SoundMax SM-DVBT280 User manual

MULTIMEDIA PLAYER WITH DVB-T2 RECEIVER
МУЛЬТИМЕДИЙНЫЙ ПЛЕЕР
С DVB-T2 ПРИЕМНИКОМ
SM-DVBT280
Instruction manual
Руководство по
эксплуатации

Table of contents
Table of contents
Before you start
Important safeguards
Utilization of the product
Connection
Connection
Operation
Control elements
Front panel
Rear panel
Remote controller
Changing the battery
General operation
OSD operation
Installation guide
Program
Picture
Search
Time
Option
USB
USB information
PVR and EPG
Time Shift
General information
Troubleshooting
Accessories
Supported formats
Specifications
Table of contents
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
2
3
3
3
4
4
5
5
5
5
6
6
7
8
8
8
9
9
10
11
11
11
12
12
13
13
14
2
9
10

Before you start
Before you start
Important safeguards
• To prevent risk of fire or electric shock,
avoid merging the unit into the water or under
conditions of high humidity.
• Switch off the device from the socket, if
you’re not going to use it for a long time.
• Do not place objects on the device.
• Place the unit in a dry and ventilated area.
Eliminate proximity to heaters, do not expose
to sunlight, mechanical vibration, humidity and
dusty environment.
• It is possible to use a small amount of
neutral detergent to clean the device.
• Never use abrasive materials or organic
substances (alcohol, gasoline, etc.) to clean
the device.
•For repair and maintenance contact only
authorized service centers.
• Before connecting the device to the mains,
please make sure the network cable can be
easily disabled at any time.
• Unplug from the mains and from the cable
television antenna, unless you intend to use it
for a long time, or before a thunderstorm. Do
not touch the unit, power cord and antenna
cable during a thunderstorm!
• Before you turn on the device, please
check the reliability of its connection to the
power supply and other devices.
• This unit can not receive television signals
during the movement of the vehicle.
• After prolonged exposure to cold, before
turning on leave the device for 1 hour at a
room temperature.
Before using this product, carefully read
the manual. After you read, save it for future
use. If necessary, contact your local dealer for
service.
All the illustrations in this manual are
schematic images, which may differ from
actual objects.
If you want to dispose of this product, do not
mix it with general household waste. There is
a separate collection system for used
electronic products in accordance with
legislation that requires proper treatment,
recovery and recycling.
Please contact your local authorities for the
correct method of disposal. By doing so, you
will ensure that your disposed product
undergoes the necessary treatment, recovery
and recycling and thus prevent potential
negative effects on the environment and
human health.
Utilization of the product
3
15

Connection
Connection
Connection
Antenna input
•Connect an external DVB-T/T2 antenna
(cable) connector to the antenna input RF IN.
The signal in the block cable antenna
can fail to contain DVB-T/T2 signal due to the
carrier frequency altered by the cable network
operator.
In order to receive digital air TV signal
use an indoor or outdoor UHF antenna.
Specify the possibility and quality of digital air
signal with your local digital TV service
providers. The absence of a stable TV signal in
your area can-not be a reason for returns or
refunds without an additional test of TV signal
reception in your area.
To increase the reception quality of the
state digital air television in rural areas or at
significant distances from a broadcasting
center we recommend using individual active
outdoor UHF antenna with a high resistance
factor, and placing them at maximum possible
heights.
Power adaptor input
•Connect the DC power adaptor to this
input and plug it into the electrical outlet.
HDMI-out
•If your TV has an HDMI video input,
connect it to an HDMI output of this unit using
an HDMI cable (included).
4
Stereo audio output
• Connect the left (white) and right (red)
terminals of the stereo audio output to the
corresponding audio inputs on your TV using
4
an RCA cable.
Video output
• Connect the yellow composite
video output to the composite video input on
your TV using an RCA cable.

Operation
Operation
Control elements
5
15
Front panel
Rear panel
7. Antenna input
8. USB port
9. HDMI output
10. Right composite audio output
11. Left composite audio output
12. Composite video output
13. DC 5V adapter socket
1. POWER button
2. MENU button
3. CH- button
4. CH+ button
5. Display
6. USB port
1 2 3 4 65
7 8 9 10 11 12 13
CH+ POWER MENU CH-
SM-DVBT280
HDMI DC 5V
AUDIO-R AUDIO-L VIDEO
USBRF IN

Operation
Operation
Remote control
6
Changing the battery
1. Remove the battery compartment cover
on the back of the RC.
2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.

