Sony KP-FS57 User manual

Projection TV
© 2002 Sony Corporation
KP-FS57
4-090-365-11 (1)
Operating Instructions
•Before operating the unit, please read this manual thoroughly and retain
it for future reference.
Mode d’emploi
•Avant de faire fonctionner cet appareil, lisez attentivement le présent
mode d’emploi et conservez-le pour toute référence ultérieure.
•xxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxx xxxxxxxxxxx xxxxxxxxxxx
xxxxxxx.
•xxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxx xxxxxxxxxxx xxxxxxxxxxx
xxxxxxx.
M90, M91, M61, M31
GB
FR
CT
CS
PR
AR
Projection TV
KP-FS57

2

3
Using Your New Projection TV
Table of Contents
WARNING
Using Your New Projection TV
Getting Started ............................................................................................. 5
Step 1 Install the projection TV............................................................ 5
Step 2 Connect the antenna .................................................................. 6
Step 3 Insert the batteries into the remote.......................................... 7
Step 4 Setting up your projection TV automatically ........................ 8
Connecting optional components ........................................................... 10
Watching the TV ........................................................................................ 15
The features you will enjoy include:
•“DRC-MF” for viewing higher quality
pictures (page 19)
• “TWIN” for viewing two programs (page
24)
•“PROGRAM INDEX“ for displaying
multiple programs (page 27)
•“PICTURE MODE”/“SOUND MODE”/
“SURROUND” for customizing your
projection TV (pages 18 and 29)
•“WIDE SCREEN” to enjoy wide mode
pictures (page 20)
•“MEMORY STICK” button on the remote
control for viewing still pictures stored in
a “Memory Stick”(page 37)
Your projection TV also offers the following
features:
•Initial Setup function for on-screen language
selection, automatic channel presetting and
automatic connvergence adjustment. (page 8)
•Menu language options
— English/Chinese/Arabic (page 60)
• “CHILD LOCK” for locking out specific
channels (page 66)
•“INTELLIGENT VOL” for automatic volume
adjustment (page 54)
•“FINE” tuning feature (page 64)
• Button Joystick on the remote control for
easier operation (page 50)
• “ECO MODE” to save energy (page 61)
• “GAME MODE” for video games (page 52)
Adjusting Your Setup (MENU)
Introducing the menu system .......... 47
Changing the “PICTURE” setting ...51
Changing the “SOUND” setting .....54
Changing the “MEMORY STICK”
setting............................................... 56
Changing the “WIDE SCREEN”
setting............................................... 57
Changing the “MULTI PICTURE”
setting............................................... 59
Changing the “SETUP” setting........60
Additional Information
Troubleshooting .................................67
Self-diagnosis function......................71
Identifying parts and controls ......... 72
Specifications ...................... Back cover
Advanced Operations
Selecting the picture and sound
modes ............................................... 18
Viewing higher quality pictures ......19
Using wide screen mode ..................20
Watching two programs
at the same time.............................. 24
Displaying multiple programs ........27
Listening with surround sound ....... 29
Enjoying stereo or bilingual
programs .........................................30
Viewing Teletext.................................32
Operating optional components ......34
Using a “Memory Stick” ................... 37
GB

