Sony KP-6lHS20 User manual

SONY@
4-081-143-11(l)
KP-43HT20KP-43HT20
KP-53HS20KP-53HS20
KP-53HS30KP-53HS30
KP-6lHS20KP-6lHS20
KP-61HS30KP-61HS30
02001 Sony Corporation

WARNING
To prevent fire or shock hazard, do not
expose the projection TV to rain or
moisture.
A-ITENTION
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR A I
PRECAUCION ’
RIESGO DE CHOQUE ELECTRIC0
NO ASRIR
CAUTION : TO REDUCE THE RlSK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
3EFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
A
This symbol is intended to alert the user to the
presenceof uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
n I This symbol is intended to alert the userto the
. presenceof important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION
To preventelectric shock, do not usethis polarized AC
plug with an extension cord, receptacle or other outlet
unlessthe bladescan be fully inserted to prevent blade
exposure.
CAUTION
When using TV games, computers, and similar
products with your projection TV, or viewing a
TV station whose logo always stays on the
screen, keep the brightness and contrast
functions at low settings. If a fixed (non-moving)
pattern such asa station logo is left on the screen
for long periods of time, especially at a high
brightness or contrast setting, the image can be
permanently imprinted onto the screen. These
types of imprints are not covered by your
warranty.
Note on Caption Vision
This television receiver provides display of television
closed captioning in accordancewith $15.119 of the FCC
rules.
Note to CATV system installer
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry aspractical.
Use of this television receiver for other than private
viewing of programs broadcast on UHF, VHF,
transmitted by cable companies or satellite for the useof
the general public may require authorization from the
broadcaster/cable company and/or program owner.
NOTIFICATION
This equipment hasbeentestedand found to comply with
the limits for a Class B digital device pursuant to Part 15
of the FCC Rules. These limits aredesigned to provide
reasonableprotection against harmful interference in a
residential installation. This equipment generates,uses,
and can radiate radio frequency energy and, if not
installed and usedin accordancewith the instructions,
may causeharmful interference with radio
communications. However, there is no guaranteethat
interference will not occur in aparticular installation. If
this equipment doescauseharmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
Cl Reorient or relocate the receiving antennas.
Cl Increase the separation between the equipment and
receiver.
Cl Connect the equipment into an outlet on acircuit
different from that to which the receiver is
connected.
Cl Consult the dealer or an experienced radio/TV
technician for help.
modifications not expressly approved in
your authority to operate this equipment.
This document is for the remote control RM-Y908.
MODELS: KP-43HT20, KP-53HS20, KP-53HS30,
KP-61HS20, KP-61HS30
Pleasekeep this notice with the instruction manual.

