SPC Cucina Primo 2000 100006 User manual

Massstab: Angepasst
SPC Electronics AG
Mövenstrasse 12
9015 St. Gallen
Tel. [phone]
Fax
Projekt-Nr.: 3/1/1
Projektname: Cucina Primo 2000, weiss
Modell: B17 Baku
Ausdruck: 15.09.2020
Kunde:
SPC Electronics AG
Tel.
Objekt:
SPC Electronics AG
Tel.
1
2
3
4
1
2
3
4
2 8
1
6 74
4.2
3 5
5.1
18 19
20
109
13
11
17
12 16
15
14
21
200 600 184 16 600 600 600 600 600 16 284
984 16 600 600 600 600 600 16 284
4300
7009002400
4000
40025001400
4300
4000

Wand - 1 / Massstab: Angepasst
SPC Electronics AG
Mövenstrasse 12
9015 St. Gallen
Tel. [phone]
Fax
Projekt-Nr.: 3/1/1
Projektname: Cucina Primo 2000, weiss
Modell: B17 Baku
Ausdruck: 15.09.2020
Kunde:
SPC Electronics AG
Tel.
Objekt:
SPC Electronics AG
Tel.
984 16 600 600 600 600 600 16 284
4300
200 600 184 16 600 600 600 600 600 16 284
100 780 39 546 40 610 285
100 919 1465 2115 2400
2400
1816 1216
5545
6510
15
85 100 11012075
13070
60
35
150 160
155
165
135

Wand - 1 / Massstab: Angepasst
SPC Electronics AG
Mövenstrasse 12
9015 St. Gallen
Tel. [phone]
Fax
Projekt-Nr.: 3/1/1
Projektname: Cucina Primo 2000, weiss
Modell: B17 Baku
Ausdruck: 15.09.2020
Kunde:
SPC Electronics AG
Tel.
Objekt:
SPC Electronics AG
Tel.
500
1200
1700
1900
2100
3100
3750
400
600
830830
11001100
1965
Steckdose
Ablauf links, Warm-/Kaltwasser, Steckdose Typ 15
Steckdose
Steckdose
Steckdose
Steckdose Steckdose
4300
2400

48
I N S T A L L A TION S
SEM I - I N T E G R A TED
FULL Y - I NTE G R A T E D

560mm
590mm
Min. Gap
5mm
Neighbourhood walls
Wood
A [mm]
40 40
25
25
B [mm]
Concrete or ceramic tiled
Installation of 60cm Induction Hob
Min. A
Min. B
Min. 175mm

INSTALLATION (VENT OUTSIDE)
INSTALLATION (Wall Mounting)
(1) Decide the location of the holes for fixing the cooker hood.
(2) Install the Valve.
(3) Install the two small L-shaped bracket on the top of the hood by two
screws (4mm x 10mm)
Knob on the top

(4) Fix the one-way-valve to the air outlet of the cooker hood.
(5) The cooker hood is wall mounted by 4 screws (4mm x 30mm) and wall
plugs.
Mount the cooker hood on the wall on the back of the cooker hood by 2
screws (4mm x 30mm) and wall plugs. Then fix the cooker hood on
the wall by 2 screws (4mm x 30mm) and wall plugs through the small
L-shaped bracket.
2 x screws（4mm x 10 mm）
4 x screws (4mm x 30 mm)

(6) Hang the appliance onto the wall.
(7) Attach the exhaust pipe (not included) onto the one-way-valve as
shown below.
INSTALLATION (Cabinet Mounting)
(1) Install the Valve.

(2) Fix the one-way-valve to the air outlet of the cooker hood.
(3) Mount the cooker hood on the cabinet by 6 screws (4mmx35mm)
and flat washers.
Knob on the top

If there is gap between the wall and the cooker hood, you may Install the
L-shaped bracket on the bottom of the hood by two screws (3 x 12mm).
The installation of the L-shaped bracket is optional.
2 x screws (3mm x 12mm)