Operation
Operation
General operations
STANDBY
When this unit is connected to the mains,
it goes into operation mode. When the unit is
running, press STANDBY button to turn the
device into sleep mode. In sleep mode, press
STANDBY button on the remote or press and
hold this button on the panel to turn the device
from sleep mode.
INFO
When viewing a TV channel, press this
button to display/hide the menu pages
containing various information about the current
channel (frequency, reception level etc.).
EPG
Press EPG button to display the menu of
the electronic TV guide (Electronic Program
Guide), which displays the schedule of
programs for a certain period of time for each
available channel. Using this function, you can
easily find programs you are interested in. Use
UP/DOWN cursor buttons to select the desired
TV program. Use LEFT/RIGHT cursor buttons
to switch pages of the interactive program
guide.
EPG-information cannot work if the
service is not provided by operator.
AUDIO
Press AUDIO to select the audio language
or audio channel, if this choice is supported by
the current channel.
CH+/CH-
Press these buttons to select the previous or
next channel.
OK
Press this button to confirm the selection
options in the menu.
VOL-/VOL+
Press these buttons to adjust the sound
volume level.
The number buttons
Press number buttons to enter the channel
number you want or other numbers (such as
passwords, play time, etc.).
REV/FWD
When playing a media file, press these
buttons for fast forward or backward playback.
PLAY/PAUSE
When playing a media file, press this button to
start or pause the playback.
Red/Green/Yellow/Blue buttons
Press the colored buttons to perform various
operations in the edit menu of channels,
teletext recording.
7
MUTE
Press this button to enable/disable the sound.
TEXT
Press this button to enable or disable the
Teletext (Teletext is not supported by some TV
channels).
REC
When a USB drive is connected to this unit,
while watching TV channels press REC to
start recording video from the channel to USB.
Press STOP button to stop recording.
15

Operation
8
Operation
SUBTITLE
Click this button to select subtitle language,
if this choice is supported by the current
channel.
TV/RADIO
Press this button to switch between TV and
radio.
RECALL
Click this button to select the last-viewed
channel.
PREV/NEXT
When playing a media file, press these
buttons to select previous/next file.
STOP
When playing a media file, press this button
to stop playback.
OSD operation Program
8
•OSD Language: select the language of the
system menu.
•Country: select your country.
•FTA Only: searching free-to-air
channels only.
•Search Mode: DVB-T2 or DVB-C.
•Antenna Power: select to enable an
external active antenna (if installed).
•Channel Search: press OK to start
automatic channel search.
1. Press MENU button to enter the setting
menu displayed on the screen.
2. Press LEFT/RIGHT cursor buttons on the
RC to select setting page.
3. Press OK button on the RC to go to the
parameter list.
4. Press UP/DOWN cursor buttons on the
RC to select a parameter to adjust.
5. Press LEFT/RIGHT cursor buttons on the
RC to adjust the selected parameter.
6. Press MENU button to return to the
previous menu page. Press EXIT button on the
RC to quit the menu.
Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.
Installation
When you start the unit for the first time, or
after resetting it to factory defaults, you will see
the Installation menu on the screen.
•Channel Edit: Access the
channel editor menu.
You can edit the channel list using the following
functions: favourite, move, skip, lock, delete.
Favorite: Select the program you want to
add to your list of favorites and press the FAV
button.
Move: Select the program you want to move,
press the button 2 and then OK, press UP/DOWN
to move it. Press the button 2 to again confirm
and exit.
Skip: Select the program you want to skip and
press the button 3 and then OK to skip it. Press 3
to again confirm and exit.
Lock: Select a program and press the
button 4; enter the password (000000 by default)
and press the button 4 and then OK to lock it.
Press 4 to again confirm and exit.

Operation
Operation
Time
9
Delete: Select the program you want to
delete and press the button 1 and then
OK. Press 1 to again confirm and exit.
•Program Guide: See «General
operations» for more details about
Electronic Program Guide.
•Antenna Power: select to enable an
external active antenna (if installed).
•Sort
Adjust the way the channels are sorted.
•LCN
Set logical channel number on/off.
•ACU
Update channels automatically.
•Volume Scope
Select the level of volume scope.
Search
available channels and save them.
•Manual Search: manually search for each
channel and save it.
•Country: select your country of residence.
Picture
•Search Mode: DVB-T2 or DVB-C.
•FTA Only: free-to-air channels only.
•Auto Search: automatically search for
•Aspect Ratio: Auto/16:9 Wide Screen/
16:9 Pillar Box/16:9 Pan & Scan/4:3 Letter
Box/4:3 Pan & Scan/4:3 Full. Press the
yellow button on RC to quickly access this
function.
•Resolution: 1080i/1080p/576i/576p/720p.
•OSD Settings: Set transparency/
brightness/chroma/contrast/OSD
Timeout of the on-screen display.
•Panel Setting: Set LED Brightness/
Display.
•TV Format: PAL/NTSC.
•Region and Time: set the GMT time zones
automatically or manually.
•Standby Showtime: set the time display at
standby on and off.
Press the blue button on RC to quickly access
this function.
•Sleep (HOUR): select time period after which
the unit will automatically switch to standby mode.
•Timer Setting: set the timer for recording.
unit will automatically power on and off.
•Power On/Off: select the time when the
15