4
WARNING
To prevent fire or shock hazard, do not expose the projection TV to rain or moisture.
Dangerously high voltages are present inside the projection TV. Do not open the
cabinet. Refer servicing to qualified personnel only.
For general safety:
• Do not expose the projection TV to rain or moisture.
•Do not open the rear cover.
For safe installation:
•Do not block the ventilation openings.
•Do not install the projection TV in hot, humid or excessively dusty places.
• Do not install the projection TV where it may be exposed to mechanical vibrations.
•Avoid operating the projection TV at temperatures below 5°C (41°F).
•If the projection TV is transported directly from a cold to a warm location, or if the room
temperature has changed suddenly, the picture may be blurred or show poor color. This
is because moisture has condensed on the mirror or lenses inside. If this happens, let the
moisture evaporate before using the projection TV.
•To obtain the best picture, do not expose the screen to direct illumination or direct
sunlight. It is recommended to use spot lighting directed down from the ceiling or to
cover the windows that face the screen with opaque drapery. It is desirable to install the
projection TV in a room where the floor and walls are not of reflecting material. If
necessary, cover them with dark carpeting or wall paper.
• Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
For safe operations:
•Do not operate the projection TV on anything but 110–240 V AC, 50/60 Hz.
•Do not operate the projection TV if any liquid or solid object falls in it—have it checked
immediately.
•Do not keep the projection TV plugged in if you are not going to use it for several days.
Even if your TV is turned off, it is still connected to the AC power source (mains) as long
as the power cord is plugged in.
•Do not pull the power cord to disconnect the projection TV. Pull it out by the plug.
•Do not plug in too many appliances to the same power socket. Do not damage the
power cord.
•Do not place any object on the projection TV.
•Install the projection TV on a stable projection TV stand and floor which can support the
projection TV set weight. Ensure that the projection TV stand surface is flat and its area
is larger than the bottom area of the projection TV.
•Do not carry the projection TV holding the screen edges.
Caution
•When using TV games, computers, and similar products with your projection TV, keep
the brightness and contrast functions at low settings. If a fixed (non-moving) pattern is
left on the screen for long periods of time at a high brightness or contrast setting, the
image can be permanently imprinted onto the screen. These types of imprints are not
covered by your warranty.
Cleaning the Screen
•To clean the screen with a cloth, please use the supplied cleaning cloth lightly moistened
with water. Do not use any type of abrasive pad, alkaline cleaner, scouring powder or
solvent, such as alcohol or benzine. As a safety precaution, unplug the TV before
cleaning it.
•Do not rub, touch, or tap the surface of the screen with sharp or abrasive items, like a
ball point pen or a screw driver. Otherwise, this type or contact may result in a scratched
screen.

5
Using Your New Projection TV
Using Your New Projection TV
Optimum viewing area (Horizontal)
Getting Started
Step 1
Install the projection TV
For the best picture quality, install the projection TV within the areas below.
Using Your New Projection TV
continued
Optimum viewing area (Vertical)
60°
60°
30°
30°
min. 1.9 m
(6 ft.)
min. 1.9 m
(6 ft.)

6Using Your New Projection TV
Getting Started (continued)
: Signal flow
IEC connector
(not supplied)
or
Antenna cable (not supplied)
Antenna cable (not supplied)
Rear of
projection TV
Step 2
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram on page 7.
CAUTION
Do not connect the power cord until all other connections are
complete, otherwise, a minimal current leakage through the antenna
and/or other terminals to the ground could occur.

7
Using Your New Projection TV
Using Your New Projection TV
Y
P B /
C B
P R /
C R
Y
P B / C B
P R / C R
R
L
R
L
R
L
(MONO)
1122 3
G
B
HD
VD
SYNC
R
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R L
Connecting a VCR
To play a video tape, press t(see page 16).
To video and
audio outputs
To S video
output
Audio/Video cable
(not supplied)
S video cable
(not supplied)
: Signal flow
To
(S video input)
VCR
Antenna cable (not supplied)
To antenna
output
To 8(antenna)
Rear of
projection TV
To t1, 2 or 3 (video input)
(yellow)
-L (MONO) (white)
-R (red)
continued
Notes
•If you connect a monaural VCR, connect the yellow plug to (the yellow
jack) and the black plug to -L (MONO) (the white jack).
•If you connect a VCR to the 8(antenna) terminal, preset the signal
output from the VCR to the program number 0 on the projection TV.
•When both the (S video input) and t1 (video input) are connected,
the (S video input) is automatically selected. To view the video input
to t1 (video input), disconnect the S video cable.
Step 3
Insert the batteries into
the remote
Note
•Do not use old batteries or different types of batteries together.

