Sony WEGA KDE-37XS955 User manual

M aking Video Connections
Your TV includes
several types of video
inputs. Use the inputs
that are available on
your components that
provide the best
video performance, as
described in right.
Remote control (RM -Y1004) (1)
and size AA batteries (2)
AC pow er cord (1)
•AC plug holder (1)
•Cable band (1)
•Cable band screw (1)
•AC cord clamp (1)
Additional Connections
For best audio performance, connect your digital audio components
using either digital optical or digital coaxial audio connections.
Depending on which components are in your system, you may need
to complete additional connections. For example, if you have a
satellite receiver, you’ll need to connect the satellite antenna. If you
have an AV receiver, you’ll need to connect speakers.
Note
The connection diagrams shown in the reverse side are recommendations only; other
possible solutions may exist. Connections that include an AV receiver can often be very
complex, so check your AV receiver’s instruction manual for additional details.
Activating CableCARD™ Service
Before you can use
CableCARD™ service,
you need to insert the
CableCARD™ (supplied
by your cable provider)
and activate the service,
as described in right.
Note
Inserting the CableCARD™ incorrectly may result in permanent damage to the card and the
TV.
MUTING
PICTURE WIDE
FAVORITES
POWER
SAVING SOUND MODE
/TV/SAT ANT
MENU
DISPLAY
TV/
VIDEO
MODE
SAT/
CABLE
POWER
GUIDE
TOP MENU
RESET JUMPMTS/SAP
DVD/
VCR
GUIDE
•See the “Cables Required” chart that appears with the diagram to
determine which cables you’ll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.
•Turn off and unplug all components before making connections.
•If you are connecting a digital cable box, you’ll need a special bi-
directional splitter that’s compatible with your cable box. Contact
your cable provider for details.
•Review the following chart to determine which diagram to use to
connect the components in your system:
KDE-37XS955
KDE-42XS955
KDE-50XS955
Sony Corporation © 2004 Printed in Japan
2-189-525-12 (1)
Quick Setup Guide
Checking the
Supplied Accessories
Programming
the Remote Control
Connecting Your TV
(See reverse side)
Running Initial
Setup
Please follow the steps to setup your TV:
1Checking the
Supplied Accessories
3Running Initial Setup2Connecting Your TV
4Programming the
Remote Control
zzzzzzzz zzzzzzzz zzzzzzzz
1 2 3 4
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by matching the eand Eon
the batteries to the diagram inside the remote control’s battery
compartment.
The remote control is preset to operate Sony brand video equipment.
Sony Equipment Programmable Code Number
DVD/VCR 601 (Sony Dream System)
SAT/Cable 801 (Sony Satellite Receiver)
If you have video equipment other than Sony brand that you want to
control with the TV’s remote control, use the following procedures to
program the remote control.
Note
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
1Press the DVD/VCR (FUNCTION) and RESET
buttons simultaneously, or press the SAT/CABLE
(FUNCTION) and RESET buttons simultaneously.
DVD/VCR and SAT/CABLE buttons flash.
2Press the function button you want to program.
To program a cable box or a satellite receiver
Press SAT/CABLE (FUNCTION).
To program video equipment
Press DVD/VCR (FUNCTION).
3Enter the three-digit manufacturer’s code number
using the 0-9 buttons.
4Press ENT (enter).
5To check if the code number works, aim the TV’s
remote control at the equipment and press DVD/
VCR and/or SAT/CABLE (POWER) that corre-
sponds with that equipment. If it responds, the
programming is completed. If not, try using the
other codes listed for that manufacturer.
Tips
•If more than one code number is listed, try entering them one by
one until you come to the correct code for your equipment.
• If you enter a new code number, the code number you
previously entered at that setting is erased.
5
3
4
1, 2
1
If your product is not w orking properly
DO NOT RETURN TO THE STORE.
For service and technical assist ance
Call our Cust omer Information Service Cent er (Toll Free):
1-800-222-SONY (7669) for US residents.
1-877-899-SONY (7669) for Canadian residents.
A
B
C
D
E
F
For these components See reverse
side
or
or
or
or
•Cleaning cloth (1)
•Operating Instructions (1)
• Quick Setup Guide (1)
• Warranty Card (1)
Best Video
Performance Connector type
HDMI
(High-Definition
Multimedia Interface)
Component video
SVIDEO
Composite video
RF/Coaxial
R-AUDIO -L
R-AUDIO -L
VIDEO
S VIDEO
4
(MONO)
HD/DVD IN
(1080i/720p/480p/480i)
5
YP B P R
CableCARD
R-AUDIO -L
HD/DV
D
(1080i/720p/4
8
Y
CableCARD
M anufacturer’s Codes
DVD Players
M anufacturer Code
Sony 751
General Electric 755
Hitachi 758
JVC 756
Magnavox 757
Mit subishi 761
Panasonic 753
Philips 757
Pioneer 752
RCA/PROSCAN 755
Samsung 758
Toshiba 754
Zenith 760
DVD Changers
M anufacturer Code
Sony 765
Panasonic 766
DVD/ VCR Combo Units
M anufacturer Code
Sony 767
Zenith 768
Toshiba 773
Samsung 774
JVC 775
Broksonic 776
Panasonic 777
HDD/ DVD Combo Units
M anufacturer Code
Sony 770, 771, 772
5.1ch DVD AV System
M anufacturer Code
Sony (DAV) 601, 602, 603, 604
AV Receivers
M anufacturer Code
Sony 764
VCRs
M anufacturer Code
Sony 301, 302, 303
Admiral (M . Ward) 327
M anufacturer Code
Aiwa* 338, 344
Audio Dynamic 314, 337
Broksonic 319, 317
Canon 309, 308
Citizen 332
Craig 302, 332
Curtis Mathes 304, 338, 309
Daewoo 341, 312, 309
DBX 314, 336, 337
Dimensia 304
Emerson 319, 320, 316, 317,
318, 341
Fisher 330, 335
Funai 338
General Electric 329, 304, 309
Go Video 322, 339, 340
Goldstar 332
Hitachi 306, 304, 305, 338
Instant Replay 309, 308
JC Penney 309, 305, 304, 330,
314, 336, 337
JVC 314, 336, 337, 345,
346, 347
Kenwood 314, 336, 332, 337
LG 332
LXI (SEARS) 332, 305, 330, 335,
338
Magnavox 308, 309, 310
Marant z 314, 336, 337
Mart a 332
Memorex 309, 335
Minolt a 305, 304
Mit subishi/MGA 323, 324, 325, 326
Mult it ech 325, 338, 321
NEC 314, 336, 337
Olympic 309, 308
Optimus 327
Orion 317
Panasonic 308, 309, 306, 307
Pentax 305, 304
Philco 308, 309
Philips 308, 309, 310
Pioneer 308
Quasar 308, 309, 306
RCA/PROSCAN 304, 305, 308, 309,
311, 312, 313, 310,
329
Realistic 309, 330, 328, 335,
324, 338
Sansui 314
Samsung 322, 313, 321
Sanyo 330, 335
M anufacturer Code
Scott 312, 313, 321, 335,
323, 324, 325, 326
Sharp 327, 328
Signature 2000 (M .Ward) 338, 327
SV 2000 338
Sylvania 308, 309, 338, 310
Symphonic 338
Tashiro 332
Tat ung 314, 336, 337
Teac 314, 336, 338, 337
Technics 309, 308
Toshiba 312, 311
Wards 327, 328, 335, 331,
332
Yamaha 314, 330, 336, 337
Zenith 331
Cable Boxes
M anufacturer Code
Sony 230
Hamlin/Regal 222, 223, 224, 225,
226
Jerrold, G.I. 201, 202, 203, 204,
205, 206, 207, 208,
218, 222
Oak 227, 228, 229
Panasonic 219, 220, 221
Pioneer 214, 215
Scientif ic At lanta 209, 210, 211
Tocom 216, 217
Zenith 212, 213
Satellite Receivers
M anufacturer Code
Sony 801
Dish Network 810
Echostar 810
General Electric 802
Hitachi 805
Hughes 804
Mit subishi 809
Panasonic 803
RCA/PROSCAN 802, 808
Toshiba 806, 807
*If an Aiwa VCR does not
work even though you enter
the code for Aiwa, enter the
code for Sony instead.
KDE-37/ 42XS955 KDE-50XS955
1Press POWER to turn on the TV.
The Initial Setup screen appears.
2Press Vor vto select the on-screen display language. Then press .
The message “Start auto program now?” appears.
3Press Vor vto select “Yes”, then press .
Auto Program automatically creates a list of receivable channels.
When finished, the lowest numbered channel is displayed.
To run Auto Program again at a later time
sUse the Auto Program feature in the operating instructions.
To add individual digital channels
sUse the Digital Channels feature in the operating instructions.
Note
Auto Program may take up to 50 minutes or more to complete.
A progress bar is displayed while the channel list is being created.
Downloaded from: https://www.usersmanualguide.com/

A B C
DEF
R-AUDIO -L
R-AUDIO -L
R-AUDIO -L R-AUDIO -L
VIDEO
S VIDEO
CENTER SPEAKER IN
CONTROL S
IN OUT
VIDEO IN 1
6
4
(MONO)
HD/DVD IN
(1080i/720p/480p/480i)(VAR /FIX)
180W ( 6
)MAX
AUDIO OUT
(VAR )
SUBWOOFER OUT
5
YPBPR
3
CABLE
VHF/UHF
DVD Player
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
OUT
IN
Cable Box or
Satellite Receiver
Splitter
Cable Rear of TV
Use this diagram if you have;
or
Cables Required
Split ter 1
Coaxial 5
Composite 2
Component 1
Audio 1
If you are not using
a cable box or
sat ellit e receiver,
connect your cable
or antenna to the
VCR’s RF IN jack.
If your DVD player or sat ellite
receiver has a HDMI jack, use that
instead of t he video connections
shown here.
R-AUDIO -L
R-AUDIO -L
R-AUDIO -L R-AUDIO -L
VIDEO
S VIDEO
CENTER SPEAKER IN
CONTROL S
IN OUT
VIDEO IN 1
6
4
(MONO)
HD/DVD IN
(1080i/720p/480p/480i)(VAR/FIX)
180W ( 6
)MAX
AUDIO OUT
(VAR )
SUBWOOFER OUT
5
YPBPR
3
CABLE
VHF/UHF
DVD Player
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
OUT
IN
Splitter
Cable
R
L
INPUT DVD VCR TV
LINE IN
VIDEO
VIDEO
OUT
AUDIO
OUT
A/V
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
RL
Digital Recorder
Cable Box or
Satellite Receiver
Rear of TV
Use this diagram if you have;
or
Cables Required
Split ter 1
Coaxial 5
Composite 4
Component 1
Audio 2
If you are not using
a cable box or
sat ellit e receiver,
connect your cable
or antenna to the
VCR’s RF IN jack.
If your DVD player
or satellit e receiver
has a HDMI jack, use
that inst ead of the
video connect ions
shown here.
R-AUDIO -L
R-AUDIO -L
R-AUDIO -L
VIDEO
S VIDEO
VIDEO IN 1
6
4
(MONO)
HD/DVD IN
(1080i/720p/480p/480i)
5
YPBPR
3
R-AUDIO -L
CENTER SPEAKER IN
CONTROL S
IN OUT
(VAR /FIX)
180W ( 6
)MAX
AUDIO OUT
(VAR )
SUBWOOFER OUT
CABLE
VHF/UHF
DVD Player
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
OUT
IN
R
L
INPUT DVD VCR TV
LINE IN
VIDEO
VIDEO
OUT
AUDIO
OUT
A/V
Cable Box or
Satellite Receiver
Splitter
Cable
Rear of TV
Use this diagram if you have;
or
Cables Required
Split ter 1
Coaxial 5
Composite 3
Component 1
Audio 2
If your DVD player or
sat ellit e receiver has a HDMI
jack, use that inst ead of t he
video connections shown
here.
If you are not using
a cable box or
sat ellit e receiver,
connect your cable
or antenna to the
VCR’s RF IN jack.
R-AUDIO -L
R-AUDIO -L
R-AUDIO -L R-AUDIO -L
VIDEO
S VIDEO
CENTER SPEAKER IN
CONTROL S
IN OUT
VIDEO IN 1
6
4
(MONO)
HD/DVD IN
(1080i/720p/480p/480i)(VAR /FIX)
180W ( 6
)MAX
AUDIO OUT
(VAR )
SUBWOOFER OUT
5
YPBPR
3
CABLE
VHF/UHF
DVD Player
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
Splitter
Cable
High Definition
Cable Box
OUT
IN
Rear of TV
Use this diagram if you have;
Cables Required
Split ter 1
Coaxial 5
Composite 2
Component 1
HDMI 1
Audio 1
If your cable box has
a DVI jack, use that
instead of t he video
connections shown
here.
R-AUDIO -L
R-AUDIO -L
R-AUDIO -L R-AUDIO -L
VIDEO
S VIDEO
CENTER SPEAKER IN
CONTROL S
IN OUT
VIDEO IN 1
6
4
(MONO)
HD/DVD IN
(1080i/720p/480p/480i)(VAR/FIX)
180W ( 6
)MAX
AUDIO OUT
(VAR )
SUBWOOFER OUT
5
YPBPR
3
CABLE
VHF/UHF
DVD Player
LINE OUT
AUDIO VIDEO
RL
Satellite
Receiver
SAT IN
ANT IN
CABLE IN
OUT TOTV
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
OUT
IN
Cable Box
Splitter
Cable
Satellite
Antenna
Cable
Rear of TV
Cables Required
Split ter 1
Coaxial 7
Composite 3
Component 1
HDMI 1
Audio 1
Use this diagram if you have;
If your DVD player or satellit e receiver
has a HDMI jack, use t hat instead of
the video connections shown here.
If you are not
using a cable box,
connect your cable
or antenna to the
VCR’s RF IN jack.
R-AUDIO -L
R-AUDIO -L
R-AUDIO -L R-AUDIO -L
VIDEO
S VIDEO
CENTER SPEAKER IN
CONTROL S
IN OUT
VIDEO IN 1
6
4
(MONO)
HD/DVD IN
(1080i/720p/480p/480i)(VAR/FIX)
180W ( 6
)MAX
AUDIO OUT
(VAR )
SUBWOOFER OUT
5
YPBPR
3
VHF/UHF
CABLE
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
OUT
IN
Cable Box or
Satellite Receiver
Sony Dream System
VIDEO 1
COMPONENT VIDEO OUT
VIDEO 2
AUDIO OUT
AUDIO IN
LR LR
LR
VIDEO OUT
VIDEO IN
VIDEO INAUDIO IN
Y P B /C B P R /C R
MONITOR OUT
S VIDEO
Splitter
Cable
Rear of TV
Use this diagram if you have;
or
Cables Required
Split ter 1
Coaxial 5
Composite 2
Composite 1
(without Audio)
Component 1
If you are not using a
cable box or satellite
receiver, connect your
cable or antenna to
the VCR’s RF IN jack.
If your DVD player or sat ellite receiver
has a HDMI jack, use t hat instead of t he
video connections shown here.
Downloaded from: https://www.usersmanualguide.com/

This file has been downloaded from:
www.UsersManualGuide.com
User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes..
Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide,
manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product,
documentation manual, user maintenance, brochure, user reference, pdf manual
Downloaded from: https://www.usersmanualguide.com/