Sp Air SKJ-CRS02 User manual

DWM-060-M-21(1)
FOLD SIZE: 75 x 110mm
Sterilizing Water Maker
SKJ-CRS02

Warnings and Safety Precautions
WARNING!
Read all instructions carefully before using this product.
1. The sodium hypochlorite produced by this product is for external
sterilization only. DO NOT drink the solution, and the product must be
placed out of children’s reach at all times.
2. During the generation process of the sodium hypochlorite, DO NOT
operate the product for other uses to avoid damaging it.
3. During the generation process of sodium hypochlorite, yellow
occurrence. This is due to the abundance of iron ions in the water.
Using salt with potassium ferrocyanide will also result in yellow
4. The generated sterilizer should be used right away, otherwise the
concentration may decrease due to factors like light and temperature.
Shortening the time sterilizer staying in the container also helps to
extend the service life of the product.
5. Sodium hypochlorite sterilizer may corrode metals, please use with
care.
6. it may cause a discoloring effect.
7. DO NOT use the sodium hypochlorite sterilizer together with alcohol,
vinegar, toilet cleaner or concentrated sulfuric acid.
8. DO NOT place the sterilizer in the water tank for extended use.
9. If the product will not to be used for a prolonged period, remove the
nozzle, place the bottle upside down to let it dry completely before
storage.
10. When cleaning, use a dry cloth or slightly damp cloth to wipe the
product surface. DO NOT use detergents or other sprays for cleaning.
11. with clean water.
12.
13. 50°C, otherwise it may cause the product to malfunction.
14. If the product or bottle is damaged, stop using it immediately to
minimize the risk of explosion.
15.
DO NOT wash the external parts of the product with water, as the
main body of the product is not waterproof.
16.
If strange noises, odour or smoke / gas is detected, unplug the
product immediately and contact German Pool Customer Service and
Repair Centre.

Product Structure
Lid
Bottle
Maximum Water
Mark
Atomizer Nozzle
Product Base
Power Supply
Interface
Touch Key

Operating Instructions
1.
2. Add a suitable amount of refined salt into the water, shake the
bottle for approx. 30-60 seconds to let the refined salt to dissolve
completely.
3. Connect the product to the power source. The product will enter
standby status, buzzer will beep once, indicator light will light up in
blue for 2 seconds then go dark.
4. Press the Touch Key to cycle between Low Concentration Mode and
High Concentration Mode. Buzzer will beep once every time the key is
pressed.
5. After desired mode is selected, if there is no command input in 3
seconds, the product will automatically enter sterilizer-generating
status. If user wishes to stop the sterilizer-generating process, simply
unplug the power source.
Indicator Light
Solution components
Preparation time
Sterilizer concentration
Usage
Suitable for
Low Concentration
Mode
Lights up constant in
white
Lights up constant in
blue
60 ml water 60 ml water
4 minutes 10 minutes
approx. 100 ppm approx. 200 ppm
Sterilization, degrade
pesticides
Sterilization,
deodorization,
bleaching
Toothbrush, pet
product, toy, air
conditioner, shoe
cabinet, towel, bedding,
fruit and vegetable,
kitchen utensil
Bathroom, trash bin,
sewer, moldy area
High Concentration
Mode
WARNING!

If there is any inconsistency or ambiguity between the English version and the Chinese
version, the Chinese version shall prevail.
Refer to www.germanpool.com for the most updated version of the Operating Instructions.
WARNING!
When sterilizer is being generated, the atomizer nozzle MUST be removed,
and DO NOT touch the bottle to avoid spillage.
6. After sterilizer-generating process is completed, the indicator light
Product returns to standby status.
7. Screw on the atomizer nozzle, and press the nozzle to spray the
sterilizer.
Cleaning and Maintenance
WARNING!
Unplug the product from the power source before cleaning and maintenance.
DO NOT immerse the product in water or other liquids.
• Use dry or slightly damp cloth to wipe the surface of the product. DO
NOT use cleaning agents or other sprays to clean the product.
• The base of the product is not waterproof. DO NOT use water to clean
the exterior parts of the product.
• If product will not be used for an extended period of time, remove the
atomizer nozzle, and turn the bottle upside down to air dry completely
before storing it away.
• If the product or bottle is damaged, stop using the product
immediately, and contact German Pool Customer Service and Repair
Centre.
Model
Voltage
Power
Net Weight
SKJ-CRS02
DC 5V
5 W
120 g