Mounting
Before mounting
A depth of at least 43 mm/ 1_/4 in. *(51 mm /
2 i/s in.) is required for flush mounting. Keep
the following in mind when choosing a
mounting location:
•A hole may already be cut out of the metal
frame of the front door.
• Nothing should interfere with the speaker
inside the door.
• The speaker inside the door must not come
into contact with the window when it is open.
• Be careful so that the speakers are out of the
way of the window cranks, door handles and
arm rests.
• Make sure that the speaker does not hinder
the movement of torsion bar springs etc. of
the trunk lid.
*(XS-V1331)
[
If you cannot find an appropriate mounting I
location, check with your car dealer or I
consult the nearest Sony dealer.
Iff
