Sony STR-DE575 - Fm Stereo/fm-am Receiver User manual

Friday, January 25, 2008 1:45 PM

Sony STR-DE575 Manual
January 18, 2008; printed: Friday, January 25, 2008 1:45 PM
RECORDING ROOM MONITOR SYSTEM:
[1] POWER Switch
[7] Set 2CH button
[8] Input - Analog
[9] FUNCTION=<CD> - CD-RW2000 monitor
[9] FUNCTION=<AUX> - Call Back monitor
[10] MASTER VOLUME
[11] MUTE
[14] SPEAKERS “ON”

RECORDING CD-R OUTPUT
TO
MONITOR AMP INPUT (located in the
Monitor Box, see section II, iii)
LEFT - PATCH (R5/C23)
RIGHT – PATCH (R5/C24)
LEFT - PATCH (R11/C9)
RIGHT – PATCH (R11/C10)
TO MONITOR THE CD (Tascam CD-RW2000)
1. Turn on Monitor System by pressing the power button < | / ø > located in the upper left-
hand corner of the Sony Amplifier unit. [1]
2. Select <CD> on the Amplifier Function Buttons [9]
3. The Recording CD-R (CD-RW2000) is NORMALed for monitoring
4. Adjust Volume on Amp above Mackie board in the monitor rack. [10]
5. To monitor another source - Patch desired deck output Left and Right (on patch panel) to
Monitor in Left (R11/C9) and Right (R11/C10).
TO MONITOR THE CALL-BACK SYSTEM (Superscope PAC750)
1. Be sure the Call Back system is turned on.
2. Turn on Monitor System by pressing the power button < | / ø > located in the upper left-
hand corner of the Sony Amplifier unit. [1]
2. Select <AUX> on the Amplifier Function Buttons [9]
3. This is directly coupled to the STR-DE575 for monitoring
4. Adjust Volume on Amp above Mackie board in the monitor rack. [10]
Compiled by Paul Nelson
And
Nelson Goering ‘10
Friday, January 25, 2008
Updated: Friday, January 25, 2008 1:45 PM