sticks do not function. Also, the pressure-sensitive button function is turned
off.
• Depending on the software, you may not be able to switch modes even if you
press the ANALOG mode button.
About analog controls
• When playing a PlayStation®2 format software title, you can use all
buttons in analog mode except for the START, SELECT, L3 and R3
buttons.
• When playing a PlayStation®format software title, only the left and
right analog sticks can be used in analog mode.
Note
Depending on the software, the buttons for use in analog mode may be limited.
Refer to the instructions supplied with the software for details.
About the vibration function
The vibration function can be set to ON or OFF in the software options
menu.
Note
Depending on the software, the vibration function may be set to “On”
automatically.
GB
Games
SELECT button
L2 button
L1 button
Directional
buttons
Mode indicator
ANALOG mode button
START button
R2 button
R1 button
button
button
button
button
Right analog stick/R3 button*
Left analog stick/L3 button*
Digital mode
(indicator: off)
Analog mode
(indicator: red)

You can use the Analog Controller (DUALSHOCK®) (SCPH-110 E) with
the PlayStation®2 console, but the functions of the buttons in analog
mode may be different from those of the Analog Controller
(DUALSHOCK®2). Only the left and right analog sticks can be used in
analog mode.
Note
Not all PlayStation®2 format software titles support the use of the Analog
Controller (DUALSHOCK®) (SCPH-110 E). The Analog Controller
(DUALSHOCK®2) should be used in such cases.
About using the Analog Controller
(DUALSHOCK ® )(SCPH-110 E)
You can save and load game data using a Memory Card. You can also
delete game data or copy game data from one Memory Card to another.
There are two types of Memory Cards. Select a Memory Card suitable
for the software in use.
About Memory Card types
Using Memory Cards
18 Using Memory Cards
Memory Card type Compatible software Amount of memory
Memory Card (8MB) PlayStation®2 format Approx. 8 MB
(for PlayStation®2) software
(SCPH-10020 E)
Memory Card PlayStation®format 15 memory blocks
(SCPH-1020 E) software (approx. 120 KB)
Note
The Memory Card (8MB) (for PlayStation®2) uses “MagicGate”, a technology that
helps protect copyrighted content through data encryption and hardware
authentication.
is a term of copyright protection technology
developed by Sony Group.
does not guarantee compatibility with other products
bearing the “MagicGate” trademark.

19
Using Memory Cards
Insert the Memory Card into a MEMORY CARD slot on the console
front.
Note
Some software titles designate a specific MEMORY CARD slot to use. Refer to the
instructions supplied with the software for details.
Depending on the software, the procedure for saving or loading may
vary. Refer to the instructions supplied with the software for details.
1 At the Browser screen ( page 35), use the directional buttons
to select the icon for the Memory Card you want to use for
copying or deleting data and then press the button.
2 Select the icon for the data you want to copy or delete, and then
press the button.
Copying or deleting game data
Saving or loading game data
Inserting a Memory Card 3
Select “Copy” or “Delete”, and then press the button.
When copying game data, check that two Memory Cards are
inserted in the console. If you have selected “Delete”, skip to step 5.
4 Select the destination, and then press the button.
5 Select “Yes”, and then press the button.
While copying or deleting data, do not remove the Memory Cards.
6 When copying or deleting is completed, press the button.
Notes
• To view information about a game data item, select the icon for the data and
then press the button to check the details.
• Compatibility between software and Memory Cards:
– You cannot save or copy PlayStation®2 format software to a Memory Card
(SCPH-1020 E).
– You cannot save PlayStation®format game data to a Memory Card (8MB)
(for PlayStation®2). You can, however, copy PlayStation®format game data
from a Memory Card (SCPH-1020 E) to a Memory Card (8MB) (for
PlayStation®2) for storage purposes. Note that such game data cannot be
loaded directly from a Memory Card (8MB) (for PlayStation®2).
GB
Games
MEMORY CARD
Console front

1 Turn on the console and insert the disc ( page 15).
Follow steps 1 to 4 of “Starting a game”.
The track numbers are displayed.
2 Using the directional buttons, select the track number you want
to play and then press the button.
Playback begins.
Notes
• If you turn on the console after inserting a disc, the track numbers are
displayed automatically.
• You can also start playback from the Browser screen ( page 35).
Caution
To play an audio CD recorded in DTS format, you must connect a device
with a DTS decoder to the DIGITAL OUT (OPTICAL) connector ( page
12). Note that an extremely loud noise may be emitted if the device does not
have a DTS decoder or if it is connected to the AV MULTI OUT connector.
Playing a CD
Playing an audio CD
Audio CDs
Using the directional buttons, select the icon for the desired track and
then press the button.
Operating the CD player during playback
20 Playing an audio CD
Icon (button*) Function
.(L1 button) Go to the beginning of the current or previous track
m(L2 button) Fast reverse
M(R2 button) Fast forward
>(R1 button) Go to the beginning of the next track
N(START button) Start playback
X(START button) Pause playback
x(SELECT button) Stop playback
* You can operate directly by pressing the buttons of the Analog Controller
(DUALSHOCK®2).
Note
You can also use the DVD Remote Control (for PlayStation®2) (sold separately).
1 Using the directional buttons, select x and then press the
button.
Playback stops. Press the A(open) button on the console front to
remove the disc.
Ending audio CD playback