Safety
Cl Operate the projection TV only on 120V AC.
Cl The plug is designed, for safety purposes,to lit into
the wall outlet only one way. If you are unable to
insert the plug fully into the outlet, contact your
dealer.
Cl If any liquid or solid object should fall inside the
cabinet, unplug the projection TV immediately and
have it checked by qualified service personnel
before operating it further.
0 If ygu will not be using the projection TV for several
days, disconnect the power by pulling the plug itself.
Never pull on the cord.
For details concerning safety precautions, see
“Important Safeguards” on page4.
Installing
To prevent internal heat buildup, do not block the
ventilation openings.
Do not install the projection TV in ahot or humid
place, or in a place subject to excessivedust or
mechanical vibration.
Avoid operating the projection TV at temperature
below 5°C (41“F).
If the projection TV is transported directly from a
cold to a warm location, or if the room temperature
changessuddenly, the picture may be blurred or
show poor color. In this case,pleasewait afew hours
to let the moisture evaporatebefore turning on the
projection TV.
To obtain the best picture, do not exposethe screen
to direct illumination or direct sunlight. It is
recommended to use spot lighting directed down
from the ceiling or to cover the windows that face
the screenwith opaque drapery. It is desirable to
install the projection TV in a room where the floor
and walls are not of a reflective material.
guidelines for energy efficiency.
Note on convergence adjustment
Before you useyour projection TV, make sure to adjust
convergence.For details, see“Adjusting the Convergence
Automatically - FLASH FOCUSrM -” on page 33.
TruStmound is a trademark of
SRS Labs, Inc. SRS and the SRS
symbol are registered trademarks
of SRS Labs, Inc. in the-united Statesand selected
foreign countries. SRS andTruStmound are incorporated
under license from SRS Labs, Inc. and is protected under
United StatesPatentNos. 4,748,669 and4, 841,572 with
numerous additional issued and pending foreign patents.
Purchaseof this product does not convey the right to sell
recordings made with the TruStmound technology.
BBE and BBE Symbol aretrademarks of BBE Sound,
Inc. and are licensed by BBE Sound, Inc. under U.S.
Patent No. 4,638,258 and4,482,866.
ATTENTION
Pour prevenir les chocs Clectriques, ne pasutiliser cette
fiche polarisee avecun prolongateur, uneprise decourant
ou une autre sortie de courant, sauf si les lames peuvent
tre insereesafond sansen laisser aucunepartie a
decouvert.
Owner’s Record
The mode1and serial numbers are located at the rear of
the projection TV, below the Sony logo, on the sticker,
and also on the TV box (white label). Record these
numbers in the spacesprovided below. Refer to them
whenever you call upon your Sony dealer regarding this
product.
Mode1No.
Serial No.
ENERGY STAR@is a U.S. registered mark.
3

Important Safeguards
For your protection,pleaseread theseinstructions
completely, andkeepthis manual for future reference.
Carefully observeandcomply with all warnings, cautions
and instructionsplacedon the set or described in the
operating instructionsor service manual.
WARNING
To guard againstinjury, the following basic safety
precautionsshouldbe observed in the installation, use
and servicingof the set.
Use
Power Sources
This setshouldbeoperated only from
the typeof power sourceindicated on
the serial/modelplate. If you arenot sure
of thetypeof electrical power supplied
to your home,consult your dealer or
local powercompany.For those setsdesigned to operate
from batterypower, refer to the operating instructions.
Grounding or Polarization
This setis equippedwith a polarized AC power cord plug
(aplug having oneblade wider than the other), or with a
three-wire grounding type plug (a plug having a third pin
for grounding). Follow the instructions below:
For the set with a polarized AC power cord
plug
This plug will fit into the power outlet
only oneway. This is asafety feature. If
you areunableto insert the plug fully %f!%
into the outlet, try reversing the plug. If
the plug still fails to fit, contact your electrician to have a
suitableoutlet installed. Do not defeat the safety purpose
of the polarized plug by forcing it in.
Alternate Warning for the set with a three-
wire grounding type AC plug
This plug will only tit into a grounding-
type power outlet. This is asafety
feature. If you areunable to insert the
plug into the outlet, contact your
electrician to havea suitable outlet
installed. Do not defeat the safety purpose of the
grounding plug.
Overloading
Do not overload wall outlets, extension
cords or convenience receptacles
beyond their capacity, since this can
result in fire or electric shock.
Always turn the setoff when it is not
being used.When the set is left
unattended and unusedfor long
periods of time, unplug it from the
wall outlet asaprecaution against the
possibility of an internal malfunction that could create a
fire hazard.
If asnapping or popping sound from aTV
set is continuous or frequent while the TV ,,& +,
is operating, unplug the TV and consult
your dealer or service technician. It is
normal for some TV setsto make
occasional snapping or popping sounds,
particularly when being turned on or off.
Object and Liquid Entry
Never push objects of any kind into the
setthrough the cabinet slots asthey may
touch dangerous voltage points or short
out parts that could result in a fire or
electric shock. Never spill liquid of any
kind on the set.
Attachments
Do not useattachments not
recommended by the manufacturer, as
they may causehazards.
Cleaning 4
Clean the cabinet of the projection TV
with a dry soft cloth. To remove dust
from the screen,wipe it gently with a soft a
cloth. Stubborn stains may be removed
with a cloth slightly dampenedwith
solution of mild soapand warm water. Never usestrong
solvents such asthinner or benzine for cleaning.
If the picture becomesdark after using the projection TV
for a long period of time, it may be necessaryto clean the
inside of the projection TV Consult qualified service
personnel.
4