Operation
Operation
System
•Parental Guidance: lock viewing of a
channel (first enter the original password
000000 or your own password).
•Set password: set or change the
10
password for the locked channels
(enter the original password 000000 or
your own password). You will then be
asked to enter a new password.
Note: if you forget your password use
the master password 876543.
•Restore Factory Default: reset all
settings to initial factory values. You will
be asked to enter the password.
Option
•OSD Language: select the on-screen
menu language.
•First Audio Language: select the audio
track first language if several languages are
supported. Second language is selected in
the same way.
• Subtitle language: select the subtitle
language.
•Digital Audio: select the digital
output type (Auto/PCM/Bypass).
10
•Information: view model, hardware and
software information.
•Software Update: update the unit's
software from a USB stick. Only for
qualified technicians.
•EPG Language: select the Electronic
Program Guide language.
• TTX language: select the Teletext
language.
•Network Setting: configure
the device to receive the Wi-Fi signal from
your home router. To connect, use external
Wi-Fi USB dongle (model MK7601). Select
the signal of your home router (you may
need to enter the router password). After
that, you can use the device to access
Internet services, such as YouTube, RSS,
IPTV and Weather.
This receiver cannot be used as a
device for full Internet access or performing
interactive OTT functions, as it does not
have a built-in Wi-Fi module, a WLAN input
or a LAN output. The function offered to you
is only of the character of additional (limited)
capabilities of the receiver.
USB
•Media Centre: if a USB storage
containing media files is connected to this
unit, press OK button to show the menu
in which you can select an icon to start
playback of corresponding supported
type file (File/Video/Music/Picture).
•PVR Configure: PVR and Timeshift
setting (see below).
•PVR Media: play PVR files.
•Power On Control: Power On/
Standby/Last State

Operation
Operation
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
TimeShift
• The Time Shift function allows you to re-
serve part of the USB-disk space and ensures
a continuous background recording of the se-
lected channel. Time Shift allows you to pause
watching or rewind recording back and resume
viewing from the missed point.
• After you activate the channel recording
(PVR, see “General Operations” paragraph),
press PAUSE button on the RC. Time Shift
function is activated, at the bottom of the
screen will be a status bar with countdown.
Now you can rewind the recorded video by
pressing REV/FWD buttons and set to pause
by pressing PAUSE button. You can also enter
timeshift by simply pressing the pause button
on the RC.
• To disable Time Shift, press EXIT button
on the RC and then press OK to confirm the
operation.
11
USB information
USB file systems supported: NTFS, FAT,
FAT32. 2.0 USB version is supported. For
correct and satisfactory operation, licensed USB
devices of famous brands should be used with
this unit; avoid using USB devices of unknown
brands. Maximum supported capacity is 2 TB.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
•Internet: access online
services such as YouTube, RSS, IPTV and
Weather. Internet connection is required via
Wi-Fi. Follow the on-screen instructions to
manage your applications.
IPTV: access to pre-installed IPTV servers
(the list may vary) and the option to
download a local playlist (MY IPTV) in the
***.m3u format. Place local playlists on a
USB stick and plug it into the USB port.
Press the INFO button on the remote control
and select a playlist from the list that
appears. To download a playlist, you must
remove the Wi-Fi dongle from the USB port
and insert the USB stick with playlists. After
downloading the list (you can download only
1 playlist), place the Wi-Fi dongle back.
When the download is completed, a list of
available channels will appear. If the
channels are not loaded, check the contents
of the playlist.
The screen menu of your unit can be
changed without prior notice and hence differ
from the menu represented in this Manual.
PVR and EPG
• Personal video recorder (PVR) is a feature
enabling you to record live TV. There are
three ways to use it:
• Insert a USB storage device in the USB
port and press the REC button on the RC.
• Schedule a specific program you want
to record using the blue button or from within
the EPG menu.
• To schedule a recording do the following:
-Press the EPG button
-Press the red button to add a schedule.
• Adjust the schedule settings as follows:
Mode: PLAY/PVR.
Type: Once/Daily/Mon/Tues/Wed/Thus /Fri/
Sat/Sun.
Start Date: Set the start date of recording.
Start Time: Set the start time.
Duration: Set the duration of recording.
Channel: Press OK then select the channel
that you want to record.
• Press OK to confirm and EXIT to
exit the scheduling menu.
15

