Source Audio True Spring Reverb User manual

Quick Start Reference Card
POWER
Power your TRUE SPRING with the included power supply. If you are using pedalboard power, be sure to use a
regulated 9 Volt DC output that can source at least 150mA.
MAIN CONTROLS
MIX – Relative level of the dry and wet signals. 50/50 at 3 o'clock.
LEVEL – Sets the overall output level.
DWELL– Controls the intensity of the reverb - how hard the “springs” are being driven
TONE– Tone control over the wet signal.
SHORT – Normal amp spring reverb
LONG – Longer amp spring reverb
TANK – Outboard spring reverb tank
TREMOLO CONTROLS – HOLD DOWN THE CONTROL BUTTON WHILE TURNING KNOB
MIX – No change
LEVEL – No change
DWELL– Controls Tremolo depth
TONE– Controls Tremolo speed
SHORT – Opto tremolo (from the Source Audio Vertigo Tremolo)
LONG – Harmonic tremolo (from the Source Audio Vertigo Tremolo)
TANK – Bias Tremolo (from the Source Audio Vertigo Tremolo)
NEURO DESKTOP EDITOR – CONNECT VIA USB
Access additional editable parameters, spring lengths, signal routing and other hardware
controls. Publish and browse preset libraries. Connect your True Spring pedal to a Mac
or Windows PC and download the Neuro Desktop Editor.
NEURO MOBILE APP– CONNECT VIA PHONE
Use the supplied cable from your iOS or Android device headphone jack to INPUT 2 on
the pedal to access the Neuro world of presets and controls on-the-go.
USERS GUIDE – NEURO EDITOR – NEURO MOBILE - SUPPORT
www.sourceaudio.net/products/true_spring

Accessing the tremolo controls on your True Spring Reverb
USERS GUIDE – NEURO EDITOR – NEURO MOBILE - SUPPORT
www.sourceaudio.net/products/true_spring
PRESS and Hold the CONTROL button
while making adjustments.