Installation
Power-Cord Protection
Water and Moisture
Do not usepower-line operated sets
near water - for example, near a
bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement,or
near a swimming pool, etc.
Do not allow anything to rest on or roll
over the power cord, and do not place the
set where the power cord is subject to
wear or abuse.
Antennas
Outdoor Antenna Grounding
If an outdoor antennais installed, follow the precautions
below. An outdoor antenna system should not be located
in the vicinity of overhead power lines or other electric
light or power circuits, or where it can come in contact
with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA
SYSTEM, EXTREME CARE SHOULD BE TAKEN TO
KEEP FROM CONTACTING SUCH POWER LINES
OR CIRCUITS AS CONTACT WITH THEM IS
ALMOST INVARIABLY FATAL.
Accessories
Do not p&e the set on an unstable
cart, stand, table or shelf. The set
may fall, causing serious injury to a
child or an adult and serious damage
to the set. Use only a cart or stand
recommended by the manufacturer
for the specific model of projection
TV. An appliance and cart
combination should be moved with
care. Quick stops,excessiveforce,
and uneven surfacesmay causethe appliance and cart
combination to overturn.
Ventilation
The slots and openings in the cabinet and in the back or
bottom areprovided for necessaryventilation. To ensure
reliable operation of the set, and to protect it from
overheating, theseslots and openings must never be
blocked or covered.
Never cover the slots and openings
with acloth or other materials.
Never block the slots and openings by
placing the set on abed, sofa, rug or
other similar surface.
Never place the setin aconfined
space,such asabookcase or built-in
cabinet, unless proper ventilation is
provided.
Do not place the setnear or over a
radiator or heatregister, or where it is
exposedto direct sunlight.
Be surethe antenna system is grounded so asto provide
someprotection against voltage surgesandbuilt-up static
charges.
Section 810 of the National Electrical Code (NEC) in
USA and Section 54 of the Canadian Electrical Code in
Canadaprovides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antennadischarge
unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Antenna Grounding According to the NEC
Refer to section 54-300 of Canadian Electrical Code for
Antenna Grounding.
Antenna lead-in wire
Antenna lead-in wire
(NEC Section 810-20)
Grounding conductors
(NEC section 810-21)
NEC: National
Electrical Code
er service grounding
electrode system (NEC Art
250 Part H)
5

Lightning Safety Check
For addedprotection for this television receiver during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet
and disconnectthe antenna.This will prevent damageto
the receiver dueto lightning and power-line surges.
Service
Damage Requiring Service
Unplug the setfrom the wall outlet andrefer servicing to
qualified servicepersonnel under the following
conditions:
Upon completion of any service or repairs
to the set, ask the service technician to
perform routine safety checks (as specified
by the manufacturer) to determine that the
set is in safeoperating condition, and to so
certify. When the setreachesthe end of its
useful life, improper disposal could result
in apicture tube implosion. Ask aqualified
service technician to dispose of the set.
cl
cl
0
cl
cl
0
When the power cord or
plug is damagedor frayed.
If liquid hasbeenspilled into
the set.
If the sethasbeenexposed
to rain or water.
If the sethasbeen subject to
excessiveshock by being
dropped, or the cabinet has
beendamaged.
If the setdoesnot operate ’
normally when following the
operating instructions.
Adjust only thosecontrols
that are specified in the
operating instructions.
Improper adjustment of
other controls may result in
damageand will often
require extensive work by a
qualified technician to restore the setto normal
operation.
When the setexhibits a distinct changein
performance, it indicates a need for service.
Servicing
Do not attempt to service the setyourself
sinceopening the cabinet may exposeyou to
dangerousvoltage or other hazards.Refer all
servicing to qualified service personnel.
Replacement Parts
When replacement parts are required, be surethe service
technician certifies in writing that he hasused
replacementparts specified by the manufacturer that have
the samecharacteristics asthe original parts.
Unauthorized substitutions may result in fire, electric
shock or other hazards.
For Safety
Be careful when moving
the projection TV
When you place the projection TV
in position, be careful not to drop it
on your foot or lingers.
Watch your footing while installing the projection TV
Carry the projection TV in the
specified manner
If you carry the projection TV in amanner ,,
other than the specified manner and
without the specified number of persons,it
may drop and a serious injury may be
caused.Be sure to follow the instructions mentioned
below.
0 Carry the projection TV with the specified number
of persons. (seepage 10)
0 Do not carry the projection TV holding the speaker
grill.
Cl Hold the projection TV tightly when carrying it.
6

