SoonMark M8 User manual
User manual of
Direct Thermal
Barcode Printer
Model: M8
Brand: SoonMark
Paper size: 100mm x 150mm
3
1) Adapter + Power Jack Adapter
2) USB Printer Cable
3) Operation Manual
4) Driver Disk
5) Power Cord
5) Power Cord
2) USB Printer Cable
4) Driver Disk
3) Operation Manual
1) Adapter + Power Jack
Adapter
A) Equipment checklist
4
Core Adapter
will be placed
at both sides to
secure the
label roll while
printing.
Insert the label roll using the ‘Roll Mount’.
Core
Adapter
Label
Spindle
1
Label Roll
2
3
2
1
3
Notes: Make sure all pieces of equipment are assembled and in good condition.
Roll Mount
A) Equipment checklist
5
Front surface
Back surface
The Open
button for the
Top Cover
Feed
Button
Power
Switch
SD Card
Slot Power Jack
Adapter Slot
USB Printer Port
I -On
O - Off
Clear
Window
is to view
the label roll
inside the
printer.
is used for
the
calibration
process.
B) Printer parts
6
Step 1
Please connect the ‘USB’ to the PC/Laptop and plugin the
‘Power Cord’ into the socket.
Step 2
The ‘USB Printer Cable’ and ‘Power Jack Adapter’ need to
connect with the printer. Then, turn on the switch button, and it
will beep once.
USB Printer Cable Power Jack Adapter
C) Printer setting
Step 2
This driver will download as a zip file. Kindly save this zip file
at any folder inside your PC/Laptop.
Step 3
To unzip the file, right-click at the zip file and choose ‘Extract
Here’.
Step 1
Click here: www.skynet.com.my/labelprinter and select the
‘Driver’ as shown.
7
D) Download & save the driver file
Download Driver
User Manual (English)
8
Step 1
After unzipping the file, double click at
‘Driver (for Win7 Win8 Win10)’ to install the printer driver.
Step 2
Kindly tick ‘I accept the terms in the license agreement’ and
click on the ‘Next’ button.
E) Installation
9
Step 3
Click the ‘Next’ button.
Then, click at the ‘Finish’ button.
E) Installation
10
Step 4
This ‘Shield icon’ will blink at the PC/Laptop
taskbar. Kindly click at the icon to continue the installation.
Then, click on the ‘Next’ button.
E) Installation
11
Step 5
Click on the ‘Next’ button.
•Use the default name or rename the file for easier reference.
•Rename the Printer as ‘SMK-M8’.
➢SMK referring to SoonMark.
➢M8 referring the Model’s name.
•Once done, click on the ‘Next’ button.
E) Installation
12
Step 6
Click on the ‘Finish’ button.
The driver has been installed successfully! Click ‘Close’.
E) Installation
13
Step 1
Go to the Windows ‘Setting' and click on the ‘Devices’.
Step 2
•Click at the ‘Printer & Scanners’.
•Select the printer that has already been renamed as
‘SMK-M8’.
•Click on the ‘Manage’ button.
F) Size setting
14
Step 3
Click at the ‘Printing preferences’.
Step 4
•Select the size ‘4 x 6’ (4.00 in x 6.00 in) for the
A6 sticker.
•Click on the ‘Apply’ button to apply the changes and then
click ‘OK’.
15
Step 1
Select the ‘SMK-M8’ printer.
Step 2
Select ‘Fit to Paper’ for ‘Scale’ and click ‘Print’.
Once everything is completed, the printer is to be used.
The last process is to print your eAWB.
G) Print eAWB
Thank You
Table of contents