8Using Your New Projection TV
1Press !to turn on the
projection TV.
The “INITIAL SETUP”
menu appears, and you can
select the on-screen
language.
2Move up or down to
select the desired
language, then press .
The automatic channel
presetting menu appears.
Step 4
Setting up your projection TV automatically
Getting Started (continued)
M
E
M
O
R
Y
S
T
I
C
K
VIDEO
DRC-MF
HD/DVD
A/B
PROG
INDEX
MENU
V CENTER
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
MENU
!
INITIAL SETUP
LANGUAGE: ENGLISH
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
INITIAL SETUP
START AUTO PROGRAM
NOW?
YES
NO
Step 4
Setting up your projection TV automatically

9
Using Your New Projection TV
Using Your New Projection TV
3Move up or down to
select “YES”, then press
to preset the channel
automatically.
The screen will indicate
automatic presetting is in
progress.
After channel presetting is
complete, automatic
convergence adjustment
menu appears.
4Make sure that “YES” is
selected, then press .
The convergence
adjustment screen
appears, and the
convergence is
automatically adjusted.
The last “INITIAL
SETUP” menu appears.
5Move up or down to select “NO”, then press .
The “INITIAL SETUP” menu will not appear again the next time you turn on the
projection TV by pressing !.
To allow this menu to appear again, select “YES”, then press .
Notes
•If you want to cancel any setup, move up or down to select NO and
press , or press MENU.
•If your projection TV has preset an unwanted channel or cannot preset a
particular channel, then preset your projection TV manually (see page 63).
•Convergence is also adjusted manually using the menu (see page 62.)
•You can also perform the Digital Quick Focus feature using on the
front panel.
•Sound will mute while the Digital Quick Focus feature is running.
•The MENU, 2+ or – and ENTER buttons on the projection TV can be
also used for the above operations instead of and MENU buttons on
the remote control.
INITIAL SETUP
DISPLAY THIS MENU
NEXT TIME?
YES
NO
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
INITIAL SETUP
PROG : 09
TV SYS : AUTO
VHF LOW
INITIAL SETUP
START DIGITAL QUICK
FOCUS NOW?
YES
NO

10 Using Your New Projection TV
Connecting optional components
You can connect optional audio/video components, such as a VCR, a DTV (Digital
Television) Receiver, multi disc player, camcorder, video game, or stereo system. To
watch and operate the connected equipment, see pages 16 and 34.
Connecting a camcorder/video game equipment
using the t(video input) jacks
Notes
•When connecting video game equipment, display the “PICTURE” menu
and select “ON” for “GAME MODE” to adjust the picture setting that is
suitable for video games (see page 52).
•You can also connect video equipment to the t1, 2, or 3 (video input)
jacks at the rear of your projection TV.
•When both the (S video input) and t4 (video input) are connected,
the (S video input) is automatically selected. To view the video input
to t4 (video input), disconnect the S video cable.
L(MONO) R
4
: Signal flow
To S video
output
Camcorder
Video game
equipment
To video and
audio outputs
To
(S video input)
To t4
(video input)
or
Audio/Video cable (not supplied)
S video cable (not supplied)
To open the drop-down panel of your
projection TV, push it up until you hear a
click, then it will slide down.