Contents
Introducing the Sony Projection TV
Presenting the Sony Projection TV ..........................8
Using this manual ....................................................9
lnstakng and Connecting the
Projection TV
Contents
.................................................................
10
Inserting Batteries into the Remote Control ..........10
Carrying Your Projection TV ............................... .I0
Installing the Projection TV..
.................................
1
1
Connector Types ................................................... .12
Projection TV Controls and Connectors.. ..............13
Basic Connections (Connecting Cable TV or
Antenna)......................................................... 16
Connecting a VCR and Cable.. .............................. I9
Connecting a VCR and Cable Box ....................... .20
Connecting Two VCRs for Tape Editing ..............22
Connecting a Satellite Receiver.. .......................... .23
Connecting a Satellite Receiver with a VCR.........2 4
Connecting an Audio Receiver.. ........................... .25
Connecting a DVD Player with Component
Video Connectors ......................................... .26
Connecting a DVD Player with
A/V Connectors ............................................ .27
Connecting aDigital TV Receiver........................ .28
Connecting aCamcorder ...................................... .29
Connecting an AV Receiver ................................. .30
Using the CONTROL S Feature........................... .31
Setting Up the Projection TV Automatically.........3 2
Adjusting the Convergence Automatically
- FLASH FOCUSrM - . .... . ........................... 33
Using the Features
Using the Remote Control .................................... .34
Watching the TV.. ................................................. .37
Watching the Digital TV ...................................... .39
Using Favorite Channels..
..................................... .40
Using Twin ViewTM.............................................. .41
Using the FreezeFunction.. .................................. .44
Using Channel Index ............................................ .45
Using the Menus
Overview.. ............................................................. .47
Using the Video Menu.. ....................................... .48
Using the Audio Menu....................... .
..................50
Using the Channel Menu ..................................... .52
Using the Parent Menu ........................................ .54
Using the Timer Menu.. ....................................... .62
Using the Setup Menu ......................................... .63
Other Information
Programming the Remote Control.. ...................... .65
Operating Other Components with Your
Projection TV Remote Control.. ................... .68
Troubleshooting.. .................................................. .70
Specifications.. ...................................................... .73
7

Presenting the Sony Projection TV
Thank you for purchasing the Sony Projection TV.
This manual is for models KP-43HT20, KP-53HS20, KP-53HS30, KP-
61HS20 and KP-61HS30.
Model KP-53HS30 is usedfor illustration purposes.
Features Someof the featuresthat you will enjoy with your new projection TV
include:
0
0
0
0
0
0
0
0
0
Hi Scan 1080TM:Enablesyou to receive the lOSOi,72Op,480~ and480i
digital TV formats. By using the VIDEO 5/6 IN jacks, you canconnect
aDTV (digital television) receiver to view DTV programs.
DRCTMMulti-Function: Unlike conventional line doublers, the DRC
feature doubles vertical andhorizontal lines, resulting in four times the
density for quality sourcessuchasDVD, Satellite andDigital
camcorder.
CineMotionrM: Using the 2-3 Pull-Down technology, the CineMotion
feature allows you to obtain a smooth picture movement when playing
back movies or other video sourceson film.
Twin ViewTM:Using Multi-Image Driver (MID-X), Twin View allows
you to watch two programs sideby sidewith the ability to zoom in on
onepicture and listen to the program in the selectedwindow. You can
watch pictures from two different sources(lOSOi,72Op,480~ or 48Oi)
simultaneously.
16:9 Enhancement: Vertical Compression technology that maximizes
picture resolution on “anamorphic” or “enhanced for wide screen”
sources,including selectedDVDs.
Steady SoundTM:
Equalizes volume levels sothere is consister$output
.
betweenprograms andcommercials.
Parental Control: V-Chip technology allows parentsto block
unsuitable programming for younger viewers.
Component Video Inputs: Offers the bestvideo quality for DVD
(48Op,48Oi) andDigital Set-topbox (lOSOi,72Op,48Op,480i)
connections.
S-VIDEO Inputs: Provides a high-quality image for connected
equipment.

