Sound Magic E11BT User manual

E11BT
User manual 使用说明书
蓝牙运动耳机
Bluetooth Earphone

SoundMAGIC Group
Marketing
Hongkong SoundMAGIC Technology Development Co.,LTD
Shenzhen SoundMAGIC Technology Development Co.,LTD
R & D and Manufacture
Dongguan Nianrui Electronic Technology Co.,LTD
Fulong Industry Road 8,Fulong Community Shipai Town,Dongguan,China
Tel: [phone] Fax:[phone]
Email: [email protected]
www.soundmagic.com
1613# Building A,Weidonglong Business Building,Meilong Road No 2125,
Qinghua Community,Longhua District,Shenzhen China

I.Packing List
E11BT Bluetooth Earphone
Bowl-shaped silicone eartips S/L
(Middle size on the Headphone)
USB charging cable
Carry pouch
User manual
①
②
③
④
⑤
E11BT
Wireless In-Ear Headphone with Mic
蓝牙运动耳机
①
②③
④⑤
02

II.Technical specifications
Bluetooth...................................................................................Bluetooth V5.0
Driver.................................................................Dynamics,10mm,Neodymium
Transmission Range.........................................................................Up to13m
Impedance........................................................................................42±10%Ω
MIC Sensitivity.....................................................................................-42±3dB
Continuous Playback music.................................................................48~60H
Continuous Talk Time..........................................................................20~24H
Standby Time...........................................................................................280H
Weight......................................................................................................24.7g
Ambient Temperature....................................................................-20°C~60°C
03

III.Function buttons/USB
E11BT has a built-in noise cancelling microphone,which can make/reject
the phone calls crisply and reliably. And you can stop/start play the music
directly via the microphone control.
Multifunction Volume -
Volume + Micro USB
04

IV.Basic functions and operations
1.Power on
Press and hold the “Multifunction” button for 3 seconds to power on: “Power on”
prompt will be heard when the headset is turned on.
2.Power off
Press and hold the “Multifunction” button for 3 seconds to power off: “Power off”
prompt will be heard when the headset is turned off.
3.Pairing
1)With your E11BT off, press and hold the “Multifunction” button for about 5
seconds until the red-blue LED is flashing rapidly (keep the button held down
for another 2 seconds past the 'power on' prompt).
2)Open your smartphone’s Bluetooth connection function to enable Bluetooth
mode and search for the Bluetooth device. You should find the E11BT headset.
Select the E11BT to finish pairing.
05

4.Automatic Connection
If your smartphone has been paired successfully with your E11BT, they will
connect automatically if they’re within the effective distance (10m) and
effective time period (5 minutes). If your E11BT is outside the effective distance,
it will disconnect. But if it comes back to being within the effective distance again
within 5 minutes, it will connect back to your smartphone automatically. After 5
minutes with no connection, your E11BT will automatically power off.
5.Playing music
Press “Multifunction” button to start music. Press again to stop music.
Press “+” twice to play next song.
Press “-” twice to play last song.
Press and hold “+” to fast forward.
6.Incoming call
When receiving an incoming call, press the “Multifunction” button to answer the call.
Press the “Multifunction” button again to hang up. Rapidly press the “Multifunction”
button for 2 seconds to reject the call.
06

7.Call waiting
During a call, press the “Multifunction” button for 3 seconds to put the current
call on hold and answer the incoming call. (This function may depend on your
network operator).
8.Volume Control
Press “+” to increase the volume.
Press “-” to decrease the volume.
9.Last number redial
Press the “Multifunction” button twice to redial the last number.
10.Charging
Please use a computer or USB outlet with 5V±0.2V output voltage to charge
your E11BT, using the provided USB cable. A red light indicates that your
E11BT is being charged. The red light will go out and the blue light will come
on once your E11BT is fully charged (charge time is about 2 hours).
07

V.Maintenance and precautions
1.Any improper use or unauthorized servicing that results in damage to your
E11BT will void the warranty.
2.Do not use sharp objects near your E11BT.
3.Do not keep your E11BT in charging mode for long periods.
4.Do not store your E11BT near toxic chemicals.
5.Do not store your E11BT near magnets.
6.Do not leave your E11BT with a fully drained battery for long periods.
7.If your E11BT is out of use for a long time, please charge it periodically to
protect the battery.
08

VI.Common problems and solutions
Problem Reasons Solutions
Not turning on
Disconnecting
No sound after pairing
When making a call, voice
is still coming from smart
-phone
Noise/stuttering
The audio is still quiet after
increasing the volumet
My voice is too quiet when
making a call
Unable to hold current call
and answer incoming call
Battery low
Signal subject to interference
Mobile Bluetooth media audio
is not turned on
Smartphone call audio is set
to smartphone
Smartphone is too far away from
E11BT or there is interference in
the surrounding environment.
The volume on the smar tphone is
too low
The microphone aperture is
clogged with dust
Phone operator hasn't enabled
this function.
Charge battery
Re-pair the devices in a
different placet
Enable mobile Bluetooth
media audio
Set to Bluetooth answer
Move closer to smartphone
or move to a different place
Increase the smartphone's
volumet
Clean your E11BT
Contact the phone operator
to enable this function.
9