General information
12
General information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Trouble Reason Solution
Standby indicator
is not on
The unit is not connected to the
power supply mains.
The power cable is poorly connected.
Check the connection to mains.
Check the cable.
No signal
The antenna is not connected.
The antenna is damaged/not
positioned.
Out of signal reception area.
Check if the antenna cable is
connected.
Position the antenna.
Turn to the service provider.
No image Wrong signal source is selected on
your TV.
Select the correct input signal
source.
No sound
The audio cable is poorly connected
or not connected
The sound is muted or its volume set
to minimum.
The audio track is not supported.
Connect the audio cable properly.
Increase the sound volume.
Select another sound track.
No responce from
the RC
The unit is switched off.
Wrong angle of RC usage or the front
panel if the unit is shielded.
The batteries in RC are exhausted.
Start the unit.
Use the RC at a correct angle or
uncover the front panel of the unit.
Change the batteries in the RC.
No DVBT signal
when setting up
the receiver
Insufficient level of the received
signal at the antenna input.
Check the connection and
integrity of the antenna amplifier
and its power lines.
Delays in TV
playback
Picture
interferences,
partial dropping
outs, picture
freezes, no sound
12

General information
13
General information
Accessories
1 pc
1 pc
1 pc
2 pcs
1 pc
1 pc
1. Player
2. Power adapter
3. Remote control
4. Battery
5. AV RCA cable
6. Instruction manual
13
Supported formats
Supported formats AVI, DAT, FLV, MKV, MOV, MP4, MPEG,
VOB, TS
Video codec support H.264, MPEG-1/2/4, XviD, DivX4
Audio codec support MPEG-1, MPEG-2 (Layer I/II), MP3, AAC, HE-
AAC
15

General information
14
General information
Specifications
14
178-226 MHz (VHF)
474-858 MHz (UHF)
+
+
+
+
+
Frequency range
Digital radio
PVR
Time Shift
Russian and English OSD
EPG
Signal level
Input stream
Video resolution
Video outputs
Audio outputs
Inputs
Nominal voltage
Input voltage of the adaptor
Output voltage of the adaptor
Nominal power consumption
Electric shock protection class
Storage temperature range
Operation temperature range
Unit dimensions
-82 to -25 dBm
up to 40 Mb/sec
576i/576p/720p/1080i/1080p(50 Hz)
Composite (CVBS) / HDMI
Stereo (RCA)
Antenna / USB
5 V, 1.5 A
100-240 V, ~50-60 Hz, 0.5 A
5 V, 1.5 A
5 W
II
~20°-60° C
~0°-45° C
120 x 27 x 63 mm
Warning: Specifications may be subject to change without notice for improvement.
MANUFACTURED FOR AND DISTRIBUTED BY TECHNO ELECTRIC LIMITED
Legal address: 1801-1802, LKF 29 29 Wyndham Street, Central, China

Содержание
15
Содержание
Уважаемый покупатель!
Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-
пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить
настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте
руководство для использования в будущем.
Содержание
Перед началом эксплуатации
Меры предосторожности
Утилизация изделия
Подключение
Подключение
Управление устройством
Элементы управления
Передняя и боковые панели
Задняя панель
Пульт дистанционного управления
Замена батарей
Общие операции
Экранное меню
Программа
Видео
Поиск каналов
Время
Опции
Система
USB
Информация по USB
Запись по таймеру
Отложенный просмотр
Общая информация
Устранение неисправностей
Комплект поставки
Поддерживаемые форматы
Технические характеристики
Гарантийный талон
15
16
16
16
17
17
18
18
18
18
19
19
20
21
21
22
22
23
23
23
24
25
25
25
26
26
27
27
28
29
15
15