Introducing the Sony Projection TV
Cl Favorite Channel Preview: Preview up to eight favorite channels
without leaving the current channel. 5
0 Channel Index: Allows you to view andchoosefrom twelve programs. ‘:
8
R Flash FocusTM:Allows you to adjust convergenceautomatically. c
2.
3
3
Using this manual
We recommend that you carefully review the contentsof thefollowing three
sectionsin the order shown to ensurethat you fully understandtheoperation 3
3
of your new projection TV. 3
1 Installing andConnecting the Projection TV 2
This section guides you through your initial setup.It showsyou how to 3
install your projection TV, to connect your new componentsandto connect
the antennaandcable.
2 Using the Features
This section shows you how to begin using your new projection TV. It also
showsyou how to useyour remote control functions.
3 Using the menus
This section teachesyou how to accesson-screenmenusandadjust your
projection TV settings.
Instructions in this manual arewritten for the remote control. Similar
controls arealso found on the projection TV console.
9

Contents
The box contains your new projection TV, aremote control andtwo AA
batteries.No peripheral cablesare included. If you intend to add additional
equipment to your projection TV, pleasecheck the hookup instructions for
your desired setupbefore you begin. You may needto purchasecablesand1
or splitters to complete the hookup properly.
Inserting Batteries into the Remote Control
Insert two sizeAA (R6) batteries(supplied) by matching the + and- on the
batteriesto the diagram inside thebattery compartment.
Carrying Your Projection TV
Carrying the projection TV requires three or more people.
The projection TV hasbeenequipped with castersfor easymovement on a
hard surface.(for KP-53HS20, KP-53HS30, KP-61HS20 and KP-61HS30
only)
Pleasemove your projection TV using the casters.
10

Installing and Connecting the Projection TV
Installing the Projection TV
Recommended
viewing area
(Horizontal)
Recommended
viewing area
(Vertical)
11

Installing and Connecting the Projection TV
Connector Types
You may find it necessaryto usesomeof the following connector types
during setup.
Coaxial cable
StandardTV cable andantennacable
ml Type
Push into connection.
Screw-on Type Screw into connection.
S Video cable
High quality video cable for enhancedpicture quality
@ fn:iog;w;uid=z;ppush
AudioNideo cable
a Push into connection.
Video - Yellow
Audio (Left) - White
Audio (Right) - Red
SomeDVD Players areequipped with the following threevideo connectors:
Y - Green
Ps(CB,Cbor B-Y) - Blue
PR(CR,Cror R-Y) - Red
CONTROL S cable
CONTROL S connections areexclusive to Sony products andallow greater
control of all Sony equipment.
m Push into connection.
12

Installing and Connecting the Projection TV
Projection TV Controls and Connectors
Front Panel Menu
Con fro/s
The front panel menu controls allow accessto the on-screenmenus without
the useof a remote control. Pressing MENU brings up the on-screenmenus. 3
The arrow buttons move the on-screencursor in the menusand the Select g
2
s
button (-i-) selectsthe menu item.
POWER
I I
13

