Speco PMT1 User manual

Pole Mount
Quick Start Guide
Thank you for purchasing our product. All examples and pictures used in the
manual are only for reference purpose.
Installation
Pole mounting examples
Here we only take some camera models for example to introduce their pole
mounting with the junction box and other brackets.
PMT1

Pole Mounting of Dome Camera with Wall Mount
1. Loosen the lock screw to remove
the mounting base.
2. Fix the wall mount to the pole mount
with the bolts and nuts provided.
Lock screw Wall mount
3. Install the pole mount to the
pillar.
4. Screw the mounting base of the dome
camera onto the wall mount.
5. Route and connect cables. Then
mount the camera to the mounting
base.
6. Fix the camera with lock screw.

Pole Mounting of Bullet Camera with Junction Box
Pole Mounting of Bullet Camera
1. Open the covers of the junction box. 2. Screw the camera to the upper cover
of the junction box.
3. Fix the lower cover of the junction
box to the pole mount with the
provided.
bolts
and nuts
1. Fix the bullet camera to the pole
mount with screws provided.
2. Connect cables and then fasten the
the pole mount to the .pillar
4. Install the pole mount to the pillar.
Then connect cables and fasten the
upper cover with the camera to the
junction box.
Upper cover
Lower cover

Pole Mounting of PTZ Camera with Wall Mount
5. Connect cables and then hang the PTZ
camera to the base tray. Hook the safety
wire to the wall mounting bracket as well.
4. Fasten the pole mount to the pillar.
1. Remove the base tray from the PTZ
camera.
2. Install the base tray to the wall mounting
bracket with screws.
Base tray
3. Fix the wall mounting bracket onto
the pole mount with the bolts and nuts
provided.
6. Fix the PTZ camera to the base tray
with screws.
450043000723 A1