11
Using Your New Projection TV
Using Your New Projection TV
Connecting audio/video equipment using the T
(monitor output) jacks
Note
•If you select “HD/DVD 1” or “HD/DVD 2” on your projection TV screen,
no sound and no picture will be output from T(monitor output) (see
page 16).
Y
P B
/ C B
P R
/ C R
Y
P B / C B
P R / C R
R
L
R
L
R
L
(MONO)
1122 3
G
B
HD
VD
SYNC
R
(yellow)
-L (MONO)
(white)
-R (red)
Rear of projection TV
To
antenna
output
To video
and audio
inputs
or
Audio system
To
audio
inputs
VCR
: Signal flow
To T
(monitor
output)
Antenna cable (not supplied)
Audio cable
(not supplied)
Audio/Video cable (not supplied)
continued

12 Using Your New Projection TV
Connecting optional components (continued)
Y
P B /
C B
P R /
C R
Y
P B / C B
P R / C R
R
L
R
L
1 2
G
B
R
VIDEO
R-AUDIO-L
LINE OUT
Y
COMPONENT VIDEO OUT
S VIDEO OUT
C B C R
Connecting a DVD player to (component video input)
1Using an audio cable, connect R and L under 1 or 2 (component video input) on
your projection TV to the LINE OUT, AUDIO R and L output connectors on your
DVD player.
2Using a component video cable, connect Y, PB/CB, and PR/CRunder 1 or 2
(component video input) on your projection TV to the COMPONENT VIDEO OUT
Y, CB, and CRoutput connectors on your DVD player.
3Press tor HD/DVD on the remote or ton the projection TV until “HD/DVD 1”
appears on the screen if you connect your DVD player to 1, or “HD/DVD 2” for
connection to 2.
To component
video output
Component video cable
(not supplied)
DVD
player
To -L (white)
-R (red)
To audio
output
Audio cable
(not supplied)
: Signal flow
To 1 or 2
(component video input)
Rear of
projection TV
Notes
•Some DVD player terminals may be labeled differently:
Connect To (on the DVD player)
Y (green) Y
PB/CB(blue) Cb, B-Y or PB
PR/CR(red) Cr, R-Y or PR
•Connect nothing to the HD/VD jacks when connecting a DVD player to
1 or 2 (component video input).
•If you select “HD/DVD 1” or “HD/DVD 2” on your projection TV screen,
no sound and no picture will be output from T(monitor output). This
does not indicate a malfunction.
•When receiving a progressive signal through (component video
input), TWIN pictures and PROGRAM INDEX features are not available,
and “DRC-MF” and “GAME MODE” are not selectable.

13
Using Your New Projection TV
Using Your New Projection TV
R
L
(MONO)
12 3
VIDEO
R-AUDIO-L
LINE OUT
Connecting a DVD player to t(video input)
Connect t1, 2, or 3 (video input) /(audio/video) connectors on your projection
TV to LINE OUT on your DVD player.
To audio/video
output
(yellow)
-L (MONO) (white)
-R (red)
To t1, 2, or 3
(video input)
: Signal flow
Audio/Video cable
(not supplied)
Notes
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (“SHARP”)
under “ADJUST” in the “PICTURE MODE” menu (see page 53).
•You can also connect a DVD player to (S video input) on the projection
TV.
Rear of
projection TV
DVD
player
continued

14 Using Your New Projection TV
Y
P B / C B
P R / C R
R
L
2
G
B
HD
VD
SYNC
R
Connecting a DTV (digital television) receiver to
1 or 2 (component video input) jacks
Component video cable
(not supplied)
Digital TV
receiver
To -L (white)
-R (red)
To audio
output
Audio cable
(not supplied)
: Signal flow
To 1 or 2
(Component video input)
Rear of
projection TV
To component
video output
Notes
•The projection TV is equipped with the G/B/R/HD/VD inputs. If your
DTV receiver is not equipped with the Y/PB/PRoutput connectors, use the
G/B/R/HD/VD connectors.
•1 can be used as the Y/PB/PRinputs.
•2 can be used as the Y/PB/PRor G/B/R/HD/VD inputs. Connect
nothing to the HD/VD connectors when using the Y/PB/PRinputs.
Tip
•The projection TV accepts the following signal formats:
Total scanning Effective scanning fV (Hz)
line line
1125i 1080i 50/60
750p 720p 50/60
625p 576p 50
625i 576i 50
525p 480p 60
525i 480i 60
Connecting optional components (continued)