Installing and Connecting the Projection TV
Projection TV Rear
and Front/Side
Panel Connectors
Rear of projection TV
I I I II
"lOEOf~VlDEO31VlDEO~ "lOEO5lj VIDEO6
r!l
6
Front or side of projection TV
KP-43HT20
KP-53HS20, KP-53HS30,
KP-61 HS20 and KP-61 HS30
14

Installing and Connecting the Projection TV
Connection
q AUX
q TO CONVERTER
q VHF/UHF
q S VIDEO
(Rear and front/
side)
q VIDEO
(L/R)/AUDIO
(Rear and front/
side)
K$ Y/PB/PR
(L/R)/AUDIO
q TV OUT
[81 AUDIO OUT
(VAR/FIX)
L (MONO)/R
q CONTROL S
IN/OUT
Description
Allows you to view local and cable channels if your cable
provider doesnot feature local channels. You can switch
between local and cable channels easily by pressing ANT
on the remote control. Devices connected to the AUX 3
2.
input cannot be viewed in Twin View. a
This is a VHF/UHF OUT jack that lets you setup your a
projection TV to switch between scrambled channels 2
(through acable box) and normal cable channels (CATV). :
Use this jack instead of a splitter to get better picture s
quality when switching between scrambled and
unscrambled cable channels. il
tr
Connects to your VHF/UHF antennaor cable. 3
Connects to the S VIDEO OUT jack of your VCR or other z
S VIDEO-equipped video component. Provides better
picture quality than the VHF/UHF jacks or the Video IN a
5
jack. B
Connects to the audio and video OUT jacks on your VCR 9
or other video component. A fourth video input (VIDEO 2
2) is located on the side panel (for KP-43HT20) or the
front panel (for KP-53HS20, KP-53HS30, KP-61HS20
and KP-61HS30) of the projection TV.
Connects to your DVD player’s or Digital Set-top box’s
component video (Y, PB, PR) and audio (L/R) jacks.
Connects to an AV receiver for greater control of all audio
and video equipment (seepage 30). For detailed
information about connection, refer to the operating
manual supplied with the AV receiver.
Connects to the left andright audio inputs of your audio or
video component.
To control other Sony equipment with the projection TV’s
remote control, connect the CONTROL S IN jack of the
equipment to the CONTROL S OUT jack on the
projection TV with the CONTROL S cable.
To control the projection TV with a remote control for
another Sony product, connect the CONTROL S OUT
jack of the equipment to the CONTROL S IN jack on the
projection TV with the CONTROL S cable.
15

Installing and Connecting the Projection TV
Basic Connections (Connecting Cable TV or Antenna)
Connecting Directly
to Cable or an
Antenna
The connection you choosedependson thecablefound in your home.Newer
homesareequipped with standardcoaxial cable (seea); older homes
probably have300-ohm twin lead cable (see q ); other homesmay contain
both (see q ).
q VHF Only or VHF/UHF or Cable
VHF/UHF
75-ohm coaxial
cable Rear of projection TV
H VHF Only or UHF Only or VHF/UHF
300-ohm twin lead cable VHF/UHF
Rear of projection TV
q VHF and UHF
75-ohm coaxial cable VHF/UHF
Rear of projection TV
300-ohm twin lead cable
Cable and Antenna
If your cable provider doesnot feature local channels,you may find this set
up convenient.
CATVcable
AUX G
(No connection to
TO CONVERTER)
TER Rear of projection TV
Antenna cable VHF/UHF
SelectCABLE or antenna(ANT) mode by pressing ANT on the remote
control.
16