VII.Customer service and support
Please contact us directly for service and support. Our service team
is ready to help you.
E-Mail: [email protected]
Phone: [phone]
Fax: [phone]
Factory address: Fulong Industry Road 8, Fulong Community Shipai
Town, Dongguan, China
For more information about SoundMAGIC please visit our website:
www.soundmagic.com
10

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

一、装箱清单
E11BT 蓝牙运动耳机
大/小号耳塞(中号在耳机上)
数据线
收纳袋
说明书
①
②
③
④
⑤
E11BT
Wireless In-Ear Headphone with Mic
蓝牙运动耳机
①
②③
④⑤
11

二、技术参数
技术标准…………………......…………………......................................….Bluetooth V5.0
单元………………………….............................................……………10mm钕铁硼磁动圈
传输距离……………….............................................................................……Up to 13m
阻抗…………………….......................................................……………………….42±10%Ω
MIC灵敏度……………………...............................................................………....-42±3dB
连续播放音乐时间…………....................................................................…….....48~60H
持续通话时间…………………..................................................................…….....20~24H
待机时间…………………………….....................................................................……..280H
重量…………………………………………….................................................................24.7g
环境温度......................................................................................................-20℃~60℃
12

三、功能展示
耳机线控内置降噪麦克风，一键接挂电话，通话过程流畅清晰；
在音乐播放模式下，可暂停或播放
多功能键 “-”键
“+”键 Micro充电接口
13

四、基本功能与操作
1.开机
长按“多功能”键约3秒：开机，耳机提示音“power on”
2.关机
长按“多功能”键约3秒：关机，耳机提示音“power off”
3.配对
1)关机状态下，长按“多功能”键约5秒（3秒左右会开机，此时不要放开）
LED红蓝指示灯交替快速闪烁，进入自动搜索配对状态
2)打开播放设备蓝牙连接功能搜索蓝牙设备，将会搜索到的蓝牙耳机型号E11BT,
点击即可完成配对
14

4.自动连接
手机与耳机如果已经配对成功，耳机和手机蓝牙功能都处于开启状态，在有效距离
和有效时间内，二者可自动建立连接；在使用的过程中耳机超出有效距离断开连接
后，5分钟内回到有效距离，耳机将与手机自动建立连接，超过5分钟耳机将启动省
电模式自动关机
5.音乐播放
点按“多功能”键：开始播放音乐；再次点按：暂停播放音乐
双击“+”键：播放下一曲
双击“-”键：播放上一曲
按住“+”键不放：快进
6.来电
来电时点按“多功能”键：接通电话；通话时点按“多功能”键：结束通话；来电时
长按“多功能”键2秒：拒接来电
15

4.自动连接
手机与耳机如果已经配对成功，耳机和手机蓝牙功能都处于开启状态，在有效距离
和有效时间内，二者可自动建立连接；在使用的过程中耳机超出有效距离断开连接
后，5分钟内回到有效距离，耳机将与手机自动建立连接，超过5分钟耳机将启动省
电模式自动关机
5.音乐播放
点按“多功能”键：开始播放音乐；再次点按：暂停播放音乐
双击“+”键：播放下一曲
双击“-”键：播放上一曲
按住“+”键不放：快进
6.来电
来电时点按“多功能”键：接通电话；通话时点按“多功能”键：结束通话；来电时
长按“多功能”键2秒：拒接来电
7.第三方通话
通话时有新来电，长按“多功能”键3秒：当前通话保持，接通第三方来电。（此
功能需电话运营商开通支持此项功能。）
8.音量调节
点按“+”键：增加音量
点按“-”键：降低音量
9.末号重播
双击“多功能”键：最后一次拨打号码重播
10.充电
请使用电脑或者输出电压为5V±0.2V的设备和USB数据线充电数据线充电
当红色灯亮时，表示正在充电
充电结束时，红色灯灭蓝色灯亮起（充电时间约为2H）
16

五、维护和注意事项
1.任何由于个人使用不当或者非专业人士的维修对耳机造成的破坏被列入保修范围
2.不可使用尖锐的物体接触耳机
3.不可使耳机一直处于充电状态
4.不可存放在有化学腐蚀性环境中使用
5.不可将产品防止于强磁的环境中
6.不可让耳机长期处于无电状态
7.长时间不使用，请隔一段时间进行充电，保护电池
17

六、常见问题与解决方案
常见问题 常见原因 解决方案
不能开机
无法连接
配对连接后媒体声音外放
打电话时声音仍然为听筒
有杂音
耳机声音调大后声音
依然小
通话时对方听到声音小
无法保持当前通话接听
第三方
电量不足
其他电磁波干扰
手机蓝牙功能媒体音频未打开
手机接听方式设置为听筒
手机里耳机太远或周围环
境有干扰
手机播放的声音太小
麦克风通话孔被灰尘堵塞
运营商未开通此功能
进行充电
换个环境重新匹配连接
打开设置
设置为蓝牙接听
拉近距离更换环境
调大手机音量
保持耳机清洁及时清洁
联系运营商开通解决
18