15
Using Your New Projection TV
Using Your New Projection TV
TV
M
E
M
O
R
Y
S
T
I
C
K
VIDEO
DRC-MF
HD/DVD
123
456
78
0
9
JUMP
PROG
OPTION RESET
A/B
V CENTER
PROG
INDEX
MENU
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
1Press !to turn on the
projection TV.
When the projection TV is in standby mode
(the 1indicator on the projection TV is lit
red), press !/1on the remote.
2Press PROG +/– or the number
buttons to select the TV
channel.
For double digit numbers, press
-, then the number (e.g., for 25,
press -, then 2 and 5).
Note
•When you turn on the projection TV, either the program number or video
mode is displayed for approximately 40 seconds. The ECO MODE ( )
icon will also appear if “ECO MODE “ in the “SETUP” menu is set “ON”
(see page 61).
PROG
MENU
ENTER
HD/DVD
Number
buttons
JUMP
PROG
+/–
2+/–
Watching the TV
This section explains various functions
and operations used while watching the
TV. Most operations can be done using
the remote.
or
1 indicator
PROG
123
456
78
0
9
continued

16 Using Your New Projection TV
Watching the TV (continued)
To select a TV program quickly
(1) Press and hold PROG +/–.
(2) Release PROG +/– when the desired program number appears.
Note
•When you select a TV program quickly, the picture may be disrupted.
This does not indicate a malfunction.
Additional tasks
To
Turn off temporarily
Turn off completely
Adjust the volume
Mute the sound
Watch the video input
(VCR, camcorder, etc.)
Watch the component input
(DVD, DTV receiver)
Jump back to the previous channel
Display the on-screen information*
*Some picture/sound settings, and either the program number or video
mode are displayed. The on-screen display for the picture/sound settings
disappears after about 3 seconds.
Press
@/1.
The 1indicator on the projection TV lights up red.
!on the projection TV.
2+/–.
%.
t(or ton the projection TV) to select “VIDEO 1”,
“VIDEO 2”, “VIDEO 3”, “VIDEO 4”, “HD/DVD 1” or
“HD/DVD 2”.
To return to the TV screen, press a(or ton the
projection TV).
HD/DVD to select “HD/DVD 1” or “HD/DVD 2”.
To return to the TV screen, press a(or ton the
projection TV).
JUMP.
.

17
Using Your New Projection TV
Using Your New Projection TV
SLEEP TIMER:30M SLEEP TIMER:60M
SLEEP TIMER:OFF SLEEP TIMER:90M
After 30 minutes
No Sleep Timer
After 60 minutes
After 90 minutes
WAKE UP TIMER:10M
WAKE UP TIMER:OFF WAKE UP TIMER:12H00M
After 10 minutes
No Wake Up Timer After 12 hours
Setting the Wake Up timer
1Press until the desired
period of time appears.
The Wake Up timer starts
immediately after you
have set it.
2Select the TV channel or video mode you want to wake up to.
3Press !/1, or set the Sleep timer if you want the projection TV to turn off
automatically.
The indicator on the projection TV lights up orange.
To cancel the Wake Up timer
Press until “WAKE UP TIMER: OFF” appears, or press !on the
projection TV to turn it off.
Note
•If no buttons or controls are pressed for more than two hours after the
projection TV is turned on using the Wake Up timer, the projection TV
automatically goes into standby mode. To resume watching the TV, press
any button on the projection TV or the remote.
Setting the Sleep timer
Press until the desired
period of time appears.
The Sleep timer starts
immediately after you
have set it.
To cancel the Sleep timer
Press until “SLEEP TIMER: OFF” appears, or turn the projection
TV off.

