Southern MS040400TX User manual

.
PO:13862
MS040400TX
Kenwick Media Console
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
www.seifurniturestore.com

A Quantity
of 24
Wood Dowel (¢8x30mm)
B Quantity
of 24
Cam Bolt
C Quantity
of 24
Cam Lock
D Quantity
of 8
Cover
E Quantity
of 4
Screw (¢1/8”*0.625”)
F Quantity
of 2
Magnet
G Quantity
of 10
Bolt (¢5/32x16mm)
H Quantity
of 5
Handle
Kenwick Media Console
Parts ist
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage.

I Quantity
of 24
Screw (¢1/8”x1”)
J Quantity
of 22
Screw (¢1/8”x1/2”)
K Quantity
of 8
Shelf pin
L Quantity
of 4
Door Pin
1 Quantity
of 1
Fixed Shelf
2Quantity
of 1
Bottom Panel
3 Quantity
of 1
Left Lower Vertical Panel
4 Quantity
of 1
Right Lower Vertical Panel
5 Quantity
of 1
Left Side Panel
6 Quantity
of 1
Right Side Panel
7 Quantity
of 1
Center Leg
8 Quantity
of 1
Upper Vertical Panel
9 Quantity
of 1
Top Panel

10 Quantity
of 3
Drawer Front
11 Quantity
of 3
Left Drawer Side
12 Quantity
of 3
Right Drawer Side
13 Quantity
of 3
Drawer Back
14 Quantity
of 3
Drawer Bottom
15 Quantity
of 1
Back Panel
16 Quantity
of 1
LeftAdjustable Shelf
17 Quantity
of 1
Right Adjustable Shelf
18 Quantity
of 1
Left Door
19 Quantity
of 1
Right Door
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the finish.
Avoid rubbing or scratching the surface with rough or
abrasive objects.
Call customer service at 1-800-633-5096 for assistance,
questions, or parts.
Assembly Tool Required:
No.2 Phillips Screwdriver (No Included)

Figure 1
Attach Magnets (F) to Fixed Shelf
Panel (1) with screws (E).
Tighten screws with Phillips
Screwdriver (not included)
Please do not overtighten cam locks. Stop when they feel secure.
Figure 2
Insert 4pcs Cam Locks (C) into
holes on Lower Vertical Panels
(3/4).
Screw Cam Bolts (A) into holes
on Bottom Panel (2).
Attach Lower Vertical Panels
(3/4) to Bottom Panel (2) by
inserting Wood Dowels (A) and
Cam Bolts (C) into corresponding
holes until Panels meet.
Tighten by rotating Cam Locks
(C) clockwise with Phillips
Screwdriver (not included).
Kenwick Media Console
Assembly Instructions

Figure 3
Insert Cam Locks (C) into holes
on Lower Vertical Panels (3/4).
Screw Cam Bolts (A) into holes
on Fixed Shelf Panel (1).
Attach pre-assembled unit from
Figure 2 to Fixed Panel (1) by
inserting Wood Dowels (A) and
Cam Bolts (C) into corresponding
holes until Panels meet.
Tighten by rotating Cam Locks
(C) clockwise with Phillips
screwdriver (not included).
Figure 4
Insert Cam Locks (C) into holes
on pre-assembled unit from
Figure 3.
Screw Cam Bolts (A) into holes
on Side Panels (5/6).
Attach pre-assembled unit from
Figure 3 to Side Panels (5/6) by
inserting Wood Dowels (A) and
Cam Bolts (C) into corresponding
holes until Panels meet.
Tighten by rotating Cam Locks
(C) clockwise with Phillips
screwdriver (not included).
Attach Center Leg (7) to Bottom
Panel (2) by hand.

Figure 5
Insert Cam Locks (C) into holes
on Upper Vertical Panel (8).
Screw Cam Bolts (A) into holes
pre-assembled unit from Figure
4.
Attach pre-assembled unit from
Figure 4 to Upper Vertical Panel
(8) by inserting Wood Dowels (A)
and Cam Bolts (C) into
corresponding holes until Panels
meet.
Tighten by rotating Cam Locks
(C) clockwise with Phillips
Screwdriver (not included).
Figure 6
Insert Cam Locks (C) into holes
on pre-assembled unit from
Figure 5.
Screw Cam Bolts (A) into holes
on Top Panel (9).
Attach pre-assembled unit from
Figure 5 to Top Panel (9) by
inserting Wood Dowels (A) and
Cam Bolts (C) into corresponding
holes until Panels meet.
Tighten by rotating Cam Locks
(C) clockwise with Phillips
screwdriver (not included).

Figure 7
Attach Left Drawer Side Panel
(11) and Right Drawer Side
Panel (12) to Drawer Front Panel
(10) with Screws (I).
Tighten Screws with Phillips
Screwdriver (not included).
Insert Drawer Bottom Panel (14)
into the corresponding groove of
Left Drawer Side Panel (11),
Right Drawer Side Panel (12),
and Drawer Front Panel (10).
Attach Drawer Back Panel (13) to
Drawer Side Panels (11/12) by
matching the grooves.
Tighten Screws with Phillips
Screwdriver (not included).
Attach Handle (H) to Drawer
Front (10) with Bolts (G).
Tighten Bolts with Phillips
Screwdriver (not included).
Figure 8
Attach Back Panel (15) to
pre-assembled unit from Figure 6
with Screws (J).
Tighten screw with Phillips
Screwdriver (not included).

Figure 9
Insert Shelf Pins (K) into
corresponding holes
on
pre-assembled unit from Figure
8.
Insert Adjustable Shelves (16/17)
onto Shelf Pins (K).
Figure 10
Insert Door Pins (L) in to
corresponding holes on Doors
(18/19).
Attach Doors (18/19) to
pre-assembled unit from Figure 9
by hand.
Attach Handles (H) to Doors
(18/19) with Bolts (G).
Tighten bolt with Phillips
Screwdriver (not included).

Figure 11
Insert pre-assembled drawers
from Figure 7 into pre-assembled
unit from Figure10.
Note:
Ensure drawer's male ball
bearings slide into side panel’s
female ball bearings.
Make sure ball bearings slide in
and out smoothly.
F12
Now your Kenwick Media
Console is ready to use!

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s).If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at serv[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019

CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 46” and
supports up to 85 lb.
The top shelf is NOT INTENDED for tube televisions.
Each VCR shelf should not be loaded with more than 20 lb
Each side shelf should not be loaded with more than 15 lb.
DO NOT EXCEED RECOMMENDED OAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on under side of top shelf or inside
drawer.
Do not allow children under 16 years to move the cart.
Model: MS040400TX
Kenwick Media Console
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 11/28/2015
Table of contents
Other Southern Indoor Furnishing manuals
Popular Indoor Furnishing manuals by other brands

Corriveau
Corriveau KT4070G-008 Assembly instruction

Metro DataVac
Metro DataVac MetroSHINGLE Installation details

Intercon
Intercon SM-BR-8865K-TUS-FB Assembly instruction

Hillsdale Furniture
Hillsdale Furniture 2874-500 Assembly instruction

Community Playthings
Community Playthings A281 Product guide

MotoSleep
MotoSleep Tilt Soft Form Series owner's manual

milliard
milliard MIL-CCH manual

Cooper Lighting
Cooper Lighting HALO H2BSMLRG specification

Solid Wood Kitchen Cabinets
Solid Wood Kitchen Cabinets W500-600 Assembly guide

Draper
Draper LightBloc Zip installation instructions

Sunnydaze Decor
Sunnydaze Decor DMR-439 manual

KI
KI Grazie Operating and care instructions