
360 Floating Seat | PAGE 2
Step 1
Install the three floating seat dampers as shown using the six 5/16” flange bolts and serrated nuts
onto the lower seat plate.
Step 2
Install the upper seat plate to the lower seat plate using the three 3/8” carriage bolts through the upper seat plate,
dampers, large 3/8” washer and then the 3/8” nylon nut and tighten securely.
Step 3
Remove the seat plate latch (if equipped) from the old seat plate by removing the 9/16” nylon nut from the seat
latch, the 5/16” serrated nut and stud and install onto the new 360 floating seat plate. When installing the 3/8”
nylon nut, do not tighten all the way down on the seat latch rod.