Installing and Connecting the Projection TV
Cable Box
Connections
Cable Box and Cable
This is the preferred basic cableTV hookup to useif:
0 Your cable TV company scramblessomechannels,but not all of them
(pay channelsvs. regular cable channels) andyou needto useacable
box, and
0 You want to enjoy the Twin View feature.
With this setupyou can:
0 Use the projection TV remote control to changechannelsusing your
cable box when the signal is scrambled.
0 Use the projection TV remote control to changechannelsusing your
projection TV when the signal is not scrambled.(Your projection TV’s
tuner provides a better signal than the cable box.)
0 Usethe Twin View feature. (When all channelsarerouted through your
cable box, only onechannel is sentto the projection TV, soyou cannot
usethe Twin View or Channel Index featuresfor your cable box.)
1 Connect the Cable TV cable to the projection TV’s VHF/UHF jack.
2 Using a coaxial cable, connect the projection TV’s TO CONVERTER
jack to the cable box’s IN jack. The projection TV’s internal converter
allows you to switch betweenunscrambled signals coming straight into
the projection TV and scrambled signals coming in through the cable
box, eliminating the needfor anexternal splitter.
3 Using acoaxial cable, connectthe cablebox’s OUT jack to the
projection TV’s AUX jack.
Cable box
IN
: Signal
1 *
VHF/UHF
1 CATV cable (unscrambled channels)
(Continued)
17

Installing and Connecting the Projection TV
Cable Box Only
Use this hookup if:
0 You subscribeto acable TV system that usesscrambled or encoded
signals requiring a cable box to view all channels,and
0 You do not intend to hook up any other audio or video equipment to
your projection TV.
When all channelsarerouted through your cable box, only oneunscrambled
channel is sentto the projection TV, soyou cannot usethe Twin View
feature. If somechannelsarescrambled,but others arenot, consider using
the hookup on page 17instead.
1
2
Connect the coaxial connector from your cable service to the cable
box’s IN jack.
Using acoaxial cable, connectthe cable box’s OUT jack to the TV’s
VHF/UHF jack.
Cable VHF/UHF
Rear of projection TV
Cable box
Also, setCable to ON in the Channel menu. (seepage52)
Eii
Setting the Channel
Fix feature in the Channel
menu (see “Using the
Channel Menu” on page
52) ensures that you do
not accidentally switch
the channels using your
projection TV.
18

Installing and Connecting the Projection TV
Connecting a VCR and Cable
Usethis hookup if:
0 You havecable TV that doesnot require acable box.
Disconnect all power sources before making any connections.
1
Connect the cableTV cable to the VCR’s IN jack.
2u sing a coaxial cable, connectthe VCR’s OUT jack to the projection
TV’s VHF/UHF jack.
3 Using AUDIO and SVIDEO cables,connect the VCR’s Audio and
S VIDEO OUT jacks to theprojection TV’s AUDIO and S VIDEO IN
jacks.
Rear of Projectian TV
VMC-81 OS182OS
I
YC-15W3OV (not supplied)
19

Installing and Connecting the Projection TV
Connecting a VCR and Cable Box
Use this hookup if:
0 Your cable TV company scramblessomechannels,but not all of them
(pay channelsvs. regular cable channels) andyou needto useacable
box, and
0 You want to enjoy theTwin View feature.
With this setupyou can:
Cl Use the projection TV remote control to changechannelsusing your
cablebox when the signal is scrambled.
0 Use the projection TV remote control to changechannelsusing your
projection TV when the signal is not scrambled. Your projection TV’s
tuner provides a better signal than thecable box.
Q Use theTwin View feature. (When all channelsarerouted through your
cable box, only one signal is sentto the projection TV, soyou cannot
usethe Twin View feature.)
Disconnect all power sources before making any connections.
1
2
3
4
5
Connect the Cable TV cable to the projection TV’s VHF/UHF jack.
Using a coaxial cable, connect theTV’s TO CONVERTER jack to the
cable box’s IN jack. The projection TV’s internal converter allows you
to switch betweenunscrambled signals coming straight into the
projection TV and scrambled signals coming in through the cable box,
eliminating the needfor an external splitter.
Using acoaxial cable, connectthe cable box’s OUT jack to the VCR’s
IN jack.
Using AUDIO and S VIDEO cables,connect the VCR’s AUDIO and S
VIDEO OUT jacks to the projection TV’s AUDIO and S VIDEO IN
jacks.
Using acoaxial cable, connect the VCR’s OUT jack to the projection
TV’s AUX jack. 4
20