Перед началом эксплуатации
16
Перед началом эксплуатации
16
Если вы желаете утилизировать данное
изделие, не выбрасывайте его вместе с
обычным бытовым мусором. Существует
отдельная система сбора использованных
электронных изделий в соответствии с
законодательством, которая предполагает
соответствующее обращение, возврат и
переработку.
Обращайтесь в органы местного
управления за инструкциями по правиль-
ной утилизации продукта. Тем самым Вы
обеспечите утилизацию Вашего изделия с
соблюдением обязательных процедур по
обработке, утилизации и вторичной пере-
работке и, таким образом, предотвратите
потенциальное негативное воздействие на
окружающую среду и здоровье людей.
Утилизация изделия
Меры предосторожности
• Чтобы предотвратить риск пожара
или удара током, избегайте попадания в
устройство воды и эксплуатации устройства
в условиях высокой влажности.
• Выключайте устройство из розетки,
если вы не собираетесь его использовать в
течение долгого времени.
• Не ставьте посторонние предметы на
корпус устройства.
• Поместите устройство в сухую и
проветриваемую область. Исключайте
соседство с нагревательными приборами,
не подвергайте воздействию солнечного
света, механической вибрации, влажности
и пыльной среды.
• Допустимо использование небольшого
количества нейтрального моющего сред-
ства для чистки устройства.
• Никогда не используйте абразивные
материалы или органические соединения
(алкоголь, бензин и т.д.) для чистки устрой-
ства.
• Для ремонта и технического обслужи-
вания обращайтесь только в уполномочен-
ные сервисные центры.
• Перед тем как подключить устройство
к сети питания, пожалуйста, убедитесь, что
сетевой кабель можно будет легко отклю-
чить в любой момент.
• Отключайте устройство от сети
электропитания и от кабеля телевизионной
антенны, если не собираетесь пользоваться
им длительное время, или перед грозой. Не
прикасаться во время грозы к устройству,
сетевому шнуру или кабелю антенны!
• Перед тем как включить устройство,
пожалуйста, убедитесь в надежности его
подключения к сети питания и другим
устройствам.
• Данное устройство может не принимать
телевизионный сигнал во время движения
в транспортном средстве.
• После длительного пребывания на
холоде перед включением необходимо
выдержать прибор в течение 1 часа при
комнатной температуре.
Перед использованием устройства
внимательно ознакомьтесь с руководством.
После прочтения сохраните его для исполь-
зования в будущем. При необходимости
свяжитесь с вашим местным дилером для
проведения сервисного обслуживания.
Все иллюстрации, приведенные в на-
стоящем руководстве, являются схе-
матическими изображениями, которые
могут отличаться от реальных объектов.

Подключение
Подключение
Подключение
Разъем для антенны
• Подсоедините внешнюю DVB-T/T-2
антенну (кабель) к разъему для антенны
ANT IN.
Сигнал в коллективной кабельной
антенне может не содержать DVB-T/T2-
сигнала в связи с изменением несущей
частоты оператором кабельной сети.
Для подключения цифрового
эфирного телевидения обязательно
используйте комнатную, либо внешнюю
телевизионную антенну дециметрового
(ДМВ) диапазона. Возможность и качество
приёма цифрового эфирного сигнала
вашего региона уточняйте у местных
поставщиков TV услуг. Отсутствие
устойчивого приёма цифрового вещания
не может являться причиной возврата без
проведения дополнительной проверки
качества приёма по месту приобретения.
Для улучшения приема
государственного цифрового эфирного
телевидения в сельской местности либо на
значительном удалении от передающего
телецентра рекомендуется использовать
активные индивидуальные наружные
антенны дециметрового диапазона с
высоким коэффициентом усиления и
размещать их на максимально возможной
высоте.
Разъем для адаптера
• Подсоедините адаптер питания к этому
разъему и подключите его к сети электро-
питания.
HDMI-выход
• Если телевизор видеосигнала имеет
HDMI-вход, подключите его к HDMI-выходу
данного устройства, используя специаль-
ный HDMI-кабель (не входит в комплект).
17
15
Стереоаудиовыход
• Подсоедините левый (белый) и правый
(красный) разъемы стереоаудиовыхода к
соответствующим аудиовходам
телевизора с помощью входящего в
комплект RCA-кабеля.

Управление устройством
18
Управление устройством
Элементы управления
Передняя панель
18
7. Антенный вход
8. USB-порт
9. HDMI-выход
10. Правый композитный аудиовыход
11. Левый композитный аудиовыход
12. Композитный видеовход
13. Разъем для адаптера питания
Задняя панель
1. Кнопка POWER
2. Кнопка MENU
3. Кнопка CH-
4. Кнопка CH+
5. Дисплей
6. USB-порт
1 2 3 4 65
CH+ POWER MENU CH-
SM-DVBT280
7 8 9 10 11 12 13
HDMI DC 5V
AUDIO-R AUDIO-L VIDEO
USBRF IN

Управление устройством
Управление устройством
Пульт дистанционного управления
19
15