18 Advanced Operations
0
JUMP
PROG
OPTION RESET
Advanced Operations
Selecting the picture mode
Press repeatedly until
the desired picture mode
is selected.
Select
“DYNAMIC”
“STANDARD”
“HI-FINE”
“PERSONAL”
To
receive high contrast pictures.
receive normal pictures.
receive higher density pictures with mild contrast.
receive the last adjusted picture setting from the “ADJUST” option in the
“PICTURE” menu (see page 53).
Selecting the sound mode
Press repeatedly until
the desired sound mode is
selected.
Tip
•You can also set the picture and sound modes using the menu (see
“Changing the “PICTURE” setting” on page 51 and “Changing the
“SOUND” setting” on page 54).
Select
“DYNAMIC”
“DRAMA”
“SOFT”
“PERSONAL”
To
listen to dynamic and clear sound that emphasizes both the low and high
tones.
listen to sound that emphasizes voice and high tones.
receive soft sound.
receive the last adjusted sound setting from the “ADJUST” option in the
“SOUND” menu (see page 55).
Selecting the picture
and sound modes
You can select picture and sound modes
and adjust the setting to your preference
in the “PERSONAL” option.
PERSONAL
DYNAMIC
HI-FINE
STANDARD
9 DYNAMIC
9 PERSONAL 9 SOFT
9 DRAMA

19
Advanced Operations
Viewing higher
quality pictures
— “DRC-MF”
The Digital Reality Creation-Multi
Function (DRC-MF) feature allows you to
enjoy higher quality pictures on your
projection TV. You can select “DRC1250” to
watch super real (higher resolution)
pictures, or “DRC100” for moving pictures
or “DRC PROGRESSIVE” for still pictures
to reduce flicker if necessary.
Press DRC-MF repeatedly
until you receive the
desired picture quality.
Tip
•When the broadcast signal is weak, you may see some dots or noise on the
TV screen. To reduce this interference, display the “PICTURE” menu and
select “ADJUST” in “PICTURE MODE”, then adjust “SHARP” to reduce
the sharpness (see page 53).
Note
•The DRC-MF mode is not selectable when using the “PROGRAM INDEX”
feature, when the “GAME MODE” or “TWIN” mode is turned “ON”, or
when the “Memory Stick” menu is displayed. The mode is not also
selectable for HD (high-definition) or progressive signal.
The DRC-MF logo ( ) and “DRC-MF” are trademarks of
Sony Corporation.
M
E
M
O
R
Y
S
T
I
C
K
VIDEO
DRC-MF
HD/DVD
123
456
78
0
9
JUMP
A/B
V CENTER
PROG
INDEX
MENU
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
Select
“DRC1250”
“DRC100”
“DRC PROGRESSIVE”
To
select higher resolution pictures.
reduce flicker on the screen.
reduce jitter of any small areas or scanning lines (e.g., letters or
the edge of objects) on the screen.
DRC-MF
DRC-MF: DRC1250 DRC-MF: DRC100
DRC-MF: DRC PROGRESSIVE
DRC-MF
Advanced Operations

20 Advanced Operations
Using wide screen
mode
The wide screen mode feature allows
you to watch the picture filling the 16:9
screen of the projection TV.
Watching the picture in wide screen mode automatically
— AUTO WIDE
The projection TV automatically selects optimum wide screen mode according to the
signal input and displays the picture to fill the 16:9 screen.
Notes
• The AUTO WIDE feature may not work correctly depending on the quality
of signal. In this case, select wide screen mode manually using the
button (see page 22).
• The examples in the table on page 21 show the settings preset at the
factory; “AUTO WIDE” is set to “ON” and “4:3 DEFAULT” is set to
“WIDE ZOOM” in the “WIDE SCREEN” menu (see pages 57 and 58).
TV
M
E
M
O
R
Y
S
T
I
C
K
VIDEO
DRC-MF
HD/DVD
123
456
78
0
9
JUMP
PROG
OPTION RESET
A/B
PROG
INDEX
MENU
V CENTER
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
V CENTER