Sony KZ-32TS1E User manual

Quick Start Guide
©2002 by Sony Corporation
Ecological Paper - Totally Chlorine Free
4-088-928- 01 (1)
Printed in Spain
Make sure you insert the supplied batteries using the correct polarity.
Always remember to dispose of used batteries in an environmentally friendly way.
• Use the supplied AC cable (type BF, with safety earth).
• Use the supplied coaxial cable for aerial connection.
• Other connecting cables are not supplied.
• The Scart lead is optional, however if you use a Scart lead to connect your VCR it can
improve picture and sound quality when using it.
• For more details of VCR connection, please refer to the section “Connecting Optional
Equipment” on page 28 of the instruction manual.
If you do not have a Scart lead, after automatically tuning the TV, tune in the VCR test
signal to the TV programme number “0” by using the “Manual Programme Preset”
option. (for details of how to manually programme these presets, see page 22, step A of
the instruction manual).
Refer to your VCR instruction manual to find out how to find the output channel of your
VCR.
One Remote Control (RM-932): Two batteries (R6 Type):
Two Brackets:
One coaxial cable: One Cleaning cloth:
One AC Cable (Type C):
Use this AC cable (with safety earth) if
you use the set outside the United
Kingdom.
One AC Cable (Type BF):
• Use this AC cable (with safety earth) if
you use the set in the United
Kingdom.
• See “NOTICE FOR CUSTOMERS IN
THE UNITED KINGDOM” on page 2
of the instruction manual when using
the cable.
• This cable may not be supplied
depending on the country.
Do not remove ferrite cores.
Do not remove ferrite cores. Do not remove ferrite cores.
L/G/S/IR/D/D/D
L/G/S/I
(SMARTLINK)
R/D/D/D Y/G P B/ C B/ BP R/ C R/ RHD VD
L/G/S/I
R/D/D/D
CTRL S
(W/G/W/G)
AC IN
L/G/S/IR/D/D/D
L/G/S/I
(SMARTLINK)
R/D/D/D Y/G P B/ C B/ BP R/ C R/ RHD VD
L/G/S/I
R/D/D/D
CTRL S
(W/G/W/G)
AC IN
OUT IN
or
VCR
Connect the supplied AC
cable (Type BF, with
safety earth).
Connect the supplied
cosxial cable.
Inserting Batteries into
the Remote Control
Thank you for purchasing this Sony
product.
After following this step by step guide
you will be able to:
Insert Batteries into the Remote
Control.
Connect the AC Cable, Aerial and VCR
to your TV.
Select the language of the menu
screens.
Select the country in which you wish to
operate the set.
Tune your TV.
Change the broadcast channels into a
different order.
View TV Programmes.
Attach the supplied bracket to the rear of the TV, and pass a sturdy cord or chain through
it to attach it to a wall or pillar. Consult your dealer when attaching the bracket, since the
screws for the bracket also hold the rear cabinet in a place.
1
Remove one of the screws attached at
the rear of the TV.
Do not remove both screws at the
same time as these screws secure
the rear cabinet. Never use the TV
with the screws removed.
2 Attach the supplied bracket with the
screw.
Be sure to use the screw that
attaches the rear cabinet. A different
screw may damage the TV and
result in electric shock.
3 Repeat steps 1 and 2 to attach the other bracket.
4
Attach a sturdy cord or chain securely to
each bracket on the rear of the TV.
5
Fix the cord or chain to a wall or pillar.
Bracket
(supplied)
Attach the
sturdy cord
or chain
(not supplied)
securely.
Screw a hook (not supplied) to the wall or
pillar securely.
Side view Rear view
Connecting the AC
Cable, Aerial and VCR
Checking the
Accessories Supplied
KZ-32TS1E
KZ-42TS1E
34
2
Preventing the TV
from Falling Down
1
GB

Your television stations are now stored in your television’s memory.
1
Connect the plug to the mains socket (220-240V AC,
50Hz).
2
Press the Power switch on the TV set to turn on
the TV.
