Spectrum Industries 95036 User manual

0193136 Page 1 of 2
Assembly InstructionsAssembly Instructions
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts or
accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Undermount Rack Cabinet
for Pivot Premier
95036
(1) 0167303
Bottom Panel
(4) 050184
10-32 x 5/8” PHMS
(4) 053281
Rack rail (12.25”)
(16) 026064
1/4-20 x 5/8” PHMS (8) 0106543 1/4-20 Keps nut
(2) 0167301
Side panel
Assembly tip: Do not tighten component fasteners completely
until all have been installed. Keeping them loose will help with
alignment between parts during assembly.
(8) 0101382
#14 x 7/8” PHSM
Note: The 95036 Undermount Rack Cabinet is not
compatible with an installed Undermount AV Channel.
(1) 0167302
Top panel
Assemble rack cabinet
1
Side panel
Side panel
Bottom panel
Top panel
Rack Rail
(4) 1/4-20 x 5/8”
PHMS
(4) 1/4-20
Keps nut
(4) 10-32 x 5/8”
PHMS

Be careful not to strip screw
holes during installation
0193136 Page 2 of 2 © 2022 Spectrum Industries Inc., All rights reserved.
1500 RIVER STREET, PO BOX 400, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
#14 x 7/8” PHSM
(8 total)
Rack assembly
Attach rack cabinet to worksurface
2