The first time you press the Power switch, a Language menu
displays automatically on the TV screen.
1 Press the or button on the
remote control to select the language,
then press the OK button to confirm
your selection.
From now on all the menus will appear
in the selected language.
2
The Country menu appears
automatically on the TV screen.
Press the or button to select the
country in which you will operate the
TV set, then press the OK button to
confirm your selection.
• If the country in which you want
to use the TV set does not appear
in the list, select “-” instead of a
country.
• In case of changing the country
selection (including “-”), the
next procedure of Auto Tuning
always should be done after that.
The Auto Tuning menu appears on the TV
screen.
/
TVVIDEO
DVDVCR
123
456
789
0
OK
PROG
TV
MENU REC
Language
Engl
Españo l
Italiano
Français
Por t uguês
Deutsch
Neder l ands
ish
Select language
Coun t r y
Select country
—
United Kingdom
France
España
Italia
Portugal
Nederland
Deutschland
Do y o u
Ye s
No
automatic tuning?
want to start
m
m
1
Press the OK button on the remote
control to select Yes .
2
The TV starts to automatically search
and store all available broadcast
channels for you.
This procedure could take some
minutes.
Please be patient and do not press
any buttons while the auto tuning
is in progress, otherwise the auto
tuning will not be completed.
If no channels were found during
the auto tuning process then a
new menu appears automatically
on the screen asking you to
connect the aerial. Please connect
the aerial (refer to the step 3) and
press OK . The auto tuning
process will start again.
When the auto tuning is finished, the
Programme Sorting menu appears on
the screen.
/
TVVIDEO
DVDVCR
123
456
789
0
OK
PROG
TV
MENU REC
Auto Tuning
Conf
Programme
Searching. . .
:
Channel :
System :
01
C21
I
Programme Sorting
01
02
03
04
05
06
07
08
TVE
TVE2
TV3
C33
C27
C58
S02
S06
Select
Exit :
channel
MENU
,to select, ,to set
OK
Do y o u
Ye s
No
automatic tuning?
want to start
No channel found.
Conf i rm
Please connect aer i al
m
m
a) If you wish to keep the broadcast channels
in the tuned order:
Press the MENU button on the remote
control to exit and return to the normal
TV screen.
Your set is now ready for use.
b) If you wish to store the broadcast
channels in a different order:
1
Press the or button to select the
programme number with the channel
(TV Broadcast) you wish to rearrange,
then press the button.
2
Press the or button to select the
new programme number position for
your selected channel (TV
Broadcast), then press .
The selected broadcast channel
now moves to its new programme
position and the other broadcast
channels move
accordingly.
3
Repeat steps 1) and 2) if you wish to
change the order of the other channels.
4
Press the MENU button on the remote
control to exit and return to the normal
TV screen.
The TV set is now ready for use.
/
TVVIDEO
DVDVCR
123
456
789
0
OK
PROG
TV
MENU REC
Programme Sorting
01
02
03
04
05
06
07
08
TVE
TVE2
TV3
C33
C27
C58
S02
S06
Select
Exit :
channel
MENU
,to select, ,to set
OK
Programme Sorting
01
02
03
04
05
06
07
08
TVE
TVE2
TV3
C33
C27
C58
S02
S06
Select
Exit :
channel
MENU
,to select, ,to set
OK
Programme Sorting
01
02
03
04
05
06
07
08
TVE
TVE2
TV3
C33
C27 01 TVE
C58
S02
S06
Select
Exit :
new position
MENU
, to select, press to return
OK
m
Changing the Programme Order
of the broadcast channels
By following the instrutions below, you can rearrange the
order in which the broadcast channels appear on the screen
75
Automatically Tune the TV
You need to tune the TV to receive channels
(TV Broadcast).
By following the instructions below, this set automatically
searches and stores all available channels for you.
6
Selecting the language of the
menu screens and the country
This TV set works with menu screens. By following the
instructions below, you can select the desired language
of the menu screens and the country in which you
wish to operate the TV set.